linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeykumar Sankaran <jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	Jeykumar Sankaran
	<jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: [PATCH v6 12/19] drm/msm/dpu: rename hw_ctl to lm_ctl
Date: Fri,  7 Sep 2018 17:24:20 -0700	[thread overview]
Message-ID: <1536366267-22336-13-git-send-email-jsanka@codeaurora.org> (raw)
In-Reply-To: <1536366267-22336-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

Rename hw_ctl to lm_ctl to mean the ctl associated
with the hw layer mixer block.

sed -i 's/\([*@.>]\)hw_ctl\([^s]\)/\1lm_ctl\2/g' dpu_crtc.c dpu_crtc.h

changes in v4:
	- Specifiy shell command used for renaming (Sean)
changes in v5:
	- none
changes in v6:
	- none

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 26 +++++++++++++-------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h |  4 ++--
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 4ab1355..a8f2dd7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -194,7 +194,7 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
 		return;
 	}
 
-	ctl = mixer->hw_ctl;
+	ctl = mixer->lm_ctl;
 	lm = mixer->hw_lm;
 	stage_cfg = &dpu_crtc->stage_cfg;
 	cstate = to_dpu_crtc_state(crtc->state);
@@ -279,15 +279,15 @@ static void _dpu_crtc_blend_setup(struct drm_crtc *crtc)
 	DPU_DEBUG("%s\n", dpu_crtc->name);
 
 	for (i = 0; i < cstate->num_mixers; i++) {
-		if (!mixer[i].hw_lm || !mixer[i].hw_ctl) {
+		if (!mixer[i].hw_lm || !mixer[i].lm_ctl) {
 			DPU_ERROR("invalid lm or ctl assigned to mixer\n");
 			return;
 		}
 		mixer[i].mixer_op_mode = 0;
 		mixer[i].flush_mask = 0;
-		if (mixer[i].hw_ctl->ops.clear_all_blendstages)
-			mixer[i].hw_ctl->ops.clear_all_blendstages(
-					mixer[i].hw_ctl);
+		if (mixer[i].lm_ctl->ops.clear_all_blendstages)
+			mixer[i].lm_ctl->ops.clear_all_blendstages(
+					mixer[i].lm_ctl);
 	}
 
 	/* initialize stage cfg */
@@ -296,7 +296,7 @@ static void _dpu_crtc_blend_setup(struct drm_crtc *crtc)
 	_dpu_crtc_blend_setup_mixer(crtc, dpu_crtc, mixer);
 
 	for (i = 0; i < cstate->num_mixers; i++) {
-		ctl = mixer[i].hw_ctl;
+		ctl = mixer[i].lm_ctl;
 		lm = mixer[i].hw_lm;
 
 		lm->ops.setup_alpha_out(lm, mixer[i].mixer_op_mode);
@@ -540,14 +540,14 @@ static void _dpu_crtc_setup_mixer_for_encoder(
 		if (!dpu_rm_get_hw(rm, &ctl_iter)) {
 			DPU_DEBUG("no ctl assigned to lm %d, using previous\n",
 					mixer->hw_lm->idx - LM_0);
-			mixer->hw_ctl = last_valid_ctl;
+			mixer->lm_ctl = last_valid_ctl;
 		} else {
-			mixer->hw_ctl = (struct dpu_hw_ctl *)ctl_iter.hw;
-			last_valid_ctl = mixer->hw_ctl;
+			mixer->lm_ctl = (struct dpu_hw_ctl *)ctl_iter.hw;
+			last_valid_ctl = mixer->lm_ctl;
 		}
 
 		/* Shouldn't happen, mixers are always >= ctls */
-		if (!mixer->hw_ctl) {
+		if (!mixer->lm_ctl) {
 			DPU_ERROR("no valid ctls found for lm %d\n",
 					mixer->hw_lm->idx - LM_0);
 			return;
@@ -559,7 +559,7 @@ static void _dpu_crtc_setup_mixer_for_encoder(
 		DPU_DEBUG("setup mixer %d: lm %d\n",
 				i, mixer->hw_lm->idx - LM_0);
 		DPU_DEBUG("setup mixer %d: ctl %d\n",
-				i, mixer->hw_ctl->idx - CTL_0);
+				i, mixer->lm_ctl->idx - CTL_0);
 	}
 }
 
@@ -1532,11 +1532,11 @@ static int _dpu_debugfs_status_show(struct seq_file *s, void *data)
 		m = &cstate->mixers[i];
 		if (!m->hw_lm)
 			seq_printf(s, "\tmixer[%d] has no lm\n", i);
-		else if (!m->hw_ctl)
+		else if (!m->lm_ctl)
 			seq_printf(s, "\tmixer[%d] has no ctl\n", i);
 		else
 			seq_printf(s, "\tmixer:%d ctl:%d width:%d height:%d\n",
-				m->hw_lm->idx - LM_0, m->hw_ctl->idx - CTL_0,
+				m->hw_lm->idx - LM_0, m->lm_ctl->idx - CTL_0,
 				out_width, mode->vdisplay);
 	}
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
index 7aa772f..9b1056c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
@@ -83,14 +83,14 @@ struct dpu_crtc_smmu_state_data {
 /**
  * struct dpu_crtc_mixer: stores the map for each virtual pipeline in the CRTC
  * @hw_lm:	LM HW Driver context
- * @hw_ctl:	CTL Path HW driver context
+ * @lm_ctl:	CTL Path HW driver context
  * @encoder:	Encoder attached to this lm & ctl
  * @mixer_op_mode:	mixer blending operation mode
  * @flush_mask:	mixer flush mask for ctl, mixer and pipe
  */
 struct dpu_crtc_mixer {
 	struct dpu_hw_mixer *hw_lm;
-	struct dpu_hw_ctl *hw_ctl;
+	struct dpu_hw_ctl *lm_ctl;
 	struct drm_encoder *encoder;
 	u32 mixer_op_mode;
 	u32 flush_mask;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

  parent reply	other threads:[~2018-09-08  0:24 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-08  0:24 [PATCH v6 00/19] clean up DPU for RM refactor Jeykumar Sankaran
     [not found] ` <1536366267-22336-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-09-08  0:24   ` [PATCH v6 01/19] drm/msm/dpu: remove debugfs support for misr Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 02/19] drm/msm/dpu: squash power handle event types Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 03/19] drm/msm/dpu: remove scalar config definitions Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 04/19] drm/msm/dpu: remove resource pool manager Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 05/19] drm/msm/dpu: remove ping pong split topology variables Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 06/19] drm/msm/dpu: enable master-slave encoders explicitly Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 07/19] drm/msm/dpu: use kms stored hw mdp block Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 08/19] drm/msm/dpu: iterate for assigned hw ctl in virtual encoder Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 09/19] drm/msm/dpu: avoid querying for hw intf before assignment Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 10/19] drm/msm/dpu: make crtc get_mixer_width helper static Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 11/19] drm/msm/dpu: move hw resource tracking to crtc state Jeykumar Sankaran
2018-09-08  0:24   ` Jeykumar Sankaran [this message]
2018-09-08  0:24   ` [PATCH v6 13/19] drm/msm/dpu: clean up destination scaler residue Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 14/19] drm/msm/dpu: remove cdm block support from resource manager Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 15/19] drm/msm/dpu: remove LOCK/CLEAR support in RM Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 16/19] drm/msm/dpu: remove display H_TILE from encoder Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 17/19] drm/msm/dpu: remove RM dependency on connector state Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 18/19] drm/msm/dpu: relax parameter validation in encoders Jeykumar Sankaran
2018-09-08  0:24   ` [PATCH v6 19/19] drm/msm/dpu: remove RM topology definition Jeykumar Sankaran
2018-09-11 18:20   ` [PATCH v6 00/19] clean up DPU for RM refactor Sean Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1536366267-22336-13-git-send-email-jsanka@codeaurora.org \
    --to=jsanka-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).