Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Jordan Crouse <jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: Abhinav Kumar <abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	ryadav-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	nganji-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	chandanu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
Subject: Re: [DPU PATCH] drm/msm/dsi: add only dsi nodes with a valid device to list
Date: Mon, 18 Jun 2018 08:23:33 -0600	[thread overview]
Message-ID: <20180618142333.GA24526@jcrouse-lnx.qualcomm.com> (raw)
In-Reply-To: <1529129157-13754-1-git-send-email-abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

On Fri, Jun 15, 2018 at 11:05:57PM -0700, Abhinav Kumar wrote:
> Before adding a DSI node to the private list check if the
> node has a valid device connected to it through an endpoint.
> 
> This is required in cases where the chipset supports multiple
> DSI hosts but only one of them is being used.
> 
> In the current implementation even inactive nodes get added
> resulting in creation of redundant connectors.
> 
> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/dsi/dsi.c      |  6 +++++-
>  drivers/gpu/drm/msm/dsi/dsi.h      |  1 +
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 10 ++++++++++
>  3 files changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c
> index b744bcc..46a4906 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi.c
> @@ -120,7 +120,11 @@ static int dsi_bind(struct device *dev, struct device *master, void *data)
>  	if (IS_ERR(msm_dsi))
>  		return PTR_ERR(msm_dsi);
>  
> -	priv->dsi[msm_dsi->id] = msm_dsi;
> +	/* Add only the host which has a device attached to it */
> +	if (msm_dsi_has_valid_device(msm_dsi->host)) {
> +		pr_info("id = %d has valid device\n", msm_dsi->id);

This seems like a debug message that slipped through.

> +		priv->dsi[msm_dsi->id] = msm_dsi;
> +	}
>  
>  	return 0;
>  }
> diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
> index 70d9a9a..aa198ef 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi.h
> +++ b/drivers/gpu/drm/msm/dsi/dsi.h
> @@ -180,6 +180,7 @@ void msm_dsi_host_get_phy_clk_req(struct mipi_dsi_host *host,
>  int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
>  					struct drm_device *dev);
>  int msm_dsi_host_init(struct msm_dsi *msm_dsi);
> +bool msm_dsi_has_valid_device(struct mipi_dsi_host *host);
>  int msm_dsi_runtime_suspend(struct device *dev);
>  int msm_dsi_runtime_resume(struct device *dev);
>  
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 2f1a278..25d65e5 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -470,6 +470,16 @@ static void dsi_bus_clk_disable(struct msm_dsi_host *msm_host)
>  		clk_disable_unprepare(msm_host->bus_clks[i]);
>  }
>  
> +bool msm_dsi_has_valid_device(struct mipi_dsi_host *host)
> +{
> +	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
> +
> +	if (msm_host->device_node)
> +		return true;
> +
> +	return false;

Nit, return (msm_host->device_node) ? true : false; works just as well.

> +}
> +
>  int msm_dsi_runtime_suspend(struct device *dev)
>  {
>  	struct platform_device *pdev = to_platform_device(dev);

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

  parent reply	other threads:[~2018-06-18 14:23 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-16  6:05 [DPU PATCH] drm/msm/dsi: add only dsi nodes with a valid device to list Abhinav Kumar
     [not found] ` <1529129157-13754-1-git-send-email-abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-06-18 14:23   ` Jordan Crouse [this message]
2018-06-18 22:11     ` [Freedreno] " abhinavk
     [not found]       ` <495414ff4d9b852f26e3e5a7a2c72c4f-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-06-19 14:43         ` Jordan Crouse
2018-06-19 11:42   ` Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180618142333.GA24526@jcrouse-lnx.qualcomm.com \
    --to=jcrouse-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=chandanu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=nganji-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=ryadav-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox