[DPU PATCH v2 04/14] drm/msm/dpu: program master-slave encoders explicitly

[Sravanthi Kollukuduru <skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]

From: Jeykumar Sankaran <jsanka@codeaurora.org>

Identify slave-master encoders and program them explicitly.

changes in v2:
     - none

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 41 ++++++++++++++++-------------
 1 file changed, 23 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 11a1045..e98cf70 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -184,6 +184,7 @@ struct dpu_encoder_virt {
 	unsigned int num_phys_encs;
 	struct dpu_encoder_phys *phys_encs[MAX_PHYS_ENCODERS_PER_VIRTUAL];
 	struct dpu_encoder_phys *cur_master;
+	struct dpu_encoder_phys *cur_slave;
 	struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
 
 	bool intfs_swapped;
@@ -1170,35 +1171,48 @@ void dpu_encoder_virt_restore(struct drm_encoder *drm_enc)
 static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 {
 	struct dpu_encoder_virt *dpu_enc = NULL;
+	struct dpu_encoder_phys *phys  = NULL;
 	int i, ret = 0;
-	struct drm_display_mode *cur_mode = NULL;
 
 	if (!drm_enc) {
 		DPU_ERROR("invalid encoder\n");
 		return;
 	}
 	dpu_enc = to_dpu_encoder_virt(drm_enc);
-	cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
 
 	DPU_DEBUG_ENC(dpu_enc, "\n");
-	DPU_EVT32(DRMID(drm_enc), cur_mode->hdisplay, cur_mode->vdisplay);
 
 	dpu_enc->cur_master = NULL;
+	dpu_enc->cur_slave = NULL;
 	for (i = 0; i < dpu_enc->num_phys_encs; i++) {
-		struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
+		phys = dpu_enc->phys_encs[i];
+
+		if (!phys || !phys->ops.is_master)
+			continue;
 
-		if (phys && phys->ops.is_master && phys->ops.is_master(phys)) {
-			DPU_DEBUG_ENC(dpu_enc, "master is now idx %d\n", i);
+		if (phys->ops.is_master(phys)) {
+			DPU_DEBUG_ENC(dpu_enc, "master is at idx %d\n", i);
 			dpu_enc->cur_master = phys;
-			break;
+		} else {
+			DPU_DEBUG_ENC(dpu_enc, "slave is at idx %d\n", i);
+			dpu_enc->cur_slave = phys;
 		}
 	}
 
 	if (!dpu_enc->cur_master) {
-		DPU_ERROR("virt encoder has no master! num_phys %d\n", i);
+		DPU_ERROR("virt encoder has no master identified\n");
 		return;
 	}
 
+	/* always enable slave encoder before master */
+	phys = dpu_enc->cur_slave;
+	if (phys && phys->ops.enable)
+		phys->ops.enable(phys);
+
+	phys = dpu_enc->cur_master;
+	if (phys && phys->ops.enable)
+		phys->ops.enable(phys);
+
 	ret = dpu_encoder_resource_control(drm_enc, DPU_ENC_RC_EVENT_KICKOFF);
 	if (ret) {
 		DPU_ERROR_ENC(dpu_enc, "dpu resource control failed: %d\n",
@@ -1207,25 +1221,16 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
 	}
 
 	for (i = 0; i < dpu_enc->num_phys_encs; i++) {
-		struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
-
+		phys = dpu_enc->phys_encs[i];
 		if (!phys)
 			continue;
 
-		if (phys != dpu_enc->cur_master) {
-			if (phys->ops.enable)
-				phys->ops.enable(phys);
-		}
-
 		if (dpu_enc->misr_enable && (dpu_enc->disp_info.capabilities &
 		     MSM_DISPLAY_CAP_VID_MODE) && phys->ops.setup_misr)
 			phys->ops.setup_misr(phys, true,
 						dpu_enc->misr_frame_count);
 	}
 
-	if (dpu_enc->cur_master->ops.enable)
-		dpu_enc->cur_master->ops.enable(dpu_enc->cur_master);
-
 	_dpu_encoder_virt_enable_helper(drm_enc);
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno