Re: [PATCH v4] arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub

[patchwork-bot+linux-arm-msm@kernel.org]

Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

On Tue, 24 Nov 2020 16:48:13 -0800 you wrote:
> The trogdor design has two options for supplying the 'pp3300_hub' power
> rail, it can be supplied by 'pp3300_l7c' or 'pp3300_a'. The 'pp3300_a'
> path includes a load switch that can be controlled through GPIO84.
> Initially trogdor boards used 'pp3300_l7c' to power the USB hub, newer
> revisions (will) use 'pp3300_a' as supply for 'pp3300_hub'.
> 
> Add a DT node for the 'pp3300_a' path and a pinctrl entry for the GPIO.
> Make this path the default and keep trogdor rev1, lazor rev0 and rev1
> on 'pp3300_l7c'. These earlier revisions also allocated the GPIO to the
> purpose of controlling the power switch, so there is no need to limit
> the pinctrl config to newer revisions. Remove the platform-wide
> 'always/boot-on' properties from 'pp3300_l7c' and add them to the
> boards that use this supply. Also delete the 'always/boot-on'
> properties of 'pp3300_hub' for these boards.
> 
> [...]

Here is the summary with links:
  - [v4] arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub
    https://git.kernel.org/qcom/c/066c2a944868

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html