Re: [RFC/PATCH 0/3] ARM: Use udiv/sdiv for __aeabi_{u}idiv library functions

[Russell King - ARM Linux <linux@arm.linux.org.uk>]

On Sun, Nov 22, 2015 at 08:25:27PM +0100, Arnd Bergmann wrote:
> The question is really about Marvell Dove, MMP and Armada 370,
> which are all based on PJ4 or PJ4B (CPU part : 0x581), so ARMv7-A
> and report idivt support but idiva.

Well, it's pretty hard to test when binutils blocks your ability to
write assembly using the instructions.

root@cubox:~# gcc -O2 -o idiv idiv.c -Wa,-mcpu='cortex-a9+idiv' -marm
/tmp/cc8WPQiB.s: Assembler messages:
/tmp/cc8WPQiB.s:32: Error: selected processor does not support ARM mode `udiv ip,r5,r4'
root@cubox:~# gcc -O2 -o idiv idiv.c -Wa,-mcpu='cortex-a9+idiv' -mthumb
/tmp/ccRzgAlM.s: Assembler messages:
/tmp/ccRzgAlM.s:36: Error: selected processor does not support Thumb mode `udiv r6,r5,r4'
root@cubox:~# gcc -O2 -o idiv idiv.c -Wa,-mcpu='marvell-pj4+idiv' -mthumb
/tmp/cc1JYyFD.s: Assembler messages:
/tmp/cc1JYyFD.s:36: Error: selected processor does not support Thumb mode `udiv r6,r5,r4'
root@cubox:~# gcc -O2 -o idiv idiv.c -Wa,-mcpu='marvell-pj4+idiv' -marm
/tmp/ccEQbQpp.s: Assembler messages:
/tmp/ccEQbQpp.s:32: Error: selected processor does not support ARM mode `udiv ip,r5,r4'

That's binutils 2.24 and gcc 4.8.4 as found on Ubuntu 14.04.  I'm
sorry, but I don't have spare time to work out what the opcodes
would be.

-- 
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.