linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Clark <robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
	Stanimir Varbanov
	<stanimir.varbanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH 1/9] firmware/qcom: add qcom_scm_restore_sec_cfg()
Date: Tue, 14 Mar 2017 11:18:03 -0400	[thread overview]
Message-ID: <20170314151811.17234-2-robdclark@gmail.com> (raw)
In-Reply-To: <20170314151811.17234-1-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Signed-off-by: Rob Clark <robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/firmware/qcom_scm-32.c |  6 ++++++
 drivers/firmware/qcom_scm-64.c | 16 ++++++++++++++++
 drivers/firmware/qcom_scm.c    |  6 ++++++
 drivers/firmware/qcom_scm.h    |  5 +++++
 include/linux/qcom_scm.h       |  2 ++
 5 files changed, 35 insertions(+)

diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 8ad226c..722e65a 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -578,3 +578,9 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
 
 	return ret ? : le32_to_cpu(scm_ret);
 }
+
+int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
+			       u32 spare)
+{
+	return -ENODEV;
+}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index c933259..550e3a3 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -381,3 +381,19 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
 
 	return ret ? : res.a1;
 }
+
+int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
+{
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+	int ret;
+
+	desc.args[0] = device_id;
+	desc.args[1] = spare;
+	desc.arginfo = QCOM_SCM_ARGS(2);
+
+	ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG,
+			    &desc, &res);
+
+	return ret ? : res.a1;
+}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index d987bcc..ae1f473 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -315,6 +315,12 @@ static const struct reset_control_ops qcom_scm_pas_reset_ops = {
 	.deassert = qcom_scm_pas_reset_deassert,
 };
 
+int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
+{
+	return __qcom_scm_restore_sec_cfg(__scm->dev, device_id, spare);
+}
+EXPORT_SYMBOL(qcom_scm_restore_sec_cfg);
+
 /**
  * qcom_scm_is_available() - Checks if SCM is available
  */
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 6a0f154..31fc732 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -85,4 +85,9 @@ static inline int qcom_scm_remap_error(int err)
 	return -EINVAL;
 }
 
+#define QCOM_SCM_SVC_MP			0xc
+#define QCOM_SCM_RESTORE_SEC_CFG	2
+extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
+				      u32 spare);
+
 #endif
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index d32f6f1..22017f5d 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -40,6 +40,7 @@ extern int qcom_scm_pas_shutdown(u32 peripheral);
 extern void qcom_scm_cpu_power_down(u32 flags);
 extern u32 qcom_scm_get_version(void);
 extern int qcom_scm_set_remote_state(u32 state, u32 id);
+extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
 #else
 static inline
 int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
@@ -67,5 +68,6 @@ static inline void qcom_scm_cpu_power_down(u32 flags) {}
 static inline u32 qcom_scm_get_version(void) { return 0; }
 static inline u32
 qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
+static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
 #endif
 #endif
-- 
2.9.3

  parent reply	other threads:[~2017-03-14 15:18 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-14 15:18 [PATCH 0/9] iommu: add qcom_iommu for early "B" family devices (v2) Rob Clark
     [not found] ` <20170314151811.17234-1-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-14 15:18   ` Rob Clark [this message]
2017-03-14 15:18   ` [PATCH 2/9] firmware: qcom_scm: add two scm calls for iommu secure page table Rob Clark
2017-03-14 15:18   ` [PATCH 3/9] Docs: dt: document qcom iommu bindings Rob Clark
     [not found]     ` <20170314151811.17234-4-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-23 22:21       ` Rob Herring
2017-03-24  2:45         ` Rob Clark
2017-03-27 19:10           ` Rob Herring
2017-03-14 15:18   ` [PATCH 4/9] iommu: arm-smmu: split out register defines Rob Clark
2017-03-14 15:18   ` [PATCH 5/9] iommu: add qcom_iommu Rob Clark
     [not found]     ` <20170314151811.17234-6-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-30  6:19       ` Archit Taneja
2017-03-30 13:46         ` Rob Clark
2017-03-31  4:19           ` Archit Taneja
2017-03-14 15:18 ` [PATCH 6/9] iommu: qcom: initialize secure page table Rob Clark
2017-03-14 15:18 ` [PATCH 7/9] ARM64: DT: add gpu for msm8916 Rob Clark
2017-03-14 15:18 ` [PATCH 8/9] ARM64: DT: add video codec devicetree node Rob Clark
2017-03-14 15:18 ` [PATCH 9/9] ARM64: DT: add iommu for msm8916 Rob Clark
  -- strict thread matches above, loose matches on Subject: below --
2017-03-01 17:42 [PATCH 0/9] iommu: add qcom_iommu for early "B" family devices Rob Clark
     [not found] ` <20170301174258.14618-1-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-01 17:42   ` [PATCH 1/9] firmware/qcom: add qcom_scm_restore_sec_cfg() Rob Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170314151811.17234-2-robdclark@gmail.com \
    --to=robdclark-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=stanimir.varbanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).