From: Raju P L S S S N <rplsssn@codeaurora.org>
To: andy.gross@linaro.org, david.brown@linaro.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
Cc: rnayak@codeaurora.org, bjorn.andersson@linaro.org,
linux-kernel@vger.kernel.org, sboyd@kernel.org,
evgreen@chromium.org, dianders@chromium.org, mka@chromium.org,
ilina@codeaurora.org, "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
Subject: [PATCH 5/6] drivers: qcom: rpmh-rsc: write PDC data
Date: Thu, 19 Jul 2018 14:49:34 +0530 [thread overview]
Message-ID: <1531991975-23665-6-git-send-email-rplsssn@codeaurora.org> (raw)
In-Reply-To: <1531991975-23665-1-git-send-email-rplsssn@codeaurora.org>
From: Lina Iyer <ilina@codeaurora.org>
The Power Domain Controller can be programmed to wakeup the RSC and
setup the resources back in the active state, before the processor is
woken up by a timer interrupt. The wakeup value from the timer hardware
can be copied to the PDC which has its own timer and is in an always-on
power domain. Programming the wakeup value is done through a separate
register on the RSC.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
---
drivers/soc/qcom/rpmh-internal.h | 3 +++
drivers/soc/qcom/rpmh-rsc.c | 36 ++++++++++++++++++++++++++++++------
2 files changed, 33 insertions(+), 6 deletions(-)
diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
index 6cd2f78..f5359be 100644
--- a/drivers/soc/qcom/rpmh-internal.h
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -87,6 +87,7 @@ struct rpmh_ctrlr {
* Resource State Coordinator controller (RSC)
*
* @name: controller identifier
+ * @base: start address of the RSC's DRV registers
* @tcs_base: start address of the TCS registers in this controller
* @id: instance id in the controller (Direct Resource Voter)
* @num_tcs: number of TCSes in this DRV
@@ -97,6 +98,7 @@ struct rpmh_ctrlr {
*/
struct rsc_drv {
const char *name;
+ void __iomem *base;
void __iomem *tcs_base;
int id;
int num_tcs;
@@ -111,6 +113,7 @@ int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv,
const struct tcs_request *msg);
int rpmh_rsc_invalidate(struct rsc_drv *drv);
bool rpmh_rsc_ctrlr_is_idle(struct rsc_drv *drv);
+int rpmh_rsc_write_pdc_data(struct rsc_drv *drv, const struct tcs_request *msg);
void rpmh_tx_done(const struct tcs_request *msg, int r);
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index 8eff7cf..13b1dbc 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -60,6 +60,11 @@
#define CMD_STATUS_ISSUED BIT(8)
#define CMD_STATUS_COMPL BIT(16)
+/* PDC wakeup */
+#define RSC_PDC_DATA_SIZE 2
+#define RSC_PDC_DRV_DATA 0x38
+#define RSC_PDC_DATA_OFFSET 0x08
+
static u32 read_tcs_reg(struct rsc_drv *drv, int reg, int tcs_id, int cmd_id)
{
return readl_relaxed(drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id +
@@ -570,6 +575,26 @@ int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, const struct tcs_request *msg)
return tcs_ctrl_write(drv, msg);
}
+int rpmh_rsc_write_pdc_data(struct rsc_drv *drv, const struct tcs_request *msg)
+{
+ int i;
+ void __iomem *addr = drv->base + RSC_PDC_DRV_DATA;
+
+ if (!msg || !msg->cmds || msg->num_cmds != RSC_PDC_DATA_SIZE)
+ return -EINVAL;
+
+ for (i = 0; i < msg->num_cmds; i++) {
+ /* Only data is write capable */
+ writel_relaxed(msg->cmds[i].data, addr);
+ trace_rpmh_send_msg(drv, RSC_PDC_DRV_DATA, i, 0,
+ &msg->cmds[i]);
+ addr += RSC_PDC_DATA_OFFSET;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(rpmh_rsc_write_pdc_data);
+
static int rpmh_probe_tcs_config(struct platform_device *pdev,
struct rsc_drv *drv)
{
@@ -582,21 +607,20 @@ static int rpmh_probe_tcs_config(struct platform_device *pdev,
int i, ret, n, st = 0;
struct tcs_group *tcs;
struct resource *res;
- void __iomem *base;
char drv_id[10] = {0};
snprintf(drv_id, ARRAY_SIZE(drv_id), "drv-%d", drv->id);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, drv_id);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
+ drv->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(drv->base))
+ return PTR_ERR(drv->base);
ret = of_property_read_u32(dn, "qcom,tcs-offset", &offset);
if (ret)
return ret;
- drv->tcs_base = base + offset;
+ drv->tcs_base = drv->base + offset;
- config = readl_relaxed(base + DRV_PRNT_CHLD_CONFIG);
+ config = readl_relaxed(drv->base + DRV_PRNT_CHLD_CONFIG);
max_tcs = config;
max_tcs &= DRV_NUM_TCS_MASK << (DRV_NUM_TCS_SHIFT * drv->id);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-07-19 9:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-19 9:19 [PATCH 0/6] drivers/qcom: add additional functionality to RPMH Raju P L S S S N
2018-07-19 9:19 ` [PATCH 1/6] drivers: qcom: rpmh-rsc: return if the controller is idle Raju P L S S S N
2018-07-19 9:19 ` [PATCH 2/6] drivers: qcom: rpmh: export controller idle status Raju P L S S S N
2018-07-19 9:19 ` [PATCH 3/6] drivers: qcom: rpmh: disallow active requests in solver mode Raju P L S S S N
2018-07-19 9:19 ` [PATCH 4/6] drivers: qcom: rpmh-rsc: clear active mode configuration for waketcs Raju P L S S S N
2018-07-19 9:19 ` Raju P L S S S N [this message]
2018-07-19 9:19 ` [PATCH 6/6] drivers: qcom: rpmh: write PDC data Raju P L S S S N
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1531991975-23665-6-git-send-email-rplsssn@codeaurora.org \
--to=rplsssn@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=ilina@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mka@chromium.org \
--cc=rnayak@codeaurora.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).