From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Andersson Subject: Re: [PATCH] arm64: dts: qcom: Add SDM845 SMEM nodes Date: Wed, 25 Apr 2018 15:06:26 -0700 Message-ID: <20180425220626.GM2052@tuxbook-pro> References: <20180425144631.19731-1-sibis@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20180425144631.19731-1-sibis@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: Sibi Sankar Cc: andy.gross@linaro.org, david.brown@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, catalin.marinas@arm.com, will.deacon@arm.com, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-soc@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org On Wed 25 Apr 07:46 PDT 2018, Sibi Sankar wrote: > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 9be763da0664..bea985045759 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -21,6 +21,27 @@ > reg = <0 0x80000000 0 0>; > }; > > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + memory@85fc0000 { > + reg = <0 0x85fc0000 0 0x40000>; The region 0x85fe0000 + 0x20000 seems to be command db, which should be described on its own. So please reduce the size to 0x20000. > + no-map; > + }; > + > + smem_mem: smem-mem@86000000 { smem_mem: memory@86000000 ? > + reg = <0x0 0x86000000 0x0 0x200000>; > + no-map; > + }; > + > + memory@86000000 { memory@86200000 > + reg = <0 0x86200000 0 0x2d00000>; > + no-map; > + }; > + }; > + The rest looks good. Regards, Bjorn