From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>,
Arun Kumar Neelakantam <aneela@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] soc: qcom: smem: Support getting cached entries
Date: Wed, 4 Oct 2017 20:11:28 -0700 [thread overview]
Message-ID: <20171005031128.11658-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20171005031128.11658-1-bjorn.andersson@linaro.org>
On msm8996 cached SMEM items are used for storing the GLINK FIFOs, so
for items not found in the uncached list we need to also search the
cased list for these items.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- None
Changes since v1:
- phdr_to_first_cached_entry() endian conversion
- e->size is a le32, not le16
drivers/soc/qcom/smem.c | 69 +++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 61 insertions(+), 8 deletions(-)
diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
index b451dbc4aa39..c28275be0038 100644
--- a/drivers/soc/qcom/smem.c
+++ b/drivers/soc/qcom/smem.c
@@ -52,7 +52,8 @@
*
* Items in the non-cached region are allocated from the start of the partition
* while items in the cached region are allocated from the end. The free area
- * is hence the region between the cached and non-cached offsets.
+ * is hence the region between the cached and non-cached offsets. The header of
+ * cached items comes after the data.
*
*
* To synchronize allocations in the shared memory heaps a remote spinlock must
@@ -140,6 +141,7 @@ struct smem_header {
* @flags: flags for the partition (currently unused)
* @host0: first processor/host with access to this partition
* @host1: second processor/host with access to this partition
+ * @cacheline: alignment for "cached" entries
* @reserved: reserved entries for later use
*/
struct smem_ptable_entry {
@@ -148,7 +150,8 @@ struct smem_ptable_entry {
__le32 flags;
__le16 host0;
__le16 host1;
- __le32 reserved[8];
+ __le32 cacheline;
+ __le32 reserved[7];
};
/**
@@ -230,6 +233,7 @@ struct smem_region {
* @hwlock: reference to a hwspinlock
* @partitions: list of pointers to partitions affecting the current
* processor/host
+ * @cacheline: list of cacheline sizes for each host
* @num_regions: number of @regions
* @regions: list of the memory regions defining the shared memory
*/
@@ -239,6 +243,7 @@ struct qcom_smem {
struct hwspinlock *hwlock;
struct smem_partition_header *partitions[SMEM_HOST_COUNT];
+ size_t cacheline[SMEM_HOST_COUNT];
unsigned num_regions;
struct smem_region regions[0];
@@ -252,6 +257,14 @@ phdr_to_last_uncached_entry(struct smem_partition_header *phdr)
return p + le32_to_cpu(phdr->offset_free_uncached);
}
+static void *phdr_to_first_cached_entry(struct smem_partition_header *phdr,
+ size_t cacheline)
+{
+ void *p = phdr;
+
+ return p + le32_to_cpu(phdr->size) - ALIGN(sizeof(*phdr), cacheline);
+}
+
static void *phdr_to_last_cached_entry(struct smem_partition_header *phdr)
{
void *p = phdr;
@@ -276,6 +289,14 @@ uncached_entry_next(struct smem_private_entry *e)
le32_to_cpu(e->size);
}
+static struct smem_private_entry *
+cached_entry_next(struct smem_private_entry *e, size_t cacheline)
+{
+ void *p = e;
+
+ return p - le32_to_cpu(e->size) - ALIGN(sizeof(*e), cacheline);
+}
+
static void *uncached_entry_to_item(struct smem_private_entry *e)
{
void *p = e;
@@ -283,6 +304,13 @@ static void *uncached_entry_to_item(struct smem_private_entry *e)
return p + sizeof(*e) + le16_to_cpu(e->padding_hdr);
}
+static void *cached_entry_to_item(struct smem_private_entry *e)
+{
+ void *p = e;
+
+ return p - le32_to_cpu(e->size);
+}
+
/* Pointer to the one and only smem handle */
static struct qcom_smem *__smem;
@@ -458,18 +486,17 @@ static void *qcom_smem_get_private(struct qcom_smem *smem,
{
struct smem_partition_header *phdr;
struct smem_private_entry *e, *end;
+ size_t cacheline;
phdr = smem->partitions[host];
+ cacheline = smem->cacheline[host];
+
e = phdr_to_first_uncached_entry(phdr);
end = phdr_to_last_uncached_entry(phdr);
while (e < end) {
- if (e->canary != SMEM_PRIVATE_CANARY) {
- dev_err(smem->dev,
- "Found invalid canary in host %d partition\n",
- host);
- return ERR_PTR(-EINVAL);
- }
+ if (e->canary != SMEM_PRIVATE_CANARY)
+ goto invalid_canary;
if (le16_to_cpu(e->item) == item) {
if (size != NULL)
@@ -482,7 +509,32 @@ static void *qcom_smem_get_private(struct qcom_smem *smem,
e = uncached_entry_next(e);
}
+ /* Item was not found in the uncached list, search the cached list */
+
+ e = phdr_to_first_cached_entry(phdr, cacheline);
+ end = phdr_to_last_cached_entry(phdr);
+
+ while (e > end) {
+ if (e->canary != SMEM_PRIVATE_CANARY)
+ goto invalid_canary;
+
+ if (le16_to_cpu(e->item) == item) {
+ if (size != NULL)
+ *size = le32_to_cpu(e->size) -
+ le16_to_cpu(e->padding_data);
+
+ return cached_entry_to_item(e);
+ }
+
+ e = cached_entry_next(e, cacheline);
+ }
+
return ERR_PTR(-ENOENT);
+
+invalid_canary:
+ dev_err(smem->dev, "Found invalid canary in host %d partition\n", host);
+
+ return ERR_PTR(-EINVAL);
}
/**
@@ -659,6 +711,7 @@ static int qcom_smem_enumerate_partitions(struct qcom_smem *smem,
}
smem->partitions[remote_host] = header;
+ smem->cacheline[remote_host] = le32_to_cpu(entry->cacheline);
}
return 0;
--
2.12.0
next prev parent reply other threads:[~2017-10-05 3:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-05 3:11 [PATCH v3 0/2] Qualcomm SMEM cached item support Bjorn Andersson
2017-10-05 3:11 ` [PATCH v3 1/2] soc: qcom: smem: Rename "uncached" accessors Bjorn Andersson
2017-10-05 21:43 ` Stephen Boyd
2017-10-05 3:11 ` Bjorn Andersson [this message]
2017-10-05 21:43 ` [PATCH v3 2/2] soc: qcom: smem: Support getting cached entries Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171005031128.11658-3-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=andy.gross@linaro.org \
--cc=aneela@codeaurora.org \
--cc=david.brown@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).