From: Jeykumar Sankaran <jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
Jeykumar Sankaran
<jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: [PATCH v3 07/13] drm/msm/dpu: avoid querying for hw intf before assignment
Date: Tue, 7 Aug 2018 20:12:34 -0700 [thread overview]
Message-ID: <1533697956-29686-8-git-send-email-jsanka@codeaurora.org> (raw)
In-Reply-To: <1533697956-29686-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
hw intf blocks are needed only during encoder enable to program
timing engines(for video panels). encoder->enable is triggered
only after atomic_modeset at which point we assign the
resources for the display pipeline. This patch defers the
hw_intf look-up until encoder enable.
changes in v2:
- none
changes in v3:
- none
Change-Id: Ib0a2253431468151355e50cbad7b91e2b77b6e54
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
---
.../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 53 +++++++---------------
1 file changed, 16 insertions(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index c0221cc..a0b3744 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -462,7 +462,7 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
{
struct msm_drm_private *priv;
struct dpu_encoder_phys_vid *vid_enc;
- struct dpu_hw_intf *intf;
+ struct dpu_rm_hw_iter iter;
struct dpu_hw_ctl *ctl;
u32 flush_mask = 0;
@@ -474,11 +474,20 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
priv = phys_enc->parent->dev->dev_private;
vid_enc = to_dpu_encoder_phys_vid(phys_enc);
- intf = vid_enc->hw_intf;
ctl = phys_enc->hw_ctl;
- if (!vid_enc->hw_intf || !phys_enc->hw_ctl) {
- DPU_ERROR("invalid hw_intf %d hw_ctl %d\n",
- vid_enc->hw_intf != 0, phys_enc->hw_ctl != 0);
+
+ dpu_rm_init_hw_iter(&iter, phys_enc->parent->base.id, DPU_HW_BLK_INTF);
+ while (dpu_rm_get_hw(&phys_enc->dpu_kms->rm, &iter)) {
+ struct dpu_hw_intf *hw_intf = (struct dpu_hw_intf *)iter.hw;
+
+ if (hw_intf->idx == phys_enc->intf_idx) {
+ vid_enc->hw_intf = hw_intf;
+ break;
+ }
+ }
+
+ if (!vid_enc->hw_intf) {
+ DPU_ERROR("hw_intf not assigned\n");
return;
}
@@ -500,7 +509,7 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
!dpu_encoder_phys_vid_is_master(phys_enc))
goto skip_flush;
- ctl->ops.get_bitmask_intf(ctl, &flush_mask, intf->idx);
+ ctl->ops.get_bitmask_intf(ctl, &flush_mask, vid_enc->hw_intf->idx);
ctl->ops.update_pending_flush(ctl, flush_mask);
skip_flush:
@@ -531,22 +540,13 @@ static void dpu_encoder_phys_vid_get_hw_resources(
struct dpu_encoder_hw_resources *hw_res,
struct drm_connector_state *conn_state)
{
- struct dpu_encoder_phys_vid *vid_enc;
-
if (!phys_enc || !hw_res) {
DPU_ERROR("invalid arg(s), enc %d hw_res %d conn_state %d\n",
phys_enc != 0, hw_res != 0, conn_state != 0);
return;
}
- vid_enc = to_dpu_encoder_phys_vid(phys_enc);
- if (!vid_enc->hw_intf) {
- DPU_ERROR("invalid arg(s), hw_intf\n");
- return;
- }
-
- DPU_DEBUG_VIDENC(vid_enc, "\n");
- hw_res->intfs[vid_enc->hw_intf->idx - INTF_0] = INTF_MODE_VIDEO;
+ hw_res->intfs[phys_enc->intf_idx - INTF_0] = INTF_MODE_VIDEO;
}
static int _dpu_encoder_phys_vid_wait_for_vblank(
@@ -809,7 +809,6 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
{
struct dpu_encoder_phys *phys_enc = NULL;
struct dpu_encoder_phys_vid *vid_enc = NULL;
- struct dpu_rm_hw_iter iter;
struct dpu_encoder_irq *irq;
int i, ret = 0;
@@ -829,26 +828,6 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
phys_enc->hw_mdptop = p->dpu_kms->hw_mdp;
phys_enc->intf_idx = p->intf_idx;
- /**
- * hw_intf resource permanently assigned to this encoder
- * Other resources allocated at atomic commit time by use case
- */
- dpu_rm_init_hw_iter(&iter, 0, DPU_HW_BLK_INTF);
- while (dpu_rm_get_hw(&p->dpu_kms->rm, &iter)) {
- struct dpu_hw_intf *hw_intf = (struct dpu_hw_intf *)iter.hw;
-
- if (hw_intf->idx == p->intf_idx) {
- vid_enc->hw_intf = hw_intf;
- break;
- }
- }
-
- if (!vid_enc->hw_intf) {
- ret = -EINVAL;
- DPU_ERROR("failed to get hw_intf\n");
- goto fail;
- }
-
DPU_DEBUG_VIDENC(vid_enc, "\n");
dpu_encoder_phys_vid_init_ops(&phys_enc->ops);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
next prev parent reply other threads:[~2018-08-08 3:12 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-08 3:12 [PATCH v3 00/13] Atomic resource management Jeykumar Sankaran
[not found] ` <1533697956-29686-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-08 3:12 ` [PATCH v3 01/13] drm/msm/dpu: remove scalar config definitions Jeykumar Sankaran
[not found] ` <1533697956-29686-2-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-13 13:50 ` Sean Paul
2018-08-08 3:12 ` [PATCH v3 02/13] drm/msm/dpu: remove resource pool manager Jeykumar Sankaran
[not found] ` <1533697956-29686-3-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:02 ` Sean Paul
2018-08-08 3:12 ` [PATCH v3 03/13] drm/msm/dpu: remove ping pong split topology variables Jeykumar Sankaran
[not found] ` <1533697956-29686-4-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:03 ` Sean Paul
2018-08-08 3:12 ` [PATCH v3 04/13] drm/msm/dpu: program master-slave encoders explicitly Jeykumar Sankaran
[not found] ` <1533697956-29686-5-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:19 ` Sean Paul
2018-08-15 0:11 ` Jeykumar Sankaran
2018-08-08 3:12 ` [PATCH v3 05/13] drm/msm/dpu: use kms stored hw mdp block Jeykumar Sankaran
[not found] ` <1533697956-29686-6-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:19 ` Sean Paul
2018-08-08 3:12 ` [PATCH v3 06/13] drm/msm/dpu: iterate for assigned hw ctl in virtual encoder Jeykumar Sankaran
[not found] ` <1533697956-29686-7-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:24 ` Sean Paul
2018-08-08 3:12 ` Jeykumar Sankaran [this message]
[not found] ` <1533697956-29686-8-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:37 ` [PATCH v3 07/13] drm/msm/dpu: avoid querying for hw intf before assignment Sean Paul
2018-08-08 3:12 ` [PATCH v3 08/13] drm/msm/dpu: move hw resource tracking to crtc state Jeykumar Sankaran
[not found] ` <1533697956-29686-9-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:57 ` Sean Paul
2018-08-08 3:12 ` [PATCH v3 09/13] drm/msm/dpu: rename hw_ctl to lm_ctl Jeykumar Sankaran
[not found] ` <1533697956-29686-10-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:59 ` Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533697956-29686-8-git-send-email-jsanka@codeaurora.org \
--to=jsanka-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).