From: "Gustavo F. Padovan" <gustavo@padovan.org>
To: Mat Martineau <mathewm@codeaurora.org>
Cc: linux-bluetooth@vger.kernel.org, marcel@holtmann.org,
rshaffer@codeaurora.org, linux-arm-msm@vger.kernel.org
Subject: Re: [RFC 3/7] Bluetooth: Add FCS awareness to L2CAP HCI fragmentation.
Date: Wed, 11 Aug 2010 00:35:41 -0300 [thread overview]
Message-ID: <20100811033540.GA9151@vigoh> (raw)
In-Reply-To: <1281467704-5378-4-git-send-email-mathewm@codeaurora.org>
* Mat Martineau <mathewm@codeaurora.org> [2010-08-10 12:15:00 -0700]:
> In order to not limit ERTM and streaming mode PDUs to the HCI MTU
> size, L2CAP must be able to split PDUs in to multple HCI fragments.
> This is done by allocating space for the FCS in the last fragment.
>
> Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
> ---
> net/bluetooth/l2cap.c | 39 ++++++++++++++++++++++++++++++++++-----
> 1 files changed, 34 insertions(+), 5 deletions(-)
>
> diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
> index aa69c84..b485c4a 100644
> --- a/net/bluetooth/l2cap.c
> +++ b/net/bluetooth/l2cap.c
> @@ -1664,31 +1664,63 @@ static inline int l2cap_skbuff_fromiovec(struct sock *sk, struct msghdr *msg, in
> {
> struct l2cap_conn *conn = l2cap_pi(sk)->conn;
> struct sk_buff **frag;
> + struct sk_buff *final;
> int err, sent = 0;
>
> + BT_DBG("sk %p, msg %p, len %d, count %d, skb %p", sk,
> + msg, (int)len, (int)count, skb);
> +
> if (memcpy_fromiovec(skb_put(skb, count), msg->msg_iov, count))
> return -EFAULT;
>
> sent += count;
> len -= count;
> + final = skb;
>
> /* Continuation fragments (no L2CAP header) */
> frag = &skb_shinfo(skb)->frag_list;
> while (len) {
> + int skblen;
> count = min_t(unsigned int, conn->mtu, len);
>
> - *frag = bt_skb_send_alloc(sk, count, msg->msg_flags & MSG_DONTWAIT, &err);
> + /* Add room for the FCS if it fits */
> + if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16 &&
> + len + L2CAP_FCS_SIZE <= conn->mtu)
You don't need to check for (len + L2CAP_FCS_SIZE <= conn=mtu) here.
Section 5.1 point that:
"Unlike the B-Frame length field, the I-frame length field may be greater
than the configured MTU because it includes the octet lengths of the
Control, L2CAP SDU Length (when present), and frame check sequence
fields as well as the Information octets."
>From that I understand "len <=" and not "len + L2CAP_FCS_SIZE <="
> + skblen = count + L2CAP_FCS_SIZE;
> + else
> + skblen = count;
> +
> + *frag = bt_skb_send_alloc(sk, skblen,
> + msg->msg_flags & MSG_DONTWAIT, &err);
> if (!*frag)
> return -EFAULT;
> - if (memcpy_fromiovec(skb_put(*frag, count), msg->msg_iov, count))
> +
> + if (memcpy_fromiovec(skb_put(*frag, count),
> + msg->msg_iov, count))
> return -EFAULT;
>
> sent += count;
> len -= count;
>
> + final = *frag;
> +
> frag = &(*frag)->next;
> }
>
> + if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16) {
> + if (skb_tailroom(final) < L2CAP_FCS_SIZE) {
> + *frag = bt_skb_send_alloc(sk, L2CAP_FCS_SIZE,
> + msg->msg_flags & MSG_DONTWAIT,
> + &err);
> + if (!*frag)
> + return -EFAULT;
> +
> + final = *frag;
> + }
> +
> + skb_put(final, L2CAP_FCS_SIZE);
> + }
> +
> return sent;
> }
>
> @@ -1790,9 +1822,6 @@ static struct sk_buff *l2cap_create_iframe_pdu(struct sock *sk, struct msghdr *m
> return ERR_PTR(err);
> }
>
> - if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16)
> - put_unaligned_le16(0, skb_put(skb, 2));
> -
> bt_cb(skb)->retries = 0;
> return skb;
> }
> --
> 1.7.1
>
> --
> Mat Martineau
> Employee of Qualcomm Innovation Center, Inc.
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
--
Gustavo F. Padovan
http://padovan.org
next prev parent reply other threads:[~2010-08-11 3:35 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-10 19:14 [RFC 0/7] L2CAP fragmentation changes Mat Martineau
2010-08-10 19:14 ` [RFC 1/7] Bluetooth: Calculate L2CAP FCS on fragmented skbuffs Mat Martineau
2010-08-10 21:22 ` Marcel Holtmann
2010-08-10 21:57 ` Gustavo F. Padovan
2010-08-10 19:14 ` [RFC 2/7] Bluetooth: Use enhanced L2CAP header structure and symbolic values Mat Martineau
2010-08-10 21:39 ` Marcel Holtmann
2010-08-10 22:07 ` Gustavo F. Padovan
2010-08-11 2:24 ` Mat Martineau
2010-08-11 3:23 ` Gustavo F. Padovan
2010-08-10 19:15 ` [RFC 3/7] Bluetooth: Add FCS awareness to L2CAP HCI fragmentation Mat Martineau
2010-08-10 21:29 ` Marcel Holtmann
2010-08-11 3:35 ` Gustavo F. Padovan [this message]
2010-08-11 3:56 ` Gustavo F. Padovan
2010-08-10 19:15 ` [RFC 4/7] Bluetooth: Linearize received L2CAP skbuffs Mat Martineau
2010-08-10 21:38 ` Marcel Holtmann
2010-08-11 3:58 ` Gustavo F. Padovan
2010-08-10 19:15 ` [RFC 5/7] Bluetooth: Handle fragmented skbs in bt_sock_stream_recvmsg() Mat Martineau
2010-08-11 4:25 ` Gustavo F. Padovan
2010-08-10 19:15 ` [RFC 6/7] Bluetooth: Reassemble enhanced L2CAP PDUs using skb fragments Mat Martineau
2010-08-11 5:24 ` Gustavo F. Padovan
2010-08-10 19:15 ` [RFC 7/7] Bluetooth: Do not limit enhanced L2CAP max PDU size to HCI MTU Mat Martineau
2010-08-11 5:25 ` Gustavo F. Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100811033540.GA9151@vigoh \
--to=gustavo@padovan.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mathewm@codeaurora.org \
--cc=rshaffer@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).