linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeykumar Sankaran <jsanka@codeaurora.org>
To: dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
	linux-arm-msm@vger.kernel.org
Cc: abhinavk@codeaurora.org, hoegsberg@google.com, seanpaul@chromium.org
Subject: [PATCH v3] drm/msm: validate display and event threads
Date: Mon,  8 Oct 2018 16:55:45 -0700	[thread overview]
Message-ID: <1539042945-28811-1-git-send-email-jsanka@codeaurora.org> (raw)

While creating display and event threads per crtc, validate
them before setting their priorities.

changes in v2:
	- use dev_warn (Abhinav Kumar)
changes in v3:
	- fix compilation error

Change-Id: I1dda805286df981c0f0e2b26507d089d3a21ff6c
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
---
 drivers/gpu/drm/msm/msm_drv.c | 49 ++++++++++++++-----------------------------
 1 file changed, 16 insertions(+), 33 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 4904d0d..ab1b0a9 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -553,17 +553,18 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
 			kthread_run(kthread_worker_fn,
 				&priv->disp_thread[i].worker,
 				"crtc_commit:%d", priv->disp_thread[i].crtc_id);
-		ret = sched_setscheduler(priv->disp_thread[i].thread,
-							SCHED_FIFO, &param);
-		if (ret)
-			pr_warn("display thread priority update failed: %d\n",
-									ret);
-
 		if (IS_ERR(priv->disp_thread[i].thread)) {
 			dev_err(dev, "failed to create crtc_commit kthread\n");
 			priv->disp_thread[i].thread = NULL;
+			goto err_msm_uninit;
 		}
 
+		ret = sched_setscheduler(priv->disp_thread[i].thread,
+					 SCHED_FIFO, &param);
+		if (ret)
+			dev_warn(dev, "display thread priority update failed: %d\n",
+				ret);
+
 		/* initialize event thread */
 		priv->event_thread[i].crtc_id = priv->crtcs[i]->base.id;
 		kthread_init_worker(&priv->event_thread[i].worker);
@@ -572,6 +573,12 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
 			kthread_run(kthread_worker_fn,
 				&priv->event_thread[i].worker,
 				"crtc_event:%d", priv->event_thread[i].crtc_id);
+		if (IS_ERR(priv->event_thread[i].thread)) {
+			dev_err(dev, "failed to create crtc_event kthread\n");
+			priv->event_thread[i].thread = NULL;
+			goto err_msm_uninit;
+		}
+
 		/**
 		 * event thread should also run at same priority as disp_thread
 		 * because it is handling frame_done events. A lower priority
@@ -580,34 +587,10 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
 		 * failure at crtc commit level.
 		 */
 		ret = sched_setscheduler(priv->event_thread[i].thread,
-							SCHED_FIFO, &param);
+					 SCHED_FIFO, &param);
 		if (ret)
-			pr_warn("display event thread priority update failed: %d\n",
-									ret);
-
-		if (IS_ERR(priv->event_thread[i].thread)) {
-			dev_err(dev, "failed to create crtc_event kthread\n");
-			priv->event_thread[i].thread = NULL;
-		}
-
-		if ((!priv->disp_thread[i].thread) ||
-				!priv->event_thread[i].thread) {
-			/* clean up previously created threads if any */
-			for ( ; i >= 0; i--) {
-				if (priv->disp_thread[i].thread) {
-					kthread_stop(
-						priv->disp_thread[i].thread);
-					priv->disp_thread[i].thread = NULL;
-				}
-
-				if (priv->event_thread[i].thread) {
-					kthread_stop(
-						priv->event_thread[i].thread);
-					priv->event_thread[i].thread = NULL;
-				}
-			}
-			goto err_msm_uninit;
-		}
+			dev_warn(dev, "display event thread priority update failed:%d\n",
+				ret);
 	}
 
 	ret = drm_vblank_init(ddev, priv->num_crtcs);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2018-10-08 23:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-08 23:55 Jeykumar Sankaran [this message]
     [not found] ` <1539042945-28811-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-10-09 14:24   ` [PATCH v3] drm/msm: validate display and event threads Sean Paul
2018-10-09 18:13     ` Jeykumar Sankaran

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1539042945-28811-1-git-send-email-jsanka@codeaurora.org \
    --to=jsanka@codeaurora.org \
    --cc=abhinavk@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=hoegsberg@google.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=seanpaul@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).