From: Can Guo <quic_cang@quicinc.com>
To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org,
adrian.hunter@intel.com, beanhuo@micron.com, avri.altman@wdc.com,
junwoo80.lee@samsung.com, martin.petersen@oracle.com
Cc: linux-scsi@vger.kernel.org, Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Johan Hovold <johan+linaro@kernel.org>,
Abel Vesa <abel.vesa@linaro.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
linux-arm-msm@vger.kernel.org (open list:ARM/QUALCOMM SUPPORT),
linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v4 08/10] phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
Date: Thu, 23 Nov 2023 00:36:14 -0800 [thread overview]
Message-ID: <1700728577-14729-9-git-send-email-quic_cang@quicinc.com> (raw)
In-Reply-To: <1700728577-14729-1-git-send-email-quic_cang@quicinc.com>
The registers, which are being touched in current SM8550 UFS PHY settings,
and the values being programmed are mainly the ones working for HS-G4 mode,
meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings.
However, even consider HS-G4 mode only, some of them are incorrect and some
are missing. Rectify the HS-G4 PHY settings by strictly aligning with the
SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings.
Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
---
.../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 3 +++
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 28 +++++++++++++++-------
2 files changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
index 15bcb4b..674f158 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
@@ -10,9 +10,12 @@
#define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX 0x2c
#define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30
#define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34
+#define QSERDES_UFS_V6_TX_LANE_MODE_1 0x7c
+#define QSERDES_UFS_V6_TX_FR_DCC_CTRL 0x108
#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08
#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10
+#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4
#define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178
#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208
#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 3927eba..ad91f92 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -658,22 +658,26 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = {
QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
- QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c),
- QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
- QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
- QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
- QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99),
- QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44),
};
static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = {
- QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c),
};
static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = {
- QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2, 0x0c),
- QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2),
@@ -696,6 +700,8 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = {
QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b),
QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
};
struct qmp_ufs_offsets {
@@ -1157,6 +1163,10 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = {
.pcs = sm8550_ufsphy_pcs,
.pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs),
},
+ .tbls_hs_b = {
+ .serdes = sm8550_ufsphy_hs_b_serdes,
+ .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes),
+ },
.clk_list = sdm845_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
.vreg_list = qmp_phy_vreg_l,
--
2.7.4
next prev parent reply other threads:[~2023-11-23 8:36 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1700728577-14729-1-git-send-email-quic_cang@quicinc.com>
2023-11-23 8:36 ` [PATCH v4 01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params Can Guo
2023-11-23 8:36 ` [PATCH v4 02/10] scsi: ufs: ufs-qcom: No need to set hs_rate after ufshcd_init_host_param() Can Guo
2023-11-23 8:36 ` [PATCH v4 03/10] scsi: ufs: ufs-qcom: Setup host power mode during init Can Guo
2023-11-23 8:36 ` [PATCH v4 04/10] scsi: ufs: ufs-qcom: Limit negotiated gear to selected PHY gear Can Guo
2023-11-23 8:36 ` [PATCH v4 05/10] scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear Can Guo
2023-11-23 8:36 ` [PATCH v4 06/10] scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5 Can Guo
2023-11-23 8:36 ` [PATCH v4 07/10] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 5 and newer Can Guo
2023-11-23 8:36 ` Can Guo [this message]
2023-11-23 8:36 ` [PATCH v4 09/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550 Can Guo
2023-11-23 8:36 ` [PATCH v4 10/10] scsi: ufs: ufs-qcom: Add support for UFS device version detection Can Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1700728577-14729-9-git-send-email-quic_cang@quicinc.com \
--to=quic_cang@quicinc.com \
--cc=abel.vesa@linaro.org \
--cc=adrian.hunter@intel.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=johan+linaro@kernel.org \
--cc=junwoo80.lee@samsung.com \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mani@kernel.org \
--cc=martin.petersen@oracle.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox