[PATCH V1 2/2] backlight: qcom-wled: Correct the sync_toggle sequence

Kiran Gunda
2021-02-19T14:09:30Z

Currently the FSC SYNC_BIT and MOD_SYNC_BIT are toggled
from 1 to 0 to update the FSC and brightenss settings.
Change this sequence form 0 to 1 as per the hardware team
recommendation to update the FSC and brightness correctly.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
drivers/video/backlight/qcom-wled.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index aef52b9..19f83ac 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -337,13 +337,13 @@ static int wled3_sync_toggle(struct wled *wled)

rc = regmap_update_bits(wled->regmap,
wled->ctrl_addr + WLED3_SINK_REG_SYNC,
- mask, mask);
+ mask, WLED3_SINK_REG_SYNC_CLEAR);
if (rc < 0)
return rc;

rc = regmap_update_bits(wled->regmap,
wled->ctrl_addr + WLED3_SINK_REG_SYNC,
- mask, WLED3_SINK_REG_SYNC_CLEAR);
+ mask, mask);

return rc;
}
@@ -353,17 +353,17 @@ static int wled5_mod_sync_toggle(struct wled *wled)
int rc;
u8 val;

- val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
- WLED5_SINK_REG_SYNC_MOD_B_BIT;
rc = regmap_update_bits(wled->regmap,
wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
- WLED5_SINK_REG_SYNC_MASK, val);
+ WLED5_SINK_REG_SYNC_MASK, 0);
if (rc < 0)
return rc;

+ val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
+ WLED5_SINK_REG_SYNC_MOD_B_BIT;
return regmap_update_bits(wled->regmap,
wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
- WLED5_SINK_REG_SYNC_MASK, 0);
+ WLED5_SINK_REG_SYNC_MASK, val);
}

static int wled_ovp_fault_status(struct wled *wled, bool *fault_set)