linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Georgi Djakov <georgi.djakov@linaro.org>
Cc: agross@codeaurora.org, mturquette@baylibre.com,
	linux-clk@vger.kernel.org, bjorn.andersson@sonymobile.com,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v3 6/8] clk: qcom: Add RPM clock controller driver
Date: Tue, 27 Oct 2015 16:23:28 -0700	[thread overview]
Message-ID: <20151027232328.GT19782@codeaurora.org> (raw)
In-Reply-To: <1445360280-2347-7-git-send-email-georgi.djakov@linaro.org>

On 10/20, Georgi Djakov wrote:
> diff --git a/drivers/clk/qcom/rpmcc.c b/drivers/clk/qcom/rpmcc.c
> new file mode 100644
> index 000000000000..88283e2c95f7
> --- /dev/null
> +++ b/drivers/clk/qcom/rpmcc.c
> @@ -0,0 +1,198 @@
> +/*
> + * Copyright (c) 2015, Linaro Limited
> + * Copyright (c) 2014, The Linux Foundation. All rights reserved.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>

Is this include used?

> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/soc/qcom/smd-rpm.h>

Is this include used?

Add init.h for __init usage.

> +
> +#include "clk-smd-rpm.h"
> +#include <dt-bindings/clock/qcom,rpmcc-msm8916.h>
[..]
> +
> +static struct clk_smd_rpm *rpmcc_msm8916_clks[] = {

Can this be const?

> +	[RPM_XO_CLK_SRC] = &xo,
> +	[RPM_XO_A_CLK_SRC] = &xo_a,
> +	[RPM_PCNOC_CLK] = &pcnoc_clk,
> +	[RPM_PCNOC_A_CLK] = &pcnoc_a_clk,
[..]
> +
> +static int rpmcc_probe(struct platform_device *pdev)
> +{
> +	struct clk **clks;
> +	struct clk *clk;
> +	struct clk_smd_rpm **rpm_clks;
> +	struct rpm_cc *rcc;
> +	const struct rpmcc_desc *desc;
> +	struct qcom_smd_rpm *rpm;
> +	struct clk_onecell_data *data;
> +	int ret, i;
> +	size_t num_clks;
> +	const struct of_device_id *match;
> +
> +	rpm = dev_get_drvdata(pdev->dev.parent);
> +	if (!rpm) {
> +		dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
> +		return -ENODEV;
> +	}
> +
> +	match = of_match_device(rpmcc_match_table, &pdev->dev);

of_device_get_match_data() please

> +	if (!match)
> +		return -EINVAL;
> +
> +	desc = match->data;
> +	rpm_clks = desc->clks;
> +	num_clks = desc->num_clks;
> +
[..]
> +	}
> +
> +	ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
> +				  data);
> +	if (ret)
> +		return ret;
> +
> +	return clk_smd_rpm_enable_scaling(rpm);

We should unregister the provider if clk_smd_rpm_enable_scaling()
fails.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2015-10-27 23:23 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-20 16:57 [PATCH v3 0/8] Add initial support for RPM clocks Georgi Djakov
2015-10-20 16:57 ` [PATCH v3 1/8] arm64: dts: qcom: 8x16: Add fixed rate on-board oscillator Georgi Djakov
2015-10-22  2:52   ` Andy Gross
2015-10-27 23:17   ` Stephen Boyd
2015-10-20 16:57 ` [PATCH v3 2/8] clk: qcom: msm8916: Set the parent of xo to xo_board Georgi Djakov
2015-10-26 22:43   ` Stephen Boyd
2015-10-20 16:57 ` [PATCH v3 3/8] clk: qcom: msm8916: Ignore sleep_clk_src registration errors Georgi Djakov
2015-10-26 22:44   ` Stephen Boyd
2015-10-20 16:57 ` [PATCH v3 4/8] arm64: dts: qcom: 8x16: Add fixed rate sleep clock oscillator Georgi Djakov
2015-10-20 16:57 ` [PATCH v3 5/8] clk: qcom: Add support for RPM Clocks Georgi Djakov
2015-10-27 23:15   ` Stephen Boyd
2015-10-20 16:57 ` [PATCH v3 6/8] clk: qcom: Add RPM clock controller driver Georgi Djakov
2015-10-27 23:23   ` Stephen Boyd [this message]
2015-10-20 16:57 ` [PATCH v3 7/8] clk: qcom: msm8916: Use RPMCC if it is enabled Georgi Djakov
2015-10-20 16:58 ` [PATCH v3 8/8] clk: qcom: msm8916: Remove hard-coded sleep_clk_src Georgi Djakov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151027232328.GT19782@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=agross@codeaurora.org \
    --cc=bjorn.andersson@sonymobile.com \
    --cc=georgi.djakov@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).