From: Matthias Kaehlcke <mka@chromium.org>
To: Lina Iyer <ilina@codeaurora.org>
Cc: andy.gross@linaro.org, david.brown@linaro.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
rnayak@codeaurora.org, bjorn.andersson@linaro.org,
linux-kernel@vger.kernel.org, sboyd@kernel.org,
evgreen@chromium.org, dianders@chromium.org
Subject: Re: [PATCH v7 05/10] drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
Date: Thu, 3 May 2018 14:35:39 -0700 [thread overview]
Message-ID: <20180503213539.GA19594@google.com> (raw)
In-Reply-To: <20180502193749.31004-6-ilina@codeaurora.org>
Hi Lina,
On Wed, May 02, 2018 at 01:37:44PM -0600, Lina Iyer wrote:
> Sleep and wake requests are sent when the application processor
> subsystem of the SoC is entering deep sleep states like in suspend.
> These requests help lower the system power requirements when the
> resources are not in use.
>
> Sleep and wake requests are written to the TCS slots but are not
> triggered at the time of writing. The TCS are triggered by the firmware
> after the last of the CPUs has executed its WFI. Since these requests
> may come in different batches of requests, it is the job of this
> controller driver to find and arrange the requests into the available
> TCSes.
>
> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
> Reviewed-by: Evan Green <evgreen@chromium.org>
>
> ---
>
> Changes in v7:
> - Bug fix in find_match()
> ---
> drivers/soc/qcom/rpmh-internal.h | 8 +++
> drivers/soc/qcom/rpmh-rsc.c | 118 +++++++++++++++++++++++++++++++
> 2 files changed, 126 insertions(+)
>
> diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
> index d9a21726e568..6e19fe458c31 100644
> --- a/drivers/soc/qcom/rpmh-internal.h
> +++ b/drivers/soc/qcom/rpmh-internal.h
> @@ -14,6 +14,7 @@
> #define MAX_CMDS_PER_TCS 16
> #define MAX_TCS_PER_TYPE 3
> #define MAX_TCS_NR (MAX_TCS_PER_TYPE * TCS_TYPE_NR)
> +#define MAX_TCS_SLOTS (MAX_CMDS_PER_TCS * MAX_TCS_PER_TYPE)
> #define RPMH_MAX_CTRLR 2
>
> struct rsc_drv;
> @@ -30,6 +31,8 @@ struct rsc_drv;
> * @ncpt: number of commands in each TCS
> * @lock: lock for synchronizing this TCS writes
> * @req: requests that are sent from the TCS
> + * @cmd_cache: flattened cache of cmds in sleep/wake TCS
> + * @slots: indicates which of @cmd_addr are occupied
> */
> struct tcs_group {
> struct rsc_drv *drv;
> @@ -40,6 +43,8 @@ struct tcs_group {
> int ncpt;
> spinlock_t lock;
> const struct tcs_request *req[MAX_TCS_PER_TYPE];
> + u32 *cmd_cache;
> + DECLARE_BITMAP(slots, MAX_TCS_SLOTS);
> };
>
> /**
> @@ -69,6 +74,9 @@ struct rsc_drv {
> extern struct list_head rsc_drv_list;
>
> int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg);
> +int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv,
> + const struct tcs_request *msg);
> +int rpmh_rsc_invalidate(struct rsc_drv *drv);
>
> void rpmh_tx_done(const struct tcs_request *msg, int r);
>
> diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
> index 33270b1d5991..4e2144a14c31 100644
> --- a/drivers/soc/qcom/rpmh-rsc.c
> +++ b/drivers/soc/qcom/rpmh-rsc.c
> @@ -113,6 +113,12 @@ static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv,
> case RPMH_ACTIVE_ONLY_STATE:
> type = ACTIVE_TCS;
> break;
> + case RPMH_WAKE_ONLY_STATE:
> + type = WAKE_TCS;
> + break;
> + case RPMH_SLEEP_STATE:
> + type = SLEEP_TCS;
> + break;
> default:
> return ERR_PTR(-EINVAL);
> }
> @@ -353,6 +359,105 @@ int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg)
> }
> EXPORT_SYMBOL(rpmh_rsc_send_data);
>
> +static int find_match(const struct tcs_group *tcs, const struct tcs_cmd *cmd,
> + int len)
> +{
> + int i, j;
> +
> + /* Check for already cached commands */
> + for_each_set_bit(i, tcs->slots, MAX_TCS_SLOTS) {
> + if (tcs->cmd_cache[i] != cmd[0].addr)
> + continue;
> + for (j = 0; j < len; j++) {
> + if (tcs->cmd_cache[i + j] != cmd[j].addr) {
As mentioned in the review of v6, the code could read memory beyond
tcs->cmd_cache if 'i + len > ARRAY_SIZE(tcs->cmd_cache)'
> + WARN(1, "Message does not match previous sequence.\n");
> + return -EINVAL;
> + }
> + }
> + return i;
> + }
> +
> + return -ENODATA;
> +}
> +
> +static int find_slots(struct tcs_group *tcs, const struct tcs_request *msg,
> + int *tcs_id, int *cmd_id)
The change from m/n => tcs_id/cmd_id in v7 greatly improves
readability, thanks!
Matthias
PS: Please remember to include reviewers of earlier revisions to cc:
next prev parent reply other threads:[~2018-05-03 21:35 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-02 19:37 [PATCH v7 00/10] drivers/qcom: add RPMH communication support Lina Iyer
2018-05-02 19:37 ` [PATCH v7 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs Lina Iyer
2018-05-02 19:37 ` [PATCH v7 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs Lina Iyer
2018-05-02 20:37 ` Stephen Boyd
2018-05-02 19:37 ` [PATCH v7 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE Lina Iyer
2018-05-02 19:45 ` Steven Rostedt
2018-05-02 19:37 ` [PATCH v7 04/10] drivers: qcom: rpmh: add RPMH helper functions Lina Iyer
2018-05-03 20:26 ` Doug Anderson
2018-05-04 20:50 ` Matthias Kaehlcke
2018-05-08 16:05 ` ilina
2018-05-10 22:37 ` Doug Anderson
2018-05-11 15:06 ` Lina Iyer
2018-05-11 20:14 ` Doug Anderson
2018-05-14 15:00 ` Lina Iyer
2018-05-02 19:37 ` [PATCH v7 05/10] drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS Lina Iyer
2018-05-03 21:35 ` Matthias Kaehlcke [this message]
2018-05-08 16:16 ` ilina
2018-05-02 19:37 ` [PATCH v7 06/10] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS Lina Iyer
2018-05-03 22:06 ` Matthias Kaehlcke
2018-05-08 16:14 ` ilina
2018-05-08 17:25 ` Matthias Kaehlcke
2018-05-02 19:37 ` [PATCH v7 07/10] drivers: qcom: rpmh: cache sleep/wake state requests Lina Iyer
2018-05-04 21:39 ` Matthias Kaehlcke
2018-05-02 19:37 ` [PATCH v7 08/10] drivers: qcom: rpmh: allow requests to be sent asynchronously Lina Iyer
2018-05-02 19:37 ` [PATCH v7 09/10] drivers: qcom: rpmh: add support for batch RPMH request Lina Iyer
2018-05-02 19:37 ` [PATCH v7 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS Lina Iyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180503213539.GA19594@google.com \
--to=mka@chromium.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=ilina@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=rnayak@codeaurora.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).