linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeykumar Sankaran <jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	Jeykumar Sankaran
	<jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: [PATCH 3/3] drm/msm/dpu: use encoder type to identify display type
Date: Tue, 28 Aug 2018 16:02:18 -0700	[thread overview]
Message-ID: <1535497338-30389-4-git-send-email-jsanka@codeaurora.org> (raw)
In-Reply-To: <1535497338-30389-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

With patch [1], DPU is broken since it continues to use
incorrect connector_type to identify the display type. Update
DPU to use the encoder type to get the info.

[1] https://patchwork.kernel.org/patch/10568269/

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 26c80b6..5b0e944 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -525,7 +525,7 @@ void dpu_encoder_helper_split_config(
 	hw_mdptop = phys_enc->hw_mdptop;
 	disp_info = &dpu_enc->disp_info;
 
-	if (disp_info->intf_type != DRM_MODE_CONNECTOR_DSI)
+	if (disp_info->intf_type != DRM_MODE_ENCODER_DSI)
 		return;
 
 	/**
@@ -1873,7 +1873,7 @@ void dpu_encoder_kickoff(struct drm_encoder *drm_enc)
 			phys->ops.handle_post_kickoff(phys);
 	}
 
-	if (dpu_enc->disp_info.intf_type == DRM_MODE_CONNECTOR_DSI &&
+	if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_DSI &&
 			!_dpu_encoder_wakeup_time(drm_enc, &wakeup_time)) {
 		trace_dpu_enc_early_kickoff(DRMID(drm_enc),
 					    ktime_to_ms(wakeup_time));
@@ -2222,7 +2222,7 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 	DPU_DEBUG("\n");
 
 	switch (disp_info->intf_type) {
-	case DRM_MODE_CONNECTOR_DSI:
+	case DRM_MODE_ENCODER_DSI:
 		intf_type = INTF_DSI;
 		break;
 	default:
@@ -2362,7 +2362,7 @@ int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc,
 	timer_setup(&dpu_enc->frame_done_timer,
 			dpu_encoder_frame_done_timeout, 0);
 
-	if (disp_info->intf_type == DRM_MODE_CONNECTOR_DSI)
+	if (disp_info->intf_type == DRM_MODE_ENCODER_DSI)
 		timer_setup(&dpu_enc->vsync_event_timer,
 				dpu_encoder_vsync_event_handler,
 				0);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

  parent reply	other threads:[~2018-08-28 23:02 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-28 23:02 [PATCH 0/3] use encoder type to identify display Jeykumar Sankaran
     [not found] ` <1535497338-30389-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-28 23:02   ` [PATCH 1/3] drm/msm/dpu: remove stale display port programming Jeykumar Sankaran
2018-08-28 23:02   ` [PATCH 2/3] drm/msm/dpu: remove unwanted encoder type mapping Jeykumar Sankaran
2018-08-28 23:02   ` Jeykumar Sankaran [this message]
     [not found]     ` <1535497338-30389-4-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-29 19:57       ` [PATCH 3/3] drm/msm/dpu: use encoder type to identify display type Jordan Crouse
2018-08-30 15:57 ` [PATCH 0/3] use encoder type to identify display Sean Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1535497338-30389-4-git-send-email-jsanka@codeaurora.org \
    --to=jsanka-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).