From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Lew Subject: [PATCH v3 1/6] dt-bindings: soc: qcom: Add label for GLINK bindings Date: Thu, 26 Apr 2018 15:59:00 -0700 Message-ID: <1524783545-21951-2-git-send-email-clew@codeaurora.org> References: <1524783545-21951-1-git-send-email-clew@codeaurora.org> Return-path: In-Reply-To: <1524783545-21951-1-git-send-email-clew@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: bjorn.andersson@linaro.org, andy.gross@linaro.org, david.brown@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com Cc: aneela@codeaurora.org, linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org, linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, clew@codeaurora.org List-Id: linux-arm-msm@vger.kernel.org There are GLINK clients who open the same channel on multiple GLINK links. These clients need a way to distinguish which remoteproc they are communicating to. Add a label property to identify the edge this node represents. Signed-off-by: Chris Lew --- Changes since v1: - Add explanation for label in commit message Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt index 9663cab52246..0b8cc533ca83 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt @@ -10,6 +10,11 @@ edge. Value type: Definition: must be "qcom,glink-rpm" +- label: + Usage: optional + Value type: + Definition: should specify the subsystem name this edge corresponds to. + - interrupts: Usage: required Value type: -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project