From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Andersson Subject: Re: [RESEND: PATCH v4 4/4] remoteproc: qcom: Add support for mss boot on msm8996 Date: Thu, 25 May 2017 23:09:28 -0700 Message-ID: <20170526060928.GH12920@tuxbook> References: <1494957722-13264-1-git-send-email-akdwived@codeaurora.org> <1494957722-13264-5-git-send-email-akdwived@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1494957722-13264-5-git-send-email-akdwived@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: Avaneesh Kumar Dwivedi Cc: sboyd@codeaurora.org, agross@codeaurora.org, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org On Tue 16 May 11:02 PDT 2017, Avaneesh Kumar Dwivedi wrote: > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt > index 92347fe..f9dfb6c 100644 > --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt > @@ -9,8 +9,8 @@ on the Qualcomm Hexagon core. > Definition: must be one of: > "qcom,q6v5-pil", > "qcom,msm8916-mss-pil", > - "qcom,msm8974-mss-pil" > - > + "qcom,msm8974-mss-pil", > + "qcom,msm8996-mss-pil" Indentation please. > - reg: > Usage: required > Value type: > diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c [..] > +/* QDSP6v56 parameters */ > +#define QDSP6v56_LDO_BYP BIT(25) > +#define QDSP6v56_BHS_ON BIT(24) > +#define QDSP6v56_CLAMP_WL BIT(21) > +#define QDSP6v56_CLAMP_QMC_MEM BIT(22) > +#define HALT_CHECK_MAX_LOOPS 200 > +#define QDSP6SS_XO_CBCR 0x0038 > +#define QDSP6SS_ACC_OVERRIDE_VAL 0x20 Please keep the blank line between the defines and the struct definition. > struct reg_info { > struct regulator *reg; > int uV; [..] > > +static const struct rproc_hexagon_res msm8996_mss = { > + .hexagon_mba_image = "mba.mbn", > + .proxy_supply = (struct qcom_mss_reg_res[]) { > + {} > + }, > + .active_supply = (struct qcom_mss_reg_res[]) { > + {}, > + {} > + }, It's possible to just leave .proxy_supply and .active_supply out (i.e. leaving them as NULL), as I made q6v5_regulator_init() handle this gracefully a while back. Regards, Bjorn