From: Sivaprakash Murugesan <sivaprak@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
robh+dt@kernel.org, mturquette@baylibre.com, sboyd@kernel.org,
p.zabel@pengutronix.de, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org
Cc: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Subject: [PATCH 2/4] reset: qcom: ipq8074: Add ipq8074 gcc resets
Date: Tue, 14 Jul 2020 20:35:20 +0530 [thread overview]
Message-ID: <1594739122-29327-3-git-send-email-sivaprak@codeaurora.org> (raw)
In-Reply-To: <1594739122-29327-1-git-send-email-sivaprak@codeaurora.org>
Add gcc resets found in ipq8074 devices. These were previously added
along with clock bindings.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
---
include/dt-bindings/reset/qcom,gcc-ipq8074.h | 141 +++++++++++++++++++++++++++
1 file changed, 141 insertions(+)
create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq8074.h
diff --git a/include/dt-bindings/reset/qcom,gcc-ipq8074.h b/include/dt-bindings/reset/qcom,gcc-ipq8074.h
new file mode 100644
index 000000000000..35ee28e00e70
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,gcc-ipq8074.h
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+#ifndef _DT_BINDINGS_RESET_IPQ_GCC_8074_H
+#define _DT_BINDINGS_RESET_IPQ_GCC_8074_H
+
+#define GCC_BLSP1_BCR 0
+#define GCC_BLSP1_QUP1_BCR 1
+#define GCC_BLSP1_UART1_BCR 2
+#define GCC_BLSP1_QUP2_BCR 3
+#define GCC_BLSP1_UART2_BCR 4
+#define GCC_BLSP1_QUP3_BCR 5
+#define GCC_BLSP1_UART3_BCR 6
+#define GCC_BLSP1_QUP4_BCR 7
+#define GCC_BLSP1_UART4_BCR 8
+#define GCC_BLSP1_QUP5_BCR 9
+#define GCC_BLSP1_UART5_BCR 10
+#define GCC_BLSP1_QUP6_BCR 11
+#define GCC_BLSP1_UART6_BCR 12
+#define GCC_IMEM_BCR 13
+#define GCC_SMMU_BCR 14
+#define GCC_APSS_TCU_BCR 15
+#define GCC_SMMU_XPU_BCR 16
+#define GCC_PCNOC_TBU_BCR 17
+#define GCC_SMMU_CFG_BCR 18
+#define GCC_PRNG_BCR 19
+#define GCC_BOOT_ROM_BCR 20
+#define GCC_CRYPTO_BCR 21
+#define GCC_WCSS_BCR 22
+#define GCC_WCSS_Q6_BCR 23
+#define GCC_NSS_BCR 24
+#define GCC_SEC_CTRL_BCR 25
+#define GCC_ADSS_BCR 26
+#define GCC_DDRSS_BCR 27
+#define GCC_SYSTEM_NOC_BCR 28
+#define GCC_PCNOC_BCR 29
+#define GCC_TCSR_BCR 30
+#define GCC_QDSS_BCR 31
+#define GCC_DCD_BCR 32
+#define GCC_MSG_RAM_BCR 33
+#define GCC_MPM_BCR 34
+#define GCC_SPMI_BCR 35
+#define GCC_SPDM_BCR 36
+#define GCC_RBCPR_BCR 37
+#define GCC_RBCPR_MX_BCR 38
+#define GCC_TLMM_BCR 39
+#define GCC_RBCPR_WCSS_BCR 40
+#define GCC_USB0_PHY_BCR 41
+#define GCC_USB3PHY_0_PHY_BCR 42
+#define GCC_USB0_BCR 43
+#define GCC_USB1_PHY_BCR 44
+#define GCC_USB3PHY_1_PHY_BCR 45
+#define GCC_USB1_BCR 46
+#define GCC_QUSB2_0_PHY_BCR 47
+#define GCC_QUSB2_1_PHY_BCR 48
+#define GCC_SDCC1_BCR 49
+#define GCC_SDCC2_BCR 50
+#define GCC_SNOC_BUS_TIMEOUT0_BCR 51
+#define GCC_SNOC_BUS_TIMEOUT2_BCR 52
+#define GCC_SNOC_BUS_TIMEOUT3_BCR 53
+#define GCC_PCNOC_BUS_TIMEOUT0_BCR 54
+#define GCC_PCNOC_BUS_TIMEOUT1_BCR 55
+#define GCC_PCNOC_BUS_TIMEOUT2_BCR 56
+#define GCC_PCNOC_BUS_TIMEOUT3_BCR 57
+#define GCC_PCNOC_BUS_TIMEOUT4_BCR 58
+#define GCC_PCNOC_BUS_TIMEOUT5_BCR 59
+#define GCC_PCNOC_BUS_TIMEOUT6_BCR 60
+#define GCC_PCNOC_BUS_TIMEOUT7_BCR 61
+#define GCC_PCNOC_BUS_TIMEOUT8_BCR 62
+#define GCC_PCNOC_BUS_TIMEOUT9_BCR 63
+#define GCC_UNIPHY0_BCR 64
+#define GCC_UNIPHY1_BCR 65
+#define GCC_UNIPHY2_BCR 66
+#define GCC_CMN_12GPLL_BCR 67
+#define GCC_QPIC_BCR 68
+#define GCC_MDIO_BCR 69
+#define GCC_PCIE1_TBU_BCR 70
+#define GCC_WCSS_CORE_TBU_BCR 71
+#define GCC_WCSS_Q6_TBU_BCR 72
+#define GCC_USB0_TBU_BCR 73
+#define GCC_USB1_TBU_BCR 74
+#define GCC_PCIE0_TBU_BCR 75
+#define GCC_NSS_NOC_TBU_BCR 76
+#define GCC_PCIE0_BCR 77
+#define GCC_PCIE0_PHY_BCR 78
+#define GCC_PCIE0PHY_PHY_BCR 79
+#define GCC_PCIE0_LINK_DOWN_BCR 80
+#define GCC_PCIE1_BCR 81
+#define GCC_PCIE1_PHY_BCR 82
+#define GCC_PCIE1PHY_PHY_BCR 83
+#define GCC_PCIE1_LINK_DOWN_BCR 84
+#define GCC_DCC_BCR 85
+#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 86
+#define GCC_APC1_VOLTAGE_DROOP_DETECTOR_BCR 87
+#define GCC_SMMU_CATS_BCR 88
+#define GCC_UBI0_AXI_ARES 89
+#define GCC_UBI0_AHB_ARES 90
+#define GCC_UBI0_NC_AXI_ARES 91
+#define GCC_UBI0_DBG_ARES 92
+#define GCC_UBI0_CORE_CLAMP_ENABLE 93
+#define GCC_UBI0_CLKRST_CLAMP_ENABLE 94
+#define GCC_UBI1_AXI_ARES 95
+#define GCC_UBI1_AHB_ARES 96
+#define GCC_UBI1_NC_AXI_ARES 97
+#define GCC_UBI1_DBG_ARES 98
+#define GCC_UBI1_CORE_CLAMP_ENABLE 99
+#define GCC_UBI1_CLKRST_CLAMP_ENABLE 100
+#define GCC_NSS_CFG_ARES 101
+#define GCC_NSS_IMEM_ARES 102
+#define GCC_NSS_NOC_ARES 103
+#define GCC_NSS_CRYPTO_ARES 104
+#define GCC_NSS_CSR_ARES 105
+#define GCC_NSS_CE_APB_ARES 106
+#define GCC_NSS_CE_AXI_ARES 107
+#define GCC_NSSNOC_CE_APB_ARES 108
+#define GCC_NSSNOC_CE_AXI_ARES 109
+#define GCC_NSSNOC_UBI0_AHB_ARES 110
+#define GCC_NSSNOC_UBI1_AHB_ARES 111
+#define GCC_NSSNOC_SNOC_ARES 112
+#define GCC_NSSNOC_CRYPTO_ARES 113
+#define GCC_NSSNOC_ATB_ARES 114
+#define GCC_NSSNOC_QOSGEN_REF_ARES 115
+#define GCC_NSSNOC_TIMEOUT_REF_ARES 116
+#define GCC_PCIE0_PIPE_ARES 117
+#define GCC_PCIE0_SLEEP_ARES 118
+#define GCC_PCIE0_CORE_STICKY_ARES 119
+#define GCC_PCIE0_AXI_MASTER_ARES 120
+#define GCC_PCIE0_AXI_SLAVE_ARES 121
+#define GCC_PCIE0_AHB_ARES 122
+#define GCC_PCIE0_AXI_MASTER_STICKY_ARES 123
+#define GCC_PCIE1_PIPE_ARES 124
+#define GCC_PCIE1_SLEEP_ARES 125
+#define GCC_PCIE1_CORE_STICKY_ARES 126
+#define GCC_PCIE1_AXI_MASTER_ARES 127
+#define GCC_PCIE1_AXI_SLAVE_ARES 128
+#define GCC_PCIE1_AHB_ARES 129
+#define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130
+#define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131
+
+#endif
--
2.7.4
next prev parent reply other threads:[~2020-07-14 15:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-14 15:05 [PATCH 0/4] Split ipq8074 reset bindings from clock bindings Sivaprakash Murugesan
2020-07-14 15:05 ` [PATCH 1/4] clk: qcom: ipq8074: remove gcc reset bindings Sivaprakash Murugesan
2020-07-14 15:05 ` Sivaprakash Murugesan [this message]
2020-07-14 15:05 ` [PATCH 3/4] arm64: dts: ipq8074: include " Sivaprakash Murugesan
2020-07-14 15:05 ` [PATCH 4/4] clk: qcom: ipq8074: include gcc " Sivaprakash Murugesan
2020-07-16 0:55 ` [PATCH 0/4] Split ipq8074 reset bindings from clock bindings Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1594739122-29327-3-git-send-email-sivaprak@codeaurora.org \
--to=sivaprak@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox