linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Clark <robdclark@gmail.com>
To: linux-arm-msm@vger.kernel.org
Cc: Stephen Boyd <sboyd@codeaurora.org>,
	Andy Gross <agross@codeaurora.org>,
	Stanimir Varbanov <stanimir.varbanov@linaro.org>,
	Rob Clark <robdclark@gmail.com>
Subject: [PATCH 3/3] ARM64: DT: add iommu for msm8916
Date: Mon, 12 Jun 2017 08:43:17 -0400	[thread overview]
Message-ID: <20170612124317.29313-3-robdclark@gmail.com> (raw)
In-Reply-To: <20170612124317.29313-1-robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 57 +++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 1dcd632..9a1d7ef 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -716,6 +716,59 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		apps_iommu: iommu@1ef0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x1e20000 0x40000>;
+			reg = <0x1ef0000 0x3000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <17>;
+
+			// mdp_0:
+			iommu-ctx@4000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			// venus_ns:
+			iommu-ctx@5000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x1f08000 0x10000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <18>;
+
+			// gfx3d_user:
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			// gfx3d_priv:
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 242 0>;
+			};
+		};
+
 		gpu@1c00000 {
 			compatible = "qcom,adreno-306.0", "qcom,adreno";
 			reg = <0x01c00000 0x20000>;
@@ -738,6 +791,7 @@
 			    <&gcc GFX3D_CLK_SRC>;
 			power-domains = <&gcc OXILI_GDSC>;
 			operating-points-v2 = <&gpu_opp_table>;
+			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
 		};
 
 		mdss: mdss@1a00000 {
@@ -781,6 +835,8 @@
 					      "core_clk",
 					      "vsync_clk";
 
+				iommus = <&apps_iommu 4>;
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -1231,6 +1287,7 @@
 				 <&gcc GCC_VENUS0_AHB_CLK>,
 				 <&gcc GCC_VENUS0_AXI_CLK>;
 			clock-names = "core", "iface", "bus";
+			iommus = <&apps_iommu 5>;
 			memory-region = <&venus_mem>;
 			status = "okay";
 
-- 
2.9.4

  parent reply	other threads:[~2017-06-12 12:43 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-12 12:43 [PATCH 1/3] ARM64: DT: add gpu for msm8916 Rob Clark
2017-06-12 12:43 ` [PATCH 2/3] ARM64: DT: add video codec devicetree node Rob Clark
2017-06-13  2:12   ` Stephen Boyd
2017-08-16 14:31   ` Stanimir Varbanov
2017-08-16 14:53     ` Andy Gross
2017-06-12 12:43 ` Rob Clark [this message]
2017-06-13  2:12   ` [PATCH 3/3] ARM64: DT: add iommu for msm8916 Stephen Boyd
2017-06-13  2:11 ` [PATCH 1/3] ARM64: DT: add gpu " Stephen Boyd
  -- strict thread matches above, loose matches on Subject: below --
2017-05-25 17:48 [PATCH 0/3] gpu + venus + iommu dt nodes " Rob Clark
2017-05-25 17:48 ` [PATCH 3/3] ARM64: DT: add iommu " Rob Clark
2017-05-31  0:14   ` Stephen Boyd
2017-05-31 11:58     ` Rob Clark
2017-05-31 16:14       ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170612124317.29313-3-robdclark@gmail.com \
    --to=robdclark@gmail.com \
    --cc=agross@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=stanimir.varbanov@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).