From mboxrd@z Thu Jan 1 00:00:00 1970 From: fenglinw@codeaurora.org Subject: [PATCH V1 0/3] Add LV/MV subtypes support for QCOM PMIC GPIOs Date: Tue, 13 Jun 2017 14:16:02 +0800 Message-ID: <20170613061707.13892-1-fenglinw@codeaurora.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org Cc: collinsd@quicinc.com, aghayal@qti.qualcomm.com, wruan@quicinc.com, kgunda@qti.qualcomm.com, Fenglin Wu List-Id: linux-arm-msm@vger.kernel.org From: Fenglin Wu LV (low voltage) and MV (medium voltage) subtype GPIO modules are support in QCOM PMICs like PMI8998, PM660. These modules support addtional features (func3, func4, analog-pass-through) and the register mappings are also different compared with legacy 4CH/8CH subtypes. These patches add the support for the new functions in LV/MV subtypes, and do some feature extension and bug fixing. Fenglin Wu (3): pinctrl: qcom: spmi-gpio: Add support for GPIO LV/MV subtype pinctrl: qcom: spmi-gpio: Add dtest route for digital input pinctrl: qcom: spmi-gpio: Correct power_source range check .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 43 ++- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 316 ++++++++++++++++++--- include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 15 + 3 files changed, 331 insertions(+), 43 deletions(-) -- Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.