From: Jordan Crouse <jcrouse@codeaurora.org>
To: linux-arm-msm@vger.kernel.org
Cc: Sharat Masetty <smasetty@codeaurora.org>,
dianders@chromium.org, Sean Paul <sean@poorly.run>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Rob Clark <robdclark@gmail.com>, David Airlie <airlied@linux.ie>,
freedreno@lists.freedesktop.org, Daniel Vetter <daniel@ffwll.ch>
Subject: [PATCH] drm/msm/a6xx: Update the GMU bus tables for sc7180
Date: Wed, 5 Feb 2020 10:01:21 -0700 [thread overview]
Message-ID: <1580922081-25177-1-git-send-email-jcrouse@codeaurora.org> (raw)
Fixup the GMU bus table values for the sc7180 target.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 85 ++++++++++++++++++++++++-----------
1 file changed, 60 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
index eda11ab..e450e0b 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
@@ -7,6 +7,7 @@
#include "a6xx_gmu.h"
#include "a6xx_gmu.xml.h"
+#include "a6xx_gpu.h"
#define HFI_MSG_ID(val) [val] = #val
@@ -216,48 +217,82 @@ static int a6xx_hfi_send_perf_table(struct a6xx_gmu *gmu)
NULL, 0);
}
-static int a6xx_hfi_send_bw_table(struct a6xx_gmu *gmu)
+static void a618_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
{
- struct a6xx_hfi_msg_bw_table msg = { 0 };
+ /* Send a single "off" entry since the 618 GMU doesn't do bus scaling */
+ msg->bw_level_num = 1;
+
+ msg->ddr_cmds_num = 3;
+ msg->ddr_wait_bitmask = 0x01;
+
+ msg->ddr_cmds_addrs[0] = 0x50000;
+ msg->ddr_cmds_addrs[1] = 0x5003c;
+ msg->ddr_cmds_addrs[2] = 0x5000c;
+
+ msg->ddr_cmds_data[0][0] = 0x40000000;
+ msg->ddr_cmds_data[0][1] = 0x40000000;
+ msg->ddr_cmds_data[0][2] = 0x40000000;
/*
- * The sdm845 GMU doesn't do bus frequency scaling on its own but it
- * does need at least one entry in the list because it might be accessed
- * when the GMU is shutting down. Send a single "off" entry.
+ * These are the CX (CNOC) votes - these are used by the GMU but the
+ * votes are known and fixed for the target
*/
+ msg->cnoc_cmds_num = 1;
+ msg->cnoc_wait_bitmask = 0x01;
+
+ msg->cnoc_cmds_addrs[0] = 0x5007c;
+ msg->cnoc_cmds_data[0][0] = 0x40000000;
+ msg->cnoc_cmds_data[1][0] = 0x60000001;
+}
- msg.bw_level_num = 1;
+static void a6xx_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
+{
+ /* Send a single "off" entry since the 630 GMU doesn't do bus scaling */
+ msg->bw_level_num = 1;
- msg.ddr_cmds_num = 3;
- msg.ddr_wait_bitmask = 0x07;
+ msg->ddr_cmds_num = 3;
+ msg->ddr_wait_bitmask = 0x07;
- msg.ddr_cmds_addrs[0] = 0x50000;
- msg.ddr_cmds_addrs[1] = 0x5005c;
- msg.ddr_cmds_addrs[2] = 0x5000c;
+ msg->ddr_cmds_addrs[0] = 0x50000;
+ msg->ddr_cmds_addrs[1] = 0x5005c;
+ msg->ddr_cmds_addrs[2] = 0x5000c;
- msg.ddr_cmds_data[0][0] = 0x40000000;
- msg.ddr_cmds_data[0][1] = 0x40000000;
- msg.ddr_cmds_data[0][2] = 0x40000000;
+ msg->ddr_cmds_data[0][0] = 0x40000000;
+ msg->ddr_cmds_data[0][1] = 0x40000000;
+ msg->ddr_cmds_data[0][2] = 0x40000000;
/*
* These are the CX (CNOC) votes. This is used but the values for the
* sdm845 GMU are known and fixed so we can hard code them.
*/
- msg.cnoc_cmds_num = 3;
- msg.cnoc_wait_bitmask = 0x05;
+ msg->cnoc_cmds_num = 3;
+ msg->cnoc_wait_bitmask = 0x05;
- msg.cnoc_cmds_addrs[0] = 0x50034;
- msg.cnoc_cmds_addrs[1] = 0x5007c;
- msg.cnoc_cmds_addrs[2] = 0x5004c;
+ msg->cnoc_cmds_addrs[0] = 0x50034;
+ msg->cnoc_cmds_addrs[1] = 0x5007c;
+ msg->cnoc_cmds_addrs[2] = 0x5004c;
- msg.cnoc_cmds_data[0][0] = 0x40000000;
- msg.cnoc_cmds_data[0][1] = 0x00000000;
- msg.cnoc_cmds_data[0][2] = 0x40000000;
+ msg->cnoc_cmds_data[0][0] = 0x40000000;
+ msg->cnoc_cmds_data[0][1] = 0x00000000;
+ msg->cnoc_cmds_data[0][2] = 0x40000000;
+
+ msg->cnoc_cmds_data[1][0] = 0x60000001;
+ msg->cnoc_cmds_data[1][1] = 0x20000001;
+ msg->cnoc_cmds_data[1][2] = 0x60000001;
+}
+
+
+static int a6xx_hfi_send_bw_table(struct a6xx_gmu *gmu)
+{
+ struct a6xx_hfi_msg_bw_table msg = { 0 };
+ struct a6xx_gpu *a6xx_gpu = container_of(gmu, struct a6xx_gpu, gmu);
+ struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
- msg.cnoc_cmds_data[1][0] = 0x60000001;
- msg.cnoc_cmds_data[1][1] = 0x20000001;
- msg.cnoc_cmds_data[1][2] = 0x60000001;
+ if (adreno_is_a618(adreno_gpu))
+ a618_build_bw_table(&msg);
+ else
+ a6xx_build_bw_table(&msg);
return a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_BW_TABLE, &msg, sizeof(msg),
NULL, 0);
--
2.7.4
next reply other threads:[~2020-02-05 17:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-05 17:01 Jordan Crouse [this message]
2020-02-05 21:18 ` [PATCH] drm/msm/a6xx: Update the GMU bus tables for sc7180 Rob Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1580922081-25177-1-git-send-email-jcrouse@codeaurora.org \
--to=jcrouse@codeaurora.org \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
--cc=smasetty@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox