From: Russell King - ARM Linux <linux@arm.linux.org.uk>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Viresh Kumar <viresh.kumar@st.com>,
Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>,
Kevin Hilman <khilman@deeprootsystems.com>,
Anton Vorontsov <avorontsov@mvista.com>,
Lennert Buytenhek <kernel@wantstofly.org>,
Kukjin Kim <kgene.kim@samsung.com>,
linux-sh@vger.kernel.org, Vincent Sanders <support@simtec.co.uk>,
"Hans J. Koch" <hjk@linutronix.de>,
Magnus Damm <magnus.damm@gmail.com>,
Scott Branden <sbranden@broadcom.com>,
Marc Singer <elf@buici.com>, Tony Lindgren <tony@atomide.com>,
David Brown <davidb@codeaurora.org>,
Alessandro Rubini <rubini@unipv.it>,
Sascha Hauer <kernel@pengutronix.de>,
Wan ZongShun <mcuos.com@gmail.com>,
linux-arm-msm@vger.kernel.org,
STEricsson <STEricsson_nomadik_linux@list.st.com>,
Ryan Mallon <ryan@bluewatersys.com>,
linux-samsung-soc@vger.kernel.org,
Ben Dooks <ben-linux@fluff.org>,
linux-tegra@vger.kernel.org, linux-omap@vger.kernel.o
Subject: Re: [RFC 1/5] ARM: P2V: separate PHYS_OFFSET from platform definitions
Date: Wed, 5 Jan 2011 00:04:44 +0000 [thread overview]
Message-ID: <20110105000444.GA1085@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <20110104212359.GH25121@pengutronix.de>
On Tue, Jan 04, 2011 at 10:23:59PM +0100, Uwe Kleine-König wrote:
> Hello Russell,
>
> On Tue, Jan 04, 2011 at 08:22:17PM +0000, Russell King - ARM Linux wrote:
> > This uncouple PHYS_OFFSET from the platform definitions, thereby
> > facilitating run-time computation of the physical memory offset.
> >
> > Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> > ---
> > arch/arm/include/asm/memory.h | 2 ++
> > arch/arm/kernel/tcm.c | 2 +-
> > arch/arm/mach-aaec2000/include/mach/memory.h | 2 +-
> > arch/arm/mach-at91/include/mach/memory.h | 2 +-
> > arch/arm/mach-bcmring/include/mach/hardware.h | 2 +-
> > arch/arm/mach-bcmring/include/mach/memory.h | 2 +-
> > arch/arm/mach-clps711x/include/mach/memory.h | 2 +-
> > arch/arm/mach-cns3xxx/include/mach/memory.h | 2 +-
> > arch/arm/mach-davinci/include/mach/memory.h | 4 ++--
> > arch/arm/mach-dove/include/mach/memory.h | 2 +-
> > arch/arm/mach-ebsa110/include/mach/memory.h | 2 +-
> > arch/arm/mach-ep93xx/include/mach/memory.h | 10 +++++-----
> > arch/arm/mach-footbridge/include/mach/memory.h | 2 +-
> > arch/arm/mach-h720x/include/mach/memory.h | 2 +-
> > arch/arm/mach-integrator/include/mach/memory.h | 2 +-
> > arch/arm/mach-iop13xx/include/mach/memory.h | 2 +-
> > arch/arm/mach-iop32x/include/mach/memory.h | 2 +-
> > arch/arm/mach-iop33x/include/mach/memory.h | 2 +-
> > arch/arm/mach-ixp2000/include/mach/memory.h | 2 +-
> > arch/arm/mach-ixp23xx/include/mach/memory.h | 2 +-
> > arch/arm/mach-ixp4xx/include/mach/memory.h | 2 +-
> > arch/arm/mach-kirkwood/include/mach/memory.h | 2 +-
> > arch/arm/mach-ks8695/include/mach/memory.h | 2 +-
> > arch/arm/mach-lh7a40x/include/mach/memory.h | 2 +-
> > arch/arm/mach-loki/include/mach/memory.h | 2 +-
> > arch/arm/mach-lpc32xx/include/mach/memory.h | 2 +-
> > arch/arm/mach-mmp/include/mach/memory.h | 2 +-
> > arch/arm/mach-msm/board-msm7x30.c | 2 +-
> > arch/arm/mach-msm/include/mach/memory.h | 10 +++++-----
> > arch/arm/mach-mv78xx0/include/mach/memory.h | 2 +-
> > arch/arm/mach-mx3/mach-kzm_arm11_01.c | 2 +-
> > arch/arm/mach-netx/include/mach/memory.h | 2 +-
> > arch/arm/mach-nomadik/include/mach/memory.h | 2 +-
> > arch/arm/mach-ns9xxx/include/mach/memory.h | 2 +-
> > arch/arm/mach-nuc93x/include/mach/memory.h | 2 +-
> > arch/arm/mach-orion5x/include/mach/memory.h | 2 +-
> > arch/arm/mach-pnx4008/include/mach/memory.h | 2 +-
> > arch/arm/mach-pxa/include/mach/memory.h | 2 +-
> > arch/arm/mach-realview/include/mach/memory.h | 4 ++--
> > arch/arm/mach-rpc/include/mach/memory.h | 2 +-
> > arch/arm/mach-s3c2400/include/mach/memory.h | 2 +-
> > arch/arm/mach-s3c2410/include/mach/memory.h | 2 +-
> > arch/arm/mach-s3c24a0/include/mach/memory.h | 2 +-
> > arch/arm/mach-s3c64xx/include/mach/memory.h | 2 +-
> > arch/arm/mach-s5p6442/include/mach/memory.h | 2 +-
> > arch/arm/mach-s5p64x0/include/mach/memory.h | 2 +-
> > arch/arm/mach-s5pc100/include/mach/memory.h | 2 +-
> > arch/arm/mach-s5pv210/include/mach/memory.h | 2 +-
> > arch/arm/mach-s5pv310/include/mach/memory.h | 2 +-
> > arch/arm/mach-sa1100/include/mach/memory.h | 2 +-
> > arch/arm/mach-shark/include/mach/memory.h | 2 +-
> > arch/arm/mach-shmobile/include/mach/memory.h | 2 +-
> > arch/arm/mach-tegra/include/mach/memory.h | 2 +-
> > arch/arm/mach-u300/include/mach/memory.h | 6 +++---
> > arch/arm/mach-u300/u300.c | 2 +-
> > arch/arm/mach-ux500/include/mach/memory.h | 2 +-
> > arch/arm/mach-versatile/include/mach/memory.h | 2 +-
> > arch/arm/mach-vexpress/include/mach/memory.h | 2 +-
> > arch/arm/mach-w90x900/include/mach/memory.h | 2 +-
> > arch/arm/plat-omap/include/plat/memory.h | 4 ++--
> > arch/arm/plat-spear/include/plat/memory.h | 2 +-
> > arch/arm/plat-stmp3xxx/include/mach/memory.h | 2 +-
> > arch/arm/plat-tcc/include/mach/memory.h | 2 +-
> > 63 files changed, 77 insertions(+), 75 deletions(-)
> You didn't touch arch/arm/plat-mxc/include/mach/memory.h which defines
> PHYS_OFFSET, too. I assume you just missed these?
Grr.
That's because it didn't match the '#define *PHYS_OFFSET' regexp I used
to find all the definitions. This is exactly why being different from
everyone else is a bad idea - you get missed.
next prev parent reply other threads:[~2011-01-05 0:04 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-04 20:20 [RFC 0/5] runtime P2V translations Russell King - ARM Linux
2011-01-04 20:22 ` [RFC 1/5] ARM: P2V: separate PHYS_OFFSET from platform definitions Russell King - ARM Linux
2011-01-04 21:10 ` Nicolas Pitre
2011-01-05 22:30 ` Russell King - ARM Linux
2011-01-04 21:23 ` Uwe Kleine-König
2011-01-05 0:04 ` Russell King - ARM Linux [this message]
2011-01-05 6:25 ` Uwe Kleine-König
2011-01-05 3:28 ` viresh kumar
2011-01-05 17:04 ` H Hartley Sweeten
2011-01-06 5:02 ` Magnus Damm
2011-02-07 15:57 ` Tony Lindgren
2011-02-07 16:36 ` Jean-Christophe PLAGNIOL-VILLARD
2011-02-08 11:22 ` Wan ZongShun
2011-02-17 5:33 ` Kukjin Kim
2011-02-17 15:16 ` Eric Miao
2011-02-17 18:07 ` JD (Jiandong) Zheng
2011-01-04 20:22 ` [RFC 2/5] ARM: P2V: avoid initializers and assembly using PHYS_OFFSET Russell King - ARM Linux
2011-01-04 21:12 ` Nicolas Pitre
2011-01-06 8:51 ` Sascha Hauer
2011-01-06 9:08 ` Russell King - ARM Linux
2011-02-07 15:59 ` Tony Lindgren
2011-02-07 16:51 ` Uwe Kleine-König
2011-02-07 16:52 ` Uwe Kleine-König
2011-02-17 5:36 ` Kukjin Kim
2011-02-17 14:11 ` Russell King - ARM Linux
2011-02-17 16:19 ` David Brown
2011-02-17 15:16 ` Eric Miao
2011-02-17 14:15 ` [RFC 0/5] runtime P2V translations Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110105000444.GA1085@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=STEricsson_nomadik_linux@list.st.com \
--cc=avorontsov@mvista.com \
--cc=ben-linux@fluff.org \
--cc=davidb@codeaurora.org \
--cc=elf@buici.com \
--cc=hjk@linutronix.de \
--cc=kernel@pengutronix.de \
--cc=kernel@wantstofly.org \
--cc=kgene.kim@samsung.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-omap@vger.kernel.o \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mcuos.com@gmail.com \
--cc=rubini@unipv.it \
--cc=ryan@bluewatersys.com \
--cc=sbranden@broadcom.com \
--cc=srinidhi.kasagar@stericsson.com \
--cc=support@simtec.co.uk \
--cc=tony@atomide.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=viresh.kumar@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).