[PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone

[Luca Weiss <luca@z3ntu.xyz>]

This DTS has support for the Fairphone 2 (codenamed FP2).
This first version of the DTS supports just the serial console via the MSM UART
pins.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 arch/arm/boot/dts/Makefile                         |  1 +
 arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts   | 22 ++++++++++++++++++++++
 3 files changed, 24 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 69183f0fbc78..d5e423cad16a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -113,6 +113,7 @@ everspin	Everspin Technologies, Inc.
 exar	Exar Corporation
 excito	Excito
 ezchip	EZchip Semiconductor
+fairphone	Fairphone B.V.
 faraday	Faraday Technology Corporation
 fcs	Fairchild Semiconductor
 firefly	Firefly
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faf46abaa4a2..549afb6ed13c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -700,6 +700,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
+	qcom-msm8974-fairphone-fp2.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb \
 	qcom-mdm9615-wp8548-mangoh-green.dtb
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
new file mode 100644
index 000000000000..79a5aa8b856a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -0,0 +1,22 @@
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+
+/ {
+	model = "Fairphone 2";
+	compatible = "fairphone,fp2", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&soc {
+	serial@f991e000 {
+		status = "ok";
+	};
+};
-- 
2.14.2