[PATCH 19/24] drm/msm/mdp5: Prepare Layer Mixers for source split

[Archit Taneja <architt@codeaurora.org>]

In order to enable Source Split in HW, we need to add/modify
a few LM register configurations:

- Configure the LM width to be half the mode width, so that
  each LM manages one half of the scanout.
- Tell the 'right' LM that it is configured to be the 'right'
  LM in source split mode.
- Since we now have 2 places where REG_MDP5_LM_BLEND_COLOR_OUT is
  configured, do a read-update-store for the register instead of
  directly writing a value to it.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 39 ++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
index 5bffef6ec9dc..4b3bc5fc1006 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
@@ -231,6 +231,7 @@ static void blend_setup(struct drm_crtc *crtc)
 	int i, plane_cnt = 0;
 	bool bg_alpha_enabled = false;
 	u32 mixer_op_mode = 0;
+	u32 val;
 #define blender(stage)	((stage) - STAGE0)
 
 	hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg);
@@ -330,10 +331,14 @@ static void blend_setup(struct drm_crtc *crtc)
 		}
 	}
 
-	mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(lm), mixer_op_mode);
-	if (r_mixer)
+	val = mdp5_read(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(lm));
+	mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(lm),
+		   val | mixer_op_mode);
+	if (r_mixer) {
+		val = mdp5_read(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(r_lm));
 		mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(r_lm),
-			   mixer_op_mode);
+			   val | mixer_op_mode);
+	}
 
 	mdp5_ctl_blend(ctl, pipeline, stage, r_stage, plane_cnt,
 		       ctl_blend_flags);
@@ -349,6 +354,7 @@ static void mdp5_crtc_mode_set_nofb(struct drm_crtc *crtc)
 	struct mdp5_hw_mixer *mixer = mdp5_cstate->pipeline.mixer;
 	struct mdp5_hw_mixer *r_mixer = mdp5_cstate->pipeline.r_mixer;
 	uint32_t lm = mixer->lm;
+	u32 mixer_width, val;
 	unsigned long flags;
 	struct drm_display_mode *mode;
 
@@ -366,14 +372,33 @@ static void mdp5_crtc_mode_set_nofb(struct drm_crtc *crtc)
 			mode->vsync_end, mode->vtotal,
 			mode->type, mode->flags);
 
+	mixer_width = mode->hdisplay;
+	if (r_mixer)
+		mixer_width /= 2;
+
 	spin_lock_irqsave(&mdp5_crtc->lm_lock, flags);
 	mdp5_write(mdp5_kms, REG_MDP5_LM_OUT_SIZE(lm),
-			MDP5_LM_OUT_SIZE_WIDTH(mode->hdisplay) |
+			MDP5_LM_OUT_SIZE_WIDTH(mixer_width) |
 			MDP5_LM_OUT_SIZE_HEIGHT(mode->vdisplay));
-	if (r_mixer)
-		mdp5_write(mdp5_kms, REG_MDP5_LM_OUT_SIZE(r_mixer->lm),
-			   MDP5_LM_OUT_SIZE_WIDTH(mode->hdisplay) |
+
+	/* Assign mixer to LEFT side in source split mode */
+	val = mdp5_read(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(lm));
+	val &= ~MDP5_LM_BLEND_COLOR_OUT_SPLIT_LEFT_RIGHT;
+	mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(lm), val);
+
+	if (r_mixer) {
+		u32 r_lm = r_mixer->lm;
+
+		mdp5_write(mdp5_kms, REG_MDP5_LM_OUT_SIZE(r_lm),
+			   MDP5_LM_OUT_SIZE_WIDTH(mixer_width) |
 			   MDP5_LM_OUT_SIZE_HEIGHT(mode->vdisplay));
+
+		/* Assign mixer to RIGHT side in source split mode */
+		val = mdp5_read(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(r_lm));
+		val |= MDP5_LM_BLEND_COLOR_OUT_SPLIT_LEFT_RIGHT;
+		mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(r_lm), val);
+	}
+
 	spin_unlock_irqrestore(&mdp5_crtc->lm_lock, flags);
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel