linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v5] Add display clock controller driver for SDM845
@ 2018-07-23 10:54 Taniya Das
  2018-07-23 10:54 ` [PATCH v5] clk: qcom: " Taniya Das
  0 siblings, 1 reply; 5+ messages in thread
From: Taniya Das @ 2018-07-23 10:54 UTC (permalink / raw)
  To: Stephen Boyd, Michael Turquette
  Cc: Andy Gross, David Brown, Rajendra Nayak, Amit Nischal,
	linux-arm-msm, linux-soc, linux-clk, linux-kernel, Taniya Das

 [v5]
  * Initialize pll config before assigining l/alpha values for
    pll configure.
  * Add module description.

 [v4]
  * Add comments for the RCGs/CBCRs using the CLK_GET_RATE_NOCACHE flag.

 [v3]
  * Move frequency table macro to common file,
    add the patch along to maintain dependency.

 [v2]
  * Removed unused header file includes.
  * Moved the frequency table macro to a common file [1].
  * Move to pll config to probe.
  * Update SoC name in device tree binding and
    also update the Kconfig.

Add support for the display clock controller found on SDM845
based devices. This would allow display drivers to probe and
control their clocks.

Taniya Das (1):
  clk: qcom: Add display clock controller driver for SDM845

 drivers/clk/qcom/Kconfig         |  10 +
 drivers/clk/qcom/Makefile        |   1 +
 drivers/clk/qcom/dispcc-sdm845.c | 687 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 698 insertions(+)
 create mode 100644 drivers/clk/qcom/dispcc-sdm845.c

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v5] clk: qcom: Add display clock controller driver for SDM845
  2018-07-23 10:54 [PATCH v5] Add display clock controller driver for SDM845 Taniya Das
@ 2018-07-23 10:54 ` Taniya Das
  2018-07-26 22:05   ` Stephen Boyd
  2018-08-01 15:09   ` Stephen Boyd
  0 siblings, 2 replies; 5+ messages in thread
From: Taniya Das @ 2018-07-23 10:54 UTC (permalink / raw)
  To: Stephen Boyd, Michael Turquette
  Cc: Andy Gross, David Brown, Rajendra Nayak, Amit Nischal,
	linux-arm-msm, linux-soc, linux-clk, linux-kernel, Taniya Das

Add support for the display clock controller found on SDM845
based devices. This would allow display drivers to probe and
control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/Kconfig         |  10 +
 drivers/clk/qcom/Makefile        |   1 +
 drivers/clk/qcom/dispcc-sdm845.c | 687 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 698 insertions(+)
 create mode 100644 drivers/clk/qcom/dispcc-sdm845.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 2b69cf2..0647686 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -254,6 +254,16 @@ config SDM_VIDEOCC_845
 	  Say Y if you want to support video devices and functionality such as
 	  video encode and decode.

+config SDM_DISPCC_845
+	tristate "SDM845 Display Clock Controller"
+	select SDM_GCC_845
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the display clock controller on Qualcomm Technologies, Inc
+	  SDM845 devices.
+	  Say Y if you want to support display devices and functionality such as
+	  splash screen.
+
 config SPMI_PMIC_CLKDIV
 	tristate "SPMI PMIC clkdiv Support"
 	depends on (COMMON_CLK_QCOM && SPMI) || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 599ab91..21a4503 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o
 obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
 obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
 obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
+obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
 obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
 obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
diff --git a/drivers/clk/qcom/dispcc-sdm845.c b/drivers/clk/qcom/dispcc-sdm845.c
new file mode 100644
index 0000000..31850b6
--- /dev/null
+++ b/drivers/clk/qcom/dispcc-sdm845.c
@@ -0,0 +1,687 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+	P_BI_TCXO,
+	P_CORE_BI_PLL_TEST_SE,
+	P_DISP_CC_PLL0_OUT_MAIN,
+	P_DSI0_PHY_PLL_OUT_BYTECLK,
+	P_DSI0_PHY_PLL_OUT_DSICLK,
+	P_DSI1_PHY_PLL_OUT_BYTECLK,
+	P_DSI1_PHY_PLL_OUT_DSICLK,
+	P_GPLL0_OUT_MAIN,
+	P_GPLL0_OUT_MAIN_DIV,
+};
+
+static const struct parent_map disp_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_DSI0_PHY_PLL_OUT_BYTECLK, 1 },
+	{ P_DSI1_PHY_PLL_OUT_BYTECLK, 2 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const disp_cc_parent_names_0[] = {
+	"bi_tcxo",
+	"dsi0_phy_pll_out_byteclk",
+	"dsi1_phy_pll_out_byteclk",
+	"core_bi_pll_test_se",
+};
+
+static const struct parent_map disp_cc_parent_map_2[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const disp_cc_parent_names_2[] = {
+	"bi_tcxo",
+	"core_bi_pll_test_se",
+};
+
+static const struct parent_map disp_cc_parent_map_3[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_DISP_CC_PLL0_OUT_MAIN, 1 },
+	{ P_GPLL0_OUT_MAIN, 4 },
+	{ P_GPLL0_OUT_MAIN_DIV, 5 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const disp_cc_parent_names_3[] = {
+	"bi_tcxo",
+	"disp_cc_pll0",
+	"gcc_disp_gpll0_clk_src",
+	"gcc_disp_gpll0_div_clk_src",
+	"core_bi_pll_test_se",
+};
+
+static const struct parent_map disp_cc_parent_map_4[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_DSI0_PHY_PLL_OUT_DSICLK, 1 },
+	{ P_DSI1_PHY_PLL_OUT_DSICLK, 2 },
+	{ P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const char * const disp_cc_parent_names_4[] = {
+	"bi_tcxo",
+	"dsi0_phy_pll_out_dsiclk",
+	"dsi1_phy_pll_out_dsiclk",
+	"core_bi_pll_test_se",
+};
+
+static struct clk_alpha_pll disp_cc_pll0 = {
+	.offset = 0x0,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_pll0",
+			.parent_names = (const char *[]){ "bi_tcxo" },
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fabia_ops,
+		},
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_rcg2 disp_cc_mdss_byte0_clk_src = {
+	.cmd_rcgr = 0x20d0,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_0,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_byte0_clk_src",
+		.parent_names = disp_cc_parent_names_0,
+		.num_parents = 4,
+		.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+		.ops = &clk_byte2_ops,
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_rcg2 disp_cc_mdss_byte1_clk_src = {
+	.cmd_rcgr = 0x20ec,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_0,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_byte1_clk_src",
+		.parent_names = disp_cc_parent_names_0,
+		.num_parents = 4,
+		.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+		.ops = &clk_byte2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_esc0_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_esc0_clk_src = {
+	.cmd_rcgr = 0x2108,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_0,
+	.freq_tbl = ftbl_disp_cc_mdss_esc0_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_esc0_clk_src",
+		.parent_names = disp_cc_parent_names_0,
+		.num_parents = 4,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 disp_cc_mdss_esc1_clk_src = {
+	.cmd_rcgr = 0x2120,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_0,
+	.freq_tbl = ftbl_disp_cc_mdss_esc0_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_esc1_clk_src",
+		.parent_names = disp_cc_parent_names_0,
+		.num_parents = 4,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_mdp_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(85714286, P_GPLL0_OUT_MAIN, 7, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+	F(171428571, P_GPLL0_OUT_MAIN, 3.5, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+	F(344000000, P_DISP_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
+	F(430000000, P_DISP_CC_PLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_mdp_clk_src = {
+	.cmd_rcgr = 0x2088,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_3,
+	.freq_tbl = ftbl_disp_cc_mdss_mdp_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_mdp_clk_src",
+		.parent_names = disp_cc_parent_names_3,
+		.num_parents = 5,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_rcg2 disp_cc_mdss_pclk0_clk_src = {
+	.cmd_rcgr = 0x2058,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_4,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_pclk0_clk_src",
+		.parent_names = disp_cc_parent_names_4,
+		.num_parents = 4,
+		.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+		.ops = &clk_pixel_ops,
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_rcg2 disp_cc_mdss_pclk1_clk_src = {
+	.cmd_rcgr = 0x2070,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_4,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_pclk1_clk_src",
+		.parent_names = disp_cc_parent_names_4,
+		.num_parents = 4,
+		.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+		.ops = &clk_pixel_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_rot_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(171428571, P_GPLL0_OUT_MAIN, 3.5, 0, 0),
+	F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+	F(344000000, P_DISP_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
+	F(430000000, P_DISP_CC_PLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_rot_clk_src = {
+	.cmd_rcgr = 0x20a0,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_3,
+	.freq_tbl = ftbl_disp_cc_mdss_rot_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_rot_clk_src",
+		.parent_names = disp_cc_parent_names_3,
+		.num_parents = 5,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static struct clk_rcg2 disp_cc_mdss_vsync_clk_src = {
+	.cmd_rcgr = 0x20b8,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_2,
+	.freq_tbl = ftbl_disp_cc_mdss_esc0_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_vsync_clk_src",
+		.parent_names = disp_cc_parent_names_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_branch disp_cc_mdss_ahb_clk = {
+	.halt_reg = 0x4004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_axi_clk = {
+	.halt_reg = 0x4008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_branch disp_cc_mdss_byte0_clk = {
+	.halt_reg = 0x2028,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2028,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_byte0_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_byte0_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_regmap_div disp_cc_mdss_byte0_div_clk_src = {
+	.reg = 0x20e8,
+	.shift = 0,
+	.width = 2,
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_byte0_div_clk_src",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_byte0_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_GET_RATE_NOCACHE,
+			.ops = &clk_regmap_div_ops,
+		},
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_branch disp_cc_mdss_byte0_intf_clk = {
+	.halt_reg = 0x202c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x202c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_byte0_intf_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_byte0_div_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_branch disp_cc_mdss_byte1_clk = {
+	.halt_reg = 0x2030,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2030,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_byte1_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_byte1_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_regmap_div disp_cc_mdss_byte1_div_clk_src = {
+	.reg = 0x2104,
+	.shift = 0,
+	.width = 2,
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_byte1_div_clk_src",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_byte1_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_GET_RATE_NOCACHE,
+			.ops = &clk_regmap_div_ops,
+		},
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_branch disp_cc_mdss_byte1_intf_clk = {
+	.halt_reg = 0x2034,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2034,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_byte1_intf_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_byte1_div_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_esc0_clk = {
+	.halt_reg = 0x2038,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2038,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_esc0_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_esc0_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_esc1_clk = {
+	.halt_reg = 0x203c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x203c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_esc1_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_esc1_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_mdp_clk = {
+	.halt_reg = 0x200c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x200c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_mdp_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_mdp_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_mdp_lut_clk = {
+	.halt_reg = 0x201c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x201c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_mdp_lut_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_mdp_clk_src",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_branch disp_cc_mdss_pclk0_clk = {
+	.halt_reg = 0x2004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_pclk0_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_pclk0_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+/* Return the HW recalc rate for idle use case */
+static struct clk_branch disp_cc_mdss_pclk1_clk = {
+	.halt_reg = 0x2008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_pclk1_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_pclk1_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_rot_clk = {
+	.halt_reg = 0x2014,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2014,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_rot_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_rot_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_rscc_ahb_clk = {
+	.halt_reg = 0x5004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x5004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_rscc_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_rscc_vsync_clk = {
+	.halt_reg = 0x5008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x5008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_rscc_vsync_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_vsync_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_vsync_clk = {
+	.halt_reg = 0x2024,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2024,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_vsync_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_vsync_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc mdss_gdsc = {
+	.gdscr = 0x3000,
+	.pd = {
+		.name = "mdss_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = HW_CTRL | POLL_CFG_GDSCR,
+};
+
+static struct clk_regmap *disp_cc_sdm845_clocks[] = {
+	[DISP_CC_MDSS_AHB_CLK] = &disp_cc_mdss_ahb_clk.clkr,
+	[DISP_CC_MDSS_AXI_CLK] = &disp_cc_mdss_axi_clk.clkr,
+	[DISP_CC_MDSS_BYTE0_CLK] = &disp_cc_mdss_byte0_clk.clkr,
+	[DISP_CC_MDSS_BYTE0_CLK_SRC] = &disp_cc_mdss_byte0_clk_src.clkr,
+	[DISP_CC_MDSS_BYTE0_INTF_CLK] = &disp_cc_mdss_byte0_intf_clk.clkr,
+	[DISP_CC_MDSS_BYTE0_DIV_CLK_SRC] =
+					&disp_cc_mdss_byte0_div_clk_src.clkr,
+	[DISP_CC_MDSS_BYTE1_CLK] = &disp_cc_mdss_byte1_clk.clkr,
+	[DISP_CC_MDSS_BYTE1_CLK_SRC] = &disp_cc_mdss_byte1_clk_src.clkr,
+	[DISP_CC_MDSS_BYTE1_INTF_CLK] = &disp_cc_mdss_byte1_intf_clk.clkr,
+	[DISP_CC_MDSS_BYTE1_DIV_CLK_SRC] =
+					&disp_cc_mdss_byte1_div_clk_src.clkr,
+	[DISP_CC_MDSS_ESC0_CLK] = &disp_cc_mdss_esc0_clk.clkr,
+	[DISP_CC_MDSS_ESC0_CLK_SRC] = &disp_cc_mdss_esc0_clk_src.clkr,
+	[DISP_CC_MDSS_ESC1_CLK] = &disp_cc_mdss_esc1_clk.clkr,
+	[DISP_CC_MDSS_ESC1_CLK_SRC] = &disp_cc_mdss_esc1_clk_src.clkr,
+	[DISP_CC_MDSS_MDP_CLK] = &disp_cc_mdss_mdp_clk.clkr,
+	[DISP_CC_MDSS_MDP_CLK_SRC] = &disp_cc_mdss_mdp_clk_src.clkr,
+	[DISP_CC_MDSS_MDP_LUT_CLK] = &disp_cc_mdss_mdp_lut_clk.clkr,
+	[DISP_CC_MDSS_PCLK0_CLK] = &disp_cc_mdss_pclk0_clk.clkr,
+	[DISP_CC_MDSS_PCLK0_CLK_SRC] = &disp_cc_mdss_pclk0_clk_src.clkr,
+	[DISP_CC_MDSS_PCLK1_CLK] = &disp_cc_mdss_pclk1_clk.clkr,
+	[DISP_CC_MDSS_PCLK1_CLK_SRC] = &disp_cc_mdss_pclk1_clk_src.clkr,
+	[DISP_CC_MDSS_ROT_CLK] = &disp_cc_mdss_rot_clk.clkr,
+	[DISP_CC_MDSS_ROT_CLK_SRC] = &disp_cc_mdss_rot_clk_src.clkr,
+	[DISP_CC_MDSS_RSCC_AHB_CLK] = &disp_cc_mdss_rscc_ahb_clk.clkr,
+	[DISP_CC_MDSS_RSCC_VSYNC_CLK] = &disp_cc_mdss_rscc_vsync_clk.clkr,
+	[DISP_CC_MDSS_VSYNC_CLK] = &disp_cc_mdss_vsync_clk.clkr,
+	[DISP_CC_MDSS_VSYNC_CLK_SRC] = &disp_cc_mdss_vsync_clk_src.clkr,
+	[DISP_CC_PLL0] = &disp_cc_pll0.clkr,
+};
+
+static const struct qcom_reset_map disp_cc_sdm845_resets[] = {
+	[DISP_CC_MDSS_RSCC_BCR] = { 0x5000 },
+};
+
+static struct gdsc *disp_cc_sdm845_gdscs[] = {
+	[MDSS_GDSC] = &mdss_gdsc,
+};
+
+static const struct regmap_config disp_cc_sdm845_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= 0x10000,
+	.fast_io	= true,
+};
+
+static const struct qcom_cc_desc disp_cc_sdm845_desc = {
+	.config = &disp_cc_sdm845_regmap_config,
+	.clks = disp_cc_sdm845_clocks,
+	.num_clks = ARRAY_SIZE(disp_cc_sdm845_clocks),
+	.resets = disp_cc_sdm845_resets,
+	.num_resets = ARRAY_SIZE(disp_cc_sdm845_resets),
+	.gdscs = disp_cc_sdm845_gdscs,
+	.num_gdscs = ARRAY_SIZE(disp_cc_sdm845_gdscs),
+};
+
+static const struct of_device_id disp_cc_sdm845_match_table[] = {
+	{ .compatible = "qcom,sdm845-dispcc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, disp_cc_sdm845_match_table);
+
+static int disp_cc_sdm845_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	struct alpha_pll_config disp_cc_pll0_config = {};
+
+	regmap = qcom_cc_map(pdev, &disp_cc_sdm845_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	disp_cc_pll0_config.l = 0x2c;
+	disp_cc_pll0_config.alpha = 0xcaaa;
+
+	clk_fabia_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
+
+	/* Enable hardware clock gating for DSI and MDP clocks */
+	regmap_update_bits(regmap, 0x8000, 0x7f0, 0x7f0);
+
+	return qcom_cc_really_probe(pdev, &disp_cc_sdm845_desc, regmap);
+}
+
+static struct platform_driver disp_cc_sdm845_driver = {
+	.probe		= disp_cc_sdm845_probe,
+	.driver		= {
+		.name	= "disp_cc-sdm845",
+		.of_match_table = disp_cc_sdm845_match_table,
+	},
+};
+
+static int __init disp_cc_sdm845_init(void)
+{
+	return platform_driver_register(&disp_cc_sdm845_driver);
+}
+subsys_initcall(disp_cc_sdm845_init);
+
+static void __exit disp_cc_sdm845_exit(void)
+{
+	platform_driver_unregister(&disp_cc_sdm845_driver);
+}
+module_exit(disp_cc_sdm845_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QTI DISPCC SDM845 Driver");
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v5] clk: qcom: Add display clock controller driver for SDM845
  2018-07-23 10:54 ` [PATCH v5] clk: qcom: " Taniya Das
@ 2018-07-26 22:05   ` Stephen Boyd
  2018-07-27  7:45     ` Taniya Das
  2018-08-01 15:09   ` Stephen Boyd
  1 sibling, 1 reply; 5+ messages in thread
From: Stephen Boyd @ 2018-07-26 22:05 UTC (permalink / raw)
  To: Michael Turquette
  Cc: Andy Gross, David Brown, Rajendra Nayak, Amit Nischal,
	linux-arm-msm, linux-soc, linux-clk, linux-kernel, Taniya Das

Quoting Taniya Das (2018-07-23 03:54:35)
> Add support for the display clock controller found on SDM845
> based devices. This would allow display drivers to probe and
> control their clocks.
> 
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---

This is fine to merge as long as you're ok with removing the no rate
cache flag. I can do that myself so you don't have to resend.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v5] clk: qcom: Add display clock controller driver for SDM845
  2018-07-26 22:05   ` Stephen Boyd
@ 2018-07-27  7:45     ` Taniya Das
  0 siblings, 0 replies; 5+ messages in thread
From: Taniya Das @ 2018-07-27  7:45 UTC (permalink / raw)
  To: Stephen Boyd, Michael Turquette
  Cc: Andy Gross, David Brown, Rajendra Nayak, Amit Nischal,
	linux-arm-msm, linux-soc, linux-clk, linux-kernel



On 7/27/2018 3:35 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2018-07-23 03:54:35)
>> Add support for the display clock controller found on SDM845
>> based devices. This would allow display drivers to probe and
>> control their clocks.
>>
>> Signed-off-by: Taniya Das <tdas@codeaurora.org>
>> ---
> 
> This is fine to merge as long as you're ok with removing the no rate
> cache flag. I can do that myself so you don't have to resend.
> 

Thanks, please go ahead and remove the flags, in case the display 
drivers would require the flags for any proper use case then we could 
think on re-introducing them.

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v5] clk: qcom: Add display clock controller driver for SDM845
  2018-07-23 10:54 ` [PATCH v5] clk: qcom: " Taniya Das
  2018-07-26 22:05   ` Stephen Boyd
@ 2018-08-01 15:09   ` Stephen Boyd
  1 sibling, 0 replies; 5+ messages in thread
From: Stephen Boyd @ 2018-08-01 15:09 UTC (permalink / raw)
  To: Michael Turquette
  Cc: Andy Gross, David Brown, Rajendra Nayak, Amit Nischal,
	linux-arm-msm, linux-soc, linux-clk, linux-kernel, Taniya Das

Quoting Taniya Das (2018-07-23 03:54:35)
> Add support for the display clock controller found on SDM845
> based devices. This would allow display drivers to probe and
> control their clocks.
> 
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---

Applied to clk-next with removal of the rate cache flag.

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2018-08-01 15:09 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-23 10:54 [PATCH v5] Add display clock controller driver for SDM845 Taniya Das
2018-07-23 10:54 ` [PATCH v5] clk: qcom: " Taniya Das
2018-07-26 22:05   ` Stephen Boyd
2018-07-27  7:45     ` Taniya Das
2018-08-01 15:09   ` Stephen Boyd

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).