From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Luca Weiss <luca@z3ntu.xyz>
Cc: linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v2 3/5] ARM: dts: msm8974-FP2: Add regulator nodes for FP2
Date: Wed, 11 Oct 2017 10:20:02 -0700 [thread overview]
Message-ID: <20171011172002.GT1165@minitux> (raw)
In-Reply-To: <20171011110229.24413-3-luca@z3ntu.xyz>
On Wed 11 Oct 04:02 PDT 2017, Luca Weiss wrote:
> The voltages are pulled from the vendor source tree.
>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 195 +++++++++++++++++++++++
> 1 file changed, 195 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> index 9332c6e9c535..6dd553a61ae6 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> @@ -49,6 +49,201 @@
> debounce-interval = <15>;
> };
> };
> +
> + smd {
> + rpm {
> + rpm_requests {
> + pm8841-regulators {
> + s1 {
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s2 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + };
> + };
> +
> + pm8941-regulators {
> + vdd_l1_l3-supply = <&pm8941_s1>;
> + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
> + vdd_l4_l11-supply = <&pm8941_s1>;
> + vdd_l5_l7-supply = <&pm8941_s2>;
> + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
> + vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
> + vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
> + vdd_l21-supply = <&vreg_boost>;
> +
> + s1 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + s2 {
> + regulator-min-microvolt = <2150000>;
> + regulator-max-microvolt = <2150000>;
> +
> + regulator-boot-on;
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l1 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + l3 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l4 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-boot-on;
> + };
> +
> + l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-boot-on;
> + };
> +
> + l8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l10 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l11 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1350000>;
> + };
> +
> + l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l13 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l15 {
> + regulator-min-microvolt = <2050000>;
> + regulator-max-microvolt = <2050000>;
> + };
> +
> + l16 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +
> + l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l18 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l19 {
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <3350000>;
> + };
> +
> + l20 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l21 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l22 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l23 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + l24 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3075000>;
> +
> + regulator-boot-on;
> + };
> + };
> + };
> + };
> + };
> };
>
> &soc {
> --
> 2.14.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-10-11 17:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-11 11:02 [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Luca Weiss
2017-10-11 11:02 ` [PATCH v2 2/5] ARM: dts: msm8974-FP2: Introduce gpio-keys nodes Luca Weiss
2017-10-11 17:12 ` Bjorn Andersson
2017-10-11 11:02 ` [PATCH v2 3/5] ARM: dts: msm8974-FP2: Add regulator nodes for FP2 Luca Weiss
2017-10-11 17:20 ` Bjorn Andersson [this message]
2017-10-11 11:02 ` [PATCH v2 4/5] ARM: dts: msm8974-FP2: Add sdhci1 node Luca Weiss
2017-10-11 17:20 ` Bjorn Andersson
2017-10-11 11:02 ` [PATCH v2 5/5] ARM: dts: msm8974-FP2: Add USB node Luca Weiss
2017-10-11 17:21 ` Bjorn Andersson
2017-10-11 17:11 ` [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171011172002.GT1165@minitux \
--to=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=luca@z3ntu.xyz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).