[PATCH 0/3] media: venus: Update clock scaling

Aniket Masule
2019-08-27T06:20:02Z

In this patch series, clock scaling and core selection methods are
updated. Current clock scaling is same for vpu4 and previous versions.
Introducing load calculations using vpp cycles, which indicates the
cycles required by video hardware to process each macroblock. Also
adding vsp cycles, cycles require by stream processor. Clock scaling
is now done more precisely using vpp and vsp cycles.
Removing core selection from this series, there will be separate patch
once issue related to power domain is fixed.

This patch depends on the following patches:
https://lore.kernel.org/patchwork/patch/1114762/ - Venus interconnect support for sdm845
https://lore.kernel.org/patchwork/patch/1114761/ - Venus interconnect support for sdm845

Changes since v6:
- Removed core selection.
- Corrected frequency calculations.
- Removed instance lock used while iterating over buffers.

Changes since v5:
- Corrected load_per_core calculations.

Changes since v4:
- Added call to load_scale_clocks from venus_helper_vb2_buf_queue.
- Modified check to match core_id in core_selection.

Changes since v3:
- vsp_cycles and vpp_cyles are now unsigned long.
- Core number counting aligned with VIDC_CORE_ID_.
- Aligned hardware overload handling of scale_clocks_v4 with scale_clocks.
- Added bitrate based clock scaling patch in this patch series.
- Instance state check is now moved from scale_clocks to load_scale_clocks.

Aniket Masule (3):
media: venus: Add codec data table
media: venus: Update clock scaling
media: venus: Update to bitrate based clock scaling

drivers/media/platform/qcom/venus/core.c | 13 ++
drivers/media/platform/qcom/venus/core.h | 16 +++
drivers/media/platform/qcom/venus/helpers.c | 188 +++++++++++++++++++++++++---
drivers/media/platform/qcom/venus/helpers.h | 3 +-
drivers/media/platform/qcom/venus/vdec.c | 8 +-
drivers/media/platform/qcom/venus/venc.c | 4 +
6 files changed, 209 insertions(+), 23 deletions(-)