linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Abhishek Sahu <absahu@codeaurora.org>
To: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mtd@lists.infradead.org, Andy Gross <andy.gross@linaro.org>,
	Archit Taneja <architt@codeaurora.org>,
	Abhishek Sahu <absahu@codeaurora.org>
Subject: [PATCH 0/9] Update for QCOM NAND driver
Date: Wed,  4 Apr 2018 18:12:16 +0530	[thread overview]
Message-ID: <1522845745-6624-1-git-send-email-absahu@codeaurora.org> (raw)

This patch series mainly deals with error handling and erased page
bitflip detection for QCOM NAND driver.

1. The error handling was missing for some of the cases so fixed
   the same.

2. Add the support for taking ECC strength from ONFI parameter.
   The earlier QCOM boards were coming with 4-bit ECC chip but
   now the same boards are coming with 8-bit ECC chip since the
   earlier 4-bit parts are obsolete from some vendors.

3. We got few issues related with NAND erased page bitflips. The
   QCOM NAND controller can’t detect the bitflip in completely erased
   page so added the support to detect the same. It implemented the
   logic mentioned in patch [1] which didn’t go in mainline and later
   the generic functions were provided [2] to count the number of
   bitflips and make all 0xff. This patch series did some optimization
   logic to prevent the unnecessary full page raw read and data copy
   from QCOM NAND controller to DMA.

4. Following are the testing done for these patches in QCOM IPQ8074
   HK01 (4-bit and 8-bit ECC chip) and IPQ806x AP148 boards.
    a. Run all mtd test and check if it passes
    b. Introduce custom bitflips in erased page and check if it
       returns no error/EUCLEAN/EBADMSG depending upon number of
       bitflips and position.
    c. Introduce failure condition for operational failure and
       check if it detects the same.

[1]: https://patchwork.ozlabs.org/patch/328994/
[2]: https://patchwork.ozlabs.org/patch/509970/

Abhishek Sahu (9):
  mtd: nand: qcom: use the ecc strength from device parameter
  mtd: nand: qcom: wait for desc completion in all BAM channels
  mtd: nand: qcom: erased page detection for uncorrectable errors only
  mtd: nand: qcom: fix null pointer access for erased buffer detection
  mtd: nand: qcom: parse read errors for read oob also
  mtd: nand: qcom: support for checking read errors for last codeword
  mtd: nand: qcom: check for operation errors in case of raw read
  mtd: nand: qcom: helper function for raw read
  mtd: nand: qcom: erased page bitflips detection

 drivers/mtd/nand/qcom_nandc.c | 468 ++++++++++++++++++++++++++++++------------
 1 file changed, 333 insertions(+), 135 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

             reply	other threads:[~2018-04-04 12:42 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-04 12:42 Abhishek Sahu [this message]
2018-04-04 12:42 ` [PATCH 1/9] mtd: nand: qcom: use the ecc strength from device parameter Abhishek Sahu
2018-04-06 12:31   ` Miquel Raynal
2018-04-10  6:09     ` Abhishek Sahu
2018-04-10  7:46       ` Miquel Raynal
2018-04-10  7:55         ` Miquel Raynal
2018-04-10  8:07           ` Boris Brezillon
2018-04-12  9:59             ` Abhishek Sahu
2018-04-22 16:34               ` Miquel Raynal
2018-04-23  6:44                 ` Abhishek Sahu
2018-04-04 12:42 ` [PATCH 2/9] mtd: nand: qcom: wait for desc completion in all BAM channels Abhishek Sahu
2018-04-04 12:42 ` [PATCH 3/9] mtd: nand: qcom: erased page detection for uncorrectable errors only Abhishek Sahu
2018-04-10  8:59   ` Miquel Raynal
2018-04-12  6:33     ` Abhishek Sahu
2018-04-12  6:49       ` Miquel Raynal
2018-04-12  6:58         ` Abhishek Sahu
2018-04-04 12:42 ` [PATCH 4/9] mtd: nand: qcom: fix null pointer access for erased buffer detection Abhishek Sahu
2018-04-10  9:12   ` Miquel Raynal
2018-04-12  6:54     ` Abhishek Sahu
2018-04-22 16:25       ` Miquel Raynal
2018-04-23  6:29         ` Abhishek Sahu
2018-04-04 12:42 ` [PATCH 5/9] mtd: nand: qcom: parse read errors for read oob also Abhishek Sahu
2018-04-10 10:03   ` Miquel Raynal
2018-04-12  7:10     ` Abhishek Sahu
2018-04-04 12:42 ` [PATCH 6/9] mtd: nand: qcom: support for checking read errors for last codeword Abhishek Sahu
2018-04-10 10:05   ` Miquel Raynal
2018-04-04 12:42 ` [PATCH 7/9] mtd: nand: qcom: check for operation errors in case of raw read Abhishek Sahu
2018-04-10 10:12   ` Miquel Raynal
2018-04-12  7:33     ` Abhishek Sahu
2018-04-04 12:42 ` [PATCH 8/9] mtd: nand: qcom: helper function for " Abhishek Sahu
2018-04-10  9:44   ` Miquel Raynal
2018-04-12  7:06     ` Abhishek Sahu
2018-04-22 16:19       ` Miquel Raynal
2018-04-23  6:28         ` Abhishek Sahu
2018-04-23  6:58           ` Miquel Raynal
2018-04-25  6:32             ` Abhishek Sahu
2018-04-25 12:59               ` Miquel Raynal
2018-04-26  5:53                 ` Abhishek Sahu
2018-04-26  7:11                   ` Miquel Raynal
2018-04-26  7:42                     ` Abhishek Sahu
2018-04-04 12:42 ` [PATCH 9/9] mtd: nand: qcom: erased page bitflips detection Abhishek Sahu
2018-04-10 10:30   ` Miquel Raynal
2018-04-12  8:00     ` Abhishek Sahu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1522845745-6624-1-git-send-email-absahu@codeaurora.org \
    --to=absahu@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=architt@codeaurora.org \
    --cc=boris.brezillon@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@wedev4u.fr \
    --cc=dwmw2@infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).