Re: [PATCH 2/3] soc: qcom: spm: Add MSM8960 SAW2 CPU support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 5/14/26 9:04 AM, Rudraksha Gupta via B4 Relay wrote:
> From: Rudraksha Gupta <guptarud@gmail.com>
> 
> The MSM8960 uses SAW2 v1.1, the same hardware version as the APQ8064.
> Add SPM register data so that the SAW2 driver can program the correct
> SPM sequences and PMIC parameters for MSM8960 CPUs.
> 
> The register layout, SPM sequences, voltage range, and regulator
> parameters are shared with APQ8064. The only difference is pmic_dly:
> 0x03020004 on MSM8960 vs 0x02020004 on APQ8064.
> 
> Link: https://github.com/CyanogenMod/android_kernel_samsung_d2/blob/0dbe2b56847b304d30b809dfd08ba3b4a61d9af8/arch/arm/mach-msm/board-express.c#L3353-L3381
> Assisted-by: Claude:claude-opus-4.6
> Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
> ---

[...]

> +static const struct spm_reg_data spm_reg_8960_cpu = {
> +	.reg_offset = spm_reg_offset_v1_1,
> +	.spm_cfg = 0x1F,
> +	.pmic_dly = 0x03020004,
> +	.pmic_data[0] = 0x0084009C,
> +	.pmic_data[1] = 0x00A4001C,

Let's use lowercase hex

> +	.seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,
> +		0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F },

I can't see these values anywhere downstream

Konrad