Re: [v2 1/2] clk: qcom: gdsc: Add support to update GDSC transition delay

[patchwork-bot+linux-arm-msm@kernel.org]

Hello:

This series was applied to qcom/linux.git (for-next)
by Stephen Boyd <sboyd@kernel.org>:

On Thu, 24 Feb 2022 00:26:05 +0530 you wrote:
> GDSCs have multiple transition delays which are used for the GDSC FSM
> states. Older targets/designs required these values to be updated from
> gdsc code to certain default values for the FSM state to work as
> expected. But on the newer targets/designs the values updated from the
> GDSC driver can hamper the FSM state to not work as expected.
> 
> On SC7180 we observe black screens because the gdsc is being
> enabled/disabled very rapidly and the GDSC FSM state does not work as
> expected. This is due to the fact that the GDSC reset value is being
> updated from SW.
> 
> [...]

Here is the summary with links:
  - [v2,1/2] clk: qcom: gdsc: Add support to update GDSC transition delay
    https://git.kernel.org/qcom/c/4e7c4d3652f9
  - [v2,2/2] clk: qcom: dispcc: Update the transition delay for MDSS GDSC
    https://git.kernel.org/qcom/c/6e6fec3f961c

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html