[PATCH 5/8] mhi: pci_generic: Add suspend/resume/recovery procedure

[Loic Poulain <loic.poulain@linaro.org>]

Add support for system wide suspend/resume. During suspend, MHI
device controller must be put in M3 state and PCI bus in D3 state.

Add a recovery procedure allowing to reinitialize the device in case
of error during resume steps, which can happen if device loses power
(and so its context) while system suspend.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
 drivers/bus/mhi/pci_generic.c | 100 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
index b48c382..75f565b 100644
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -13,6 +13,7 @@
 #include <linux/mhi.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/workqueue.h>
 
 #define MHI_PCI_DEFAULT_BAR_NUM 0
 
@@ -187,6 +188,7 @@ enum mhi_pci_device_status {
 struct mhi_pci_device {
 	struct mhi_controller mhi_cntrl;
 	struct pci_saved_state *pci_state;
+	struct work_struct recovery_work;
 	unsigned long status;
 };
 
@@ -319,6 +321,48 @@ static void mhi_pci_runtime_put(struct mhi_controller *mhi_cntrl)
 	/* no PM for now */
 }
 
+static void mhi_pci_recovery_work(struct work_struct *work)
+{
+	struct mhi_pci_device *mhi_pdev = container_of(work, struct mhi_pci_device,
+						       recovery_work);
+	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+	struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
+	int err;
+
+	dev_warn(&pdev->dev, "device recovery started\n");
+
+	/* Clean up MHI state */
+	if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
+		mhi_power_down(mhi_cntrl, false);
+		mhi_unprepare_after_power_down(mhi_cntrl);
+	}
+
+	/* Check if we can recover without full reset */
+	pci_set_power_state(pdev, PCI_D0);
+	pci_load_saved_state(pdev, mhi_pdev->pci_state);
+	pci_restore_state(pdev);
+
+	if (!mhi_pci_is_alive(mhi_cntrl))
+		goto err_try_reset;
+
+	err = mhi_prepare_for_power_up(mhi_cntrl);
+	if (err)
+		goto err_try_reset;
+
+	err = mhi_sync_power_up(mhi_cntrl);
+	if (err)
+		goto err_unprepare;
+
+	set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
+	return;
+
+err_unprepare:
+	mhi_unprepare_after_power_down(mhi_cntrl);
+err_try_reset:
+	if (pci_reset_function(pdev))
+		dev_err(&pdev->dev, "Recovery failed\n");
+}
+
 static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data;
@@ -333,6 +377,8 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (!mhi_pdev)
 		return -ENOMEM;
 
+	INIT_WORK(&mhi_pdev->recovery_work, mhi_pci_recovery_work);
+
 	mhi_cntrl_config = info->config;
 	mhi_cntrl = &mhi_pdev->mhi_cntrl;
 	mhi_cntrl->cntrl_dev = &pdev->dev;
@@ -395,6 +441,8 @@ static void mhi_pci_remove(struct pci_dev *pdev)
 	struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
 	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
 
+	cancel_work_sync(&mhi_pdev->recovery_work);
+
 	if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
 		mhi_power_down(mhi_cntrl, true);
 		mhi_unprepare_after_power_down(mhi_cntrl);
@@ -463,12 +511,64 @@ static const struct pci_error_handlers mhi_pci_err_handler = {
 	.reset_done = mhi_pci_reset_done,
 };
 
+int  __maybe_unused mhi_pci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
+	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+	/* Transition to M3 state */
+	mhi_pm_suspend(mhi_cntrl);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_wake_from_d3(pdev, true);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+static int __maybe_unused mhi_pci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
+	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+	int err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_set_master(pdev);
+
+	err = pci_enable_device(pdev);
+	if (err)
+		goto err_recovery;
+
+	/* Exit M3, transition to M0 state */
+	err = mhi_pm_resume(mhi_cntrl);
+	if (err) {
+		dev_err(&pdev->dev, "failed to resume device: %d\n", err);
+		goto err_recovery;
+	}
+
+	return 0;
+
+err_recovery:
+	/* The device may have loose power or crashed, try recovering it */
+	queue_work(system_long_wq, &mhi_pdev->recovery_work);
+	return 0;
+}
+
+static const struct dev_pm_ops mhi_pci_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mhi_pci_suspend, mhi_pci_resume)
+};
+
 static struct pci_driver mhi_pci_driver = {
 	.name		= "mhi-pci-generic",
 	.id_table	= mhi_pci_id_table,
 	.probe		= mhi_pci_probe,
 	.remove		= mhi_pci_remove,
 	.err_handler	= &mhi_pci_err_handler,
+	.driver.pm	= &mhi_pci_pm_ops
 };
 module_pci_driver(mhi_pci_driver);
 
-- 
2.7.4