linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>,
	linux-clk@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 3/5 v2] clk: qcom: Implement RPM clocks for MSM8660/APQ8060
Date: Thu, 1 Jun 2017 00:58:38 -0700	[thread overview]
Message-ID: <20170601075838.GZ20170@codeaurora.org> (raw)
In-Reply-To: <20170419091326.11226-3-linus.walleij@linaro.org>

On 04/19, Linus Walleij wrote:
> diff --git a/drivers/clk/qcom/clk-rpm.c b/drivers/clk/qcom/clk-rpm.c
> index df3e5fe8442a..61c67e93bea3 100644
> --- a/drivers/clk/qcom/clk-rpm.c
> +++ b/drivers/clk/qcom/clk-rpm.c
> @@ -56,6 +56,30 @@
>  		},							      \
>  	}
>  
> +#define DEFINE_CLK_RPM_FIXED(_platform, _name, _active, r_id, r)	      \
> +	static struct clk_rpm _platform##_##_name = {			      \
> +		.rpm_clk_id = (r_id),					      \
> +		.rate = (r),						      \
> +		.hw.init = &(struct clk_init_data){			      \
> +			.ops = &clk_rpm_fixed_ops,			      \
> +			.name = #_name,					      \
> +			.parent_names = (const char *[]){ "pxo_board" },      \

Parent should be pxo, not pxo_board.

> +			.num_parents = 1,				      \
> +		},							      \
> +	};								      \
> +	static struct clk_rpm _platform##_##_active = {			      \
> +		.rpm_clk_id = (r_id),					      \
> +		.peer = &_platform##_##_name,				      \
> +		.active_only = true,					      \
> +		.rate = (r),						      \
> +		.hw.init = &(struct clk_init_data){			      \
> +			.ops = &clk_rpm_fixed_ops,			      \
> +			.name = #_active,				      \
> +			.parent_names = (const char *[]){ "pxo_board" },      \

ditto.

> +			.num_parents = 1,				      \
> +		},							      \
> +	}
> +
>  #define DEFINE_CLK_RPM_PXO_BRANCH(_platform, _name, _active, r_id, r)	      \
>  	static struct clk_rpm _platform##_##_active;			      \
>  	static struct clk_rpm _platform##_##_name = {			      \
> @@ -143,6 +167,13 @@ static int clk_rpm_handoff(struct clk_rpm *r)
>  	int ret;
>  	u32 value = INT_MAX;
>  
> +	/*
> +	 * The vendor tree simply reads the status for this
> +	 * RPM clock.
> +	 */
> +	if (r->rpm_clk_id == QCOM_RPM_PLL_4)
> +		return 0;
> +

I can't recall what that was all about. Handoff code came later
than when this PLL was supported, so perhaps we just missed
handoff here. Really it probably doesn't matter because sounds
aren't being played in the bootloader and/or the PLL isn't
enabled that early.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2017-06-01  7:58 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-19  9:13 [PATCH 1/5 v2] clk: qcom: Update DT bindings for the MSM8660/APQ8060 RPMCC Linus Walleij
2017-04-19  9:13 ` [PATCH 2/5 v2] clk: qcom: Elaborate on "active" clocks in the RPM clock bindings Linus Walleij
     [not found]   ` <20170419091326.11226-2-linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-04-28 13:35     ` Rob Herring
2017-06-01  7:39       ` Stephen Boyd
2017-04-19  9:13 ` [PATCH 3/5 v2] clk: qcom: Implement RPM clocks for MSM8660/APQ8060 Linus Walleij
2017-05-27 20:00   ` Bjorn Andersson
2017-06-01  8:05     ` Stephen Boyd
2017-10-13 11:50     ` Linus Walleij
2017-06-01  7:58   ` Stephen Boyd [this message]
2017-04-19  9:13 ` [PATCH 4/5 v2] clk: qcom: Update DT bindings for MSM8660 LCC Linus Walleij
2017-04-19  9:13 ` [PATCH 5/5 v2] clk: qcom: Add support " Linus Walleij
2017-05-27 20:19   ` Bjorn Andersson
2017-05-29 12:23     ` Linus Walleij
2017-05-30 19:24       ` Bjorn Andersson
2017-06-01  7:33         ` Stephen Boyd
2017-06-01  8:20   ` Stephen Boyd
2017-05-17  7:23 ` [PATCH 1/5 v2] clk: qcom: Update DT bindings for the MSM8660/APQ8060 RPMCC Linus Walleij
     [not found]   ` <CACRpkdbXEFeVkD8rETyrnuoAxUvnFt2BL07UsXuXfSnq3Qdyfw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-05-24  9:16     ` Linus Walleij
     [not found]       ` <CACRpkdYvwwJcxKPtKUyZBLWsmjXji7pHDKNz9NRTETqj2P3drQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-05-26 11:57         ` Peter De Schrijver
2017-06-01  7:38       ` Stephen Boyd
2017-06-09  8:48         ` Linus Walleij
     [not found] ` <20170419091326.11226-1-linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-06-01  7:48   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170601075838.GZ20170@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).