linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Raju P L S S S N <rplsssn@codeaurora.org>
To: andy.gross@linaro.org, david.brown@linaro.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
Cc: rnayak@codeaurora.org, bjorn.andersson@linaro.org,
	linux-kernel@vger.kernel.org, sboyd@kernel.org,
	evgreen@chromium.org, dianders@chromium.org, mka@chromium.org,
	ilina@codeaurora.org, "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
Subject: [PATCH v2 3/6] drivers: qcom: rpmh: disallow active requests in solver mode
Date: Fri, 27 Jul 2018 15:34:46 +0530	[thread overview]
Message-ID: <1532685889-31345-4-git-send-email-rplsssn@codeaurora.org> (raw)
In-Reply-To: <1532685889-31345-1-git-send-email-rplsssn@codeaurora.org>

From: Lina Iyer <ilina@codeaurora.org>

Controllers may be in 'solver' state, where they could be in autonomous
mode executing low power modes for their hardware and as such are not
available for sending active votes. Device driver may notify RPMH API
that the controller is in solver mode and when in such mode, disallow
requests from platform drivers for state change using the RSC.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
---
 drivers/soc/qcom/rpmh-internal.h |  2 ++
 drivers/soc/qcom/rpmh.c          | 59 ++++++++++++++++++++++++++++++++++++++++
 include/soc/qcom/rpmh.h          |  5 ++++
 3 files changed, 66 insertions(+)

diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
index 4ff43bf..6cd2f78 100644
--- a/drivers/soc/qcom/rpmh-internal.h
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -72,12 +72,14 @@ struct rpmh_request {
  * @cache_lock: synchronize access to the cache data
  * @dirty: was the cache updated since flush
  * @batch_cache: Cache sleep and wake requests sent as batch
+ * @in_solver_mode: Controller is busy in solver mode
  */
 struct rpmh_ctrlr {
 	struct list_head cache;
 	spinlock_t cache_lock;
 	bool dirty;
 	struct list_head batch_cache;
+	bool in_solver_mode;
 };
 
 /**
diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
index 2382276..0d276fd 100644
--- a/drivers/soc/qcom/rpmh.c
+++ b/drivers/soc/qcom/rpmh.c
@@ -5,6 +5,7 @@
 
 #include <linux/atomic.h>
 #include <linux/bug.h>
+#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
@@ -75,6 +76,50 @@ static struct rpmh_ctrlr *get_rpmh_ctrlr(const struct device *dev)
 	return &drv->client;
 }
 
+static int check_ctrlr_state(struct rpmh_ctrlr *ctrlr, enum rpmh_state state)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	/* Do not allow setting active votes when in solver mode */
+	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+	if (ctrlr->in_solver_mode && state == RPMH_ACTIVE_ONLY_STATE)
+		ret = -EBUSY;
+	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+
+	return ret;
+}
+
+/**
+ * rpmh_mode_solver_set: Indicate that the RSC controller hardware has
+ * been configured to be in solver mode
+ *
+ * @dev: the device making the request
+ * @enable: Boolean value indicating if the controller is in solver mode.
+ *
+ * When solver mode is enabled, passthru API will not be able to send wake
+ * votes, just awake and active votes.
+ */
+int rpmh_mode_solver_set(const struct device *dev, bool enable)
+{
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+	unsigned long flags;
+
+	for (;;) {
+		spin_lock_irqsave(&ctrlr->cache_lock, flags);
+		if (rpmh_rsc_ctrlr_is_idle(ctrlr_to_drv(ctrlr))) {
+			ctrlr->in_solver_mode = enable;
+			spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+			break;
+		}
+		spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+		udelay(10);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(rpmh_mode_solver_set);
+
 void rpmh_tx_done(const struct tcs_request *msg, int r)
 {
 	struct rpmh_request *rpm_msg = container_of(msg, struct rpmh_request,
@@ -231,8 +276,13 @@ int rpmh_write_async(const struct device *dev, enum rpmh_state state,
 		     const struct tcs_cmd *cmd, u32 n)
 {
 	struct rpmh_request *rpm_msg;
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
 	int ret;
 
+	ret = check_ctrlr_state(ctrlr, state);
+	if (ret)
+		return ret;
+
 	rpm_msg = kzalloc(sizeof(*rpm_msg), GFP_ATOMIC);
 	if (!rpm_msg)
 		return -ENOMEM;
@@ -263,11 +313,16 @@ int rpmh_write(const struct device *dev, enum rpmh_state state,
 {
 	DECLARE_COMPLETION_ONSTACK(compl);
 	DEFINE_RPMH_MSG_ONSTACK(dev, state, &compl, rpm_msg);
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
 	int ret;
 
 	if (!cmd || !n || n > MAX_RPMH_PAYLOAD)
 		return -EINVAL;
 
+	ret = check_ctrlr_state(ctrlr, state);
+	if (ret)
+		return ret;
+
 	memcpy(rpm_msg.cmd, cmd, n * sizeof(*cmd));
 	rpm_msg.msg.num_cmds = n;
 
@@ -357,6 +412,10 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
 	if (!cmd || !n)
 		return -EINVAL;
 
+	ret = check_ctrlr_state(ctrlr, state);
+	if (ret)
+		return ret;
+
 	while (n[count] > 0)
 		count++;
 	if (!count)
diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h
index d445322..018788d 100644
--- a/include/soc/qcom/rpmh.h
+++ b/include/soc/qcom/rpmh.h
@@ -26,6 +26,8 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
 
 int rpmh_ctrlr_idle(const struct device *dev);
 
+int rpmh_mode_solver_set(const struct device *dev, bool enable);
+
 #else
 
 static inline int rpmh_write(const struct device *dev, enum rpmh_state state,
@@ -51,6 +53,9 @@ static inline int rpmh_invalidate(const struct device *dev)
 static inline int rpmh_ctrlr_idle(const struct device *dev)
 { return -ENODEV; }
 
+static inline int rpmh_mode_solver_set(const struct device *dev, bool enable)
+{ return -ENODEV; }
+
 #endif /* CONFIG_QCOM_RPMH */
 
 #endif /* __SOC_QCOM_RPMH_H__ */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project

  parent reply	other threads:[~2018-07-27 10:04 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-27 10:04 [PATCH v2 0/6] drivers/qcom: add additional functionality to RPMH Raju P L S S S N
2018-07-27 10:04 ` [PATCH v2 1/6] drivers: qcom: rpmh-rsc: return if the controller is idle Raju P L S S S N
2018-09-11 22:39   ` Matthias Kaehlcke
2018-09-12  2:20     ` Lina Iyer
2018-07-27 10:04 ` [PATCH v2 2/6] drivers: qcom: rpmh: export controller idle status Raju P L S S S N
2018-07-27 10:04 ` Raju P L S S S N [this message]
2018-09-11 23:02   ` [PATCH v2 3/6] drivers: qcom: rpmh: disallow active requests in solver mode Matthias Kaehlcke
2018-09-12  2:22     ` Lina Iyer
2018-07-27 10:04 ` [PATCH v2 4/6] drivers: qcom: rpmh-rsc: clear active mode configuration for waketcs Raju P L S S S N
2018-09-12 21:51   ` Matthias Kaehlcke
2018-07-27 10:04 ` [PATCH v2 5/6] drivers: qcom: rpmh-rsc: write PDC data Raju P L S S S N
2018-09-12 22:28   ` Matthias Kaehlcke
2018-09-12 22:33     ` Lina Iyer
2018-09-12 22:37       ` Matthias Kaehlcke
2018-07-27 10:04 ` [PATCH v2 6/6] drivers: qcom: rpmh: " Raju P L S S S N
2018-09-12 22:55   ` Matthias Kaehlcke
2018-09-05 20:05 ` [PATCH v2 0/6] drivers/qcom: add additional functionality to RPMH Lina Iyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1532685889-31345-4-git-send-email-rplsssn@codeaurora.org \
    --to=rplsssn@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=ilina@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).