From: Arnd Bergmann <arnd@arndb.de>
To: Rob Clark <robdclark@gmail.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Arnd Bergmann <arnd@arndb.de>, David Airlie <airlied@linux.ie>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
Archit Taneja <architt@codeaurora.org>,
Eric Anholt <eric@anholt.net>,
Sushmita Susheelendra <ssusheel@codeaurora.org>,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] drm/msm: gpu: call qcom_mdt interfaces only for ARCH_QCOM
Date: Tue, 20 Jun 2017 22:16:51 +0200 [thread overview]
Message-ID: <20170620201720.225593-2-arnd@arndb.de> (raw)
In-Reply-To: <20170620201720.225593-1-arnd@arndb.de>
When compile-testing for something other than ARCH_QCOM,
we run into a link error:
drivers/gpu/drm/msm/adreno/a5xx_gpu.o: In function `a5xx_hw_init':
a5xx_gpu.c:(.text.a5xx_hw_init+0x600): undefined reference to `qcom_mdt_get_size'
a5xx_gpu.c:(.text.a5xx_hw_init+0x93c): undefined reference to `qcom_mdt_load'
There is already an #ifdef that tries to check for CONFIG_QCOM_MDT_LOADER,
but that symbol is only meaningful when building for ARCH_QCOM.
This adds a compile-time check for ARCH_QCOM, and clarifies the
Kconfig select statement so we don't even try it for other targets.
The check for CONFIG_QCOM_MDT_LOADER can then go away, which also
improves compile-time coverage and makes the code a little nicer
to read.
Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/gpu/drm/msm/Kconfig | 2 +-
drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 11 +++--------
2 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index b638d192ce5e..99d39b2aefa6 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -5,7 +5,7 @@ config DRM_MSM
depends on ARCH_QCOM || (ARM && COMPILE_TEST)
depends on OF && COMMON_CLK
depends on MMU
- select QCOM_MDT_LOADER
+ select QCOM_MDT_LOADER if ARCH_QCOM
select REGULATOR
select DRM_KMS_HELPER
select DRM_PANEL
diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index eee9ac81aaa1..b719a5b5b88a 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -26,8 +26,6 @@ static void a5xx_dump(struct msm_gpu *gpu);
#define GPU_PAS_ID 13
-#if IS_ENABLED(CONFIG_QCOM_MDT_LOADER)
-
static int zap_shader_load_mdt(struct device *dev, const char *fwname)
{
const struct firmware *fw;
@@ -36,6 +34,9 @@ static int zap_shader_load_mdt(struct device *dev, const char *fwname)
void *mem_region = NULL;
int ret;
+ if (!IS_ENABLED(CONFIG_ARCH_QCOM))
+ return -EINVAL;
+
/* Request the MDT file for the firmware */
ret = request_firmware(&fw, fwname, dev);
if (ret) {
@@ -75,12 +76,6 @@ static int zap_shader_load_mdt(struct device *dev, const char *fwname)
return ret;
}
-#else
-static int zap_shader_load_mdt(struct device *dev, const char *fwname)
-{
- return -ENODEV;
-}
-#endif
static void a5xx_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit,
struct msm_file_private *ctx)
--
2.9.0
next prev parent reply other threads:[~2017-06-20 20:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-20 20:16 [PATCH 1/2] drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations Arnd Bergmann
2017-06-20 20:16 ` Arnd Bergmann [this message]
[not found] ` <20170620201720.225593-2-arnd-r2nGTMty4D4@public.gmane.org>
2017-06-21 14:58 ` [PATCH 2/2] drm/msm: gpu: call qcom_mdt interfaces only for ARCH_QCOM Jordan Crouse
2017-06-29 5:11 ` Bjorn Andersson
2017-06-21 14:53 ` [PATCH 1/2] drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations Jordan Crouse
[not found] ` <20170620201720.225593-1-arnd-r2nGTMty4D4@public.gmane.org>
2017-06-29 5:06 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170620201720.225593-2-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=airlied@linux.ie \
--cc=architt@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=freedreno@lists.freedesktop.org \
--cc=jcrouse@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=srinivas.kandagatla@linaro.org \
--cc=ssusheel@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox