Re: [PATCH v2] USB: Add MSM USB Device Controller driver

[Pavan Kondeti <pkondeti@codeaurora.org>]

On Tue, Nov 09, 2010 at 02:52:09PM +0100, Matthieu CASTET wrote:
> Hi,
>
> Pavankumar Kondeti a écrit :
>
>> diff --git a/drivers/usb/gadget/msm72k_udc.c b/drivers/usb/gadget/msm72k_udc.c
>> new file mode 100644
>> index 0000000..3fa4192
>> --- /dev/null
>> +++ b/drivers/usb/gadget/msm72k_udc.c
>
>> +
>> +static unsigned ulpi_read(struct usb_info *ui, unsigned reg)
>> +{
>> +       unsigned timeout = 100000;
>> +
>> +       /* initiate read operation */
>> +       writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
>> +              USB_ULPI_VIEWPORT);
>> +
>> +       /* wait for completion */
>> +       while ((readl(USB_ULPI_VIEWPORT) & ULPI_RUN) && (--timeout))
>> +               ;
>> +
>> +       if (timeout == 0) {
>> +               dev_err(&ui->pdev->dev, "ulpi_read: timeout %08x\n",
>> +                               readl(USB_ULPI_VIEWPORT));
>> +               return 0xffffffff;
>> +       }
>> +       return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
>> +}
>> +
>> +static int ulpi_write(struct usb_info *ui, unsigned val, unsigned reg)
>> +{
>> +       unsigned timeout = 10000;
>> +
>> +       /* initiate write operation */
>> +       writel(ULPI_RUN | ULPI_WRITE |
>> +              ULPI_ADDR(reg) | ULPI_DATA(val),
>> +              USB_ULPI_VIEWPORT);
>> +
>> +       /* wait for completion */
>> +       while ((readl(USB_ULPI_VIEWPORT) & ULPI_RUN) && (--timeout))
>> +               ;
>> +
>> +       if (timeout == 0) {
>> +               dev_err(&ui->pdev->dev, "ulpi_write: timeout\n");
>> +               return -1;
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +static void ulpi_init(struct usb_info *ui)
>> +{
>> +       int *seq = ui->phy_init_seq;
>> +
>> +       if (!seq)
>> +               return;
>> +
>> +       while (seq[0] >= 0) {
>> +               dev_vdbg(&ui->pdev->dev, "ulpi: write 0x%02x to 0x%02x\n",
>> +                               seq[0], seq[1]);
>> +               ulpi_write(ui, seq[0], seq[1]);
>> +               seq += 2;
>> +       }
>> +}
>> +
>
>
> --- /dev/null
> +++ b/drivers/usb/otg/msm72k_otg.c
>
> +
> +#define ULPI_IO_TIMEOUT_USEC   (10 * 1000)
> +static int ulpi_read(struct otg_transceiver *otg, u32 reg)
> +{
> +       int cnt = 0;
> +
> +       /* initiate read operation */
> +       writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
> +              USB_ULPI_VIEWPORT);
> +
> +       /* wait for completion */
> +       while (cnt < ULPI_IO_TIMEOUT_USEC) {
> +               if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
> +                       break;
> +               udelay(1);
> +               cnt++;
> +       }
> +
> +       if (cnt >= ULPI_IO_TIMEOUT_USEC) {
> +               dev_err(otg->dev, "ulpi_read: timeout %08x\n",
> +                       readl(USB_ULPI_VIEWPORT));
> +               return -ETIMEDOUT;
> +       }
> +       return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
> +}
> +
> +static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
> +{
> +       int cnt = 0;
> +
> +       /* initiate write operation */
> +       writel(ULPI_RUN | ULPI_WRITE |
> +              ULPI_ADDR(reg) | ULPI_DATA(val),
> +              USB_ULPI_VIEWPORT);
> +
> +       /* wait for completion */
> +       while (cnt < ULPI_IO_TIMEOUT_USEC) {
> +               if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
> +                       break;
> +               udelay(1);
> +               cnt++;
> +       }
> +
> +       if (cnt >= ULPI_IO_TIMEOUT_USEC) {
> +               dev_err(otg->dev, "ulpi_write: timeout\n");
> +               return -ETIMEDOUT;
> +       }
> +       return 0;
> +}
> +
> +static struct otg_io_access_ops msm_otg_io_ops = {
> +       .read = ulpi_read,
> +       .write = ulpi_write,
> +};
> +
> +static void ulpi_init(struct msm_otg *motg)
> +{
> +       struct msm_otg_platform_data *pdata = motg->pdata;
> +       int *seq = pdata->phy_init_seq;
> +
> +       if (!seq)
> +               return;
> +
> +       while (seq[0] >= 0) {
> +               dev_vdbg(motg->otg.dev, "ulpi: write 0x%02x to 0x%02x\n",
> +                               seq[0], seq[1]);
> +               ulpi_write(&motg->otg, seq[0], seq[1]);
> +               seq += 2;
> +       }
> +}
>
>
> can't you share the ulpi fonctions from udc and otg ?

Yes. udc can use the ulpi ops defined by the otg. But in udc patch series, otg
stuff is not integrated. I will post another patch to make udc work with
otg. or you want me to add otg integration in the 1st patch series it self?
-- 
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.