From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: Re: [PATCH] arm64: dts: qcom: Add pmu node to sdm845
Date: Fri, 22 Jun 2018 09:56:34 -0700
Message-ID: <20180622165634.GB10336@builder>
References: <20180522062352.151257-1-swboyd@chromium.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20180522062352.151257-1-swboyd@chromium.org>
Sender: linux-kernel-owner@vger.kernel.org
To: Stephen Boyd <swboyd@chromium.org>
Cc: Andy Gross <andy.gross@linaro.org>, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
List-Id: linux-arm-msm@vger.kernel.org

On Mon 21 May 23:23 PDT 2018, Stephen Boyd wrote:

> Add the CPU PMU on sdm845 to get perf support for hardware events.
> 
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 7c85e7c596db..93a62c2be86c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -152,6 +152,11 @@
>  		};
>  	};
>  
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
>  	timer {
>  		compatible = "arm,armv8-timer";
>  		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
> -- 
> Sent by a computer through tubes
>