[PATCH v8 11/15] drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver

[Vinod Polimera <quic_vpolimer@quicinc.com>]

Enable PSR on eDP interface using drm self-refresh librabry.
This patch uses a trigger from self-refresh library to enter/exit
into PSR, when there are no updates from framework.

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    | 13 ++++++++++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 14 ++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |  2 +-
 3 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 8ec9a13..5ba4963 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -21,6 +21,7 @@
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_rect.h>
 #include <drm/drm_vblank.h>
+#include <drm/drm_self_refresh_helper.h>
 
 #include "dpu_kms.h"
 #include "dpu_hw_lm.h"
@@ -1018,6 +1019,9 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
 
 	DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
 
+	if (old_crtc_state->self_refresh_active)
+		return;
+
 	/* Disable/save vblank irq handling */
 	drm_crtc_vblank_off(crtc);
 
@@ -1572,7 +1576,7 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
 {
 	struct drm_crtc *crtc = NULL;
 	struct dpu_crtc *dpu_crtc = NULL;
-	int i;
+	int i, ret;
 
 	dpu_crtc = kzalloc(sizeof(*dpu_crtc), GFP_KERNEL);
 	if (!dpu_crtc)
@@ -1609,6 +1613,13 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
 	/* initialize event handling */
 	spin_lock_init(&dpu_crtc->event_lock);
 
+	ret = drm_self_refresh_helper_init(crtc);
+	if (ret) {
+		DPU_ERROR("Failed to initialize %s with self-refresh helpers %d\n",
+			crtc->name, ret);
+		return ERR_PTR(ret);
+	}
+
 	DRM_DEBUG_KMS("%s: successfully initialized crtc\n", dpu_crtc->name);
 	return crtc;
 }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index e8c3518..9f4f4e5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -12,6 +12,7 @@
 #include <linux/kthread.h>
 #include <linux/seq_file.h>
 
+#include <drm/drm_atomic.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_file.h>
 #include <drm/drm_probe_helper.h>
@@ -1208,11 +1209,24 @@ static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
 					struct drm_atomic_state *state)
 {
 	struct dpu_encoder_virt *dpu_enc = NULL;
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *old_state = NULL;
 	int i = 0;
 
 	dpu_enc = to_dpu_encoder_virt(drm_enc);
 	DPU_DEBUG_ENC(dpu_enc, "\n");
 
+	crtc = drm_atomic_get_old_crtc_for_encoder(state, drm_enc);
+	if (crtc)
+		old_state = drm_atomic_get_old_crtc_state(state, crtc);
+
+	/*
+	 * The encoder is already disabled if self refresh mode was set earlier,
+	 * in the old_state for the corresponding crtc.
+	 */
+	if (old_state && old_state->self_refresh_active)
+		return;
+
 	mutex_lock(&dpu_enc->enc_lock);
 	dpu_enc->enabled = false;
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 5e6e262..0247f39 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -503,7 +503,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
 		return;
 	}
 
-	if (!crtc->state->active) {
+	if (!drm_atomic_crtc_effectively_active(crtc->state)) {
 		DPU_DEBUG("[crtc:%d] not active\n", crtc->base.id);
 		return;
 	}
-- 
2.7.4