linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Douglas Anderson <dianders@chromium.org>
To: sboyd@kernel.org, andy.gross@linaro.org
Cc: tdas@codeaurora.org, girishm@codeaurora.org,
	linux-arm-msm@vger.kernel.org, anischal@codeaurora.org,
	bjorn.andersson@linaro.org, grahamr@codeaurora.org,
	linux-soc@vger.kernel.org, linux-clk@vger.kernel.org,
	Douglas Anderson <dianders@chromium.org>,
	Michael Turquette <mturquette@baylibre.com>,
	linux-kernel@vger.kernel.org,
	David Brown <david.brown@linaro.org>
Subject: [PATCH v3 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
Date: Tue, 24 Jul 2018 10:45:13 -0700	[thread overview]
Message-ID: <20180724174513.174018-3-dianders@chromium.org> (raw)
In-Reply-To: <20180724174513.174018-1-dianders@chromium.org>

Add both the interface and core clock.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
(am from https://lore.kernel.org/patchwork/patch/966680/mbox)

---

Changes in v3:
- Removed gcc_parent_names_9 which I had left in (doh!).

Changes in v2:
- Only 19.2, 100, 150, and 300 MHz now.
- All clocks come from MAIN rather than EVEN.
- Use parent map 0 instead of new parent map 9.

 drivers/clk/qcom/gcc-sdm845.c | 56 +++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index 0f694ed4238a..fc1c6658ad82 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -358,6 +358,28 @@ static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = {
 	},
 };
 
+static const struct freq_tbl ftbl_gcc_qspi_core_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+	F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_qspi_core_clk_src = {
+	.cmd_rcgr = 0x4b008,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qspi_core_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_qspi_core_clk_src",
+		.parent_names = gcc_parent_names_0,
+		.num_parents = 4,
+		.ops = &clk_rcg2_floor_ops,
+	},
+};
+
 static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = {
 	F(9600000, P_BI_TCXO, 2, 0, 0),
 	F(19200000, P_BI_TCXO, 1, 0, 0),
@@ -1935,6 +1957,37 @@ static struct clk_branch gcc_qmip_video_ahb_clk = {
 	},
 };
 
+static struct clk_branch gcc_qspi_cnoc_periph_ahb_clk = {
+	.halt_reg = 0x4b000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4b000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qspi_cnoc_periph_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qspi_core_clk = {
+	.halt_reg = 0x4b004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4b004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qspi_core_clk",
+			.parent_names = (const char *[]){
+				"gcc_qspi_core_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_qupv3_wrap0_s0_clk = {
 	.halt_reg = 0x17030,
 	.halt_check = BRANCH_HALT_VOTED,
@@ -3383,6 +3436,9 @@ static struct clk_regmap *gcc_sdm845_clocks[] = {
 	[GPLL4] = &gpll4.clkr,
 	[GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr,
 	[GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr,
+	[GCC_QSPI_CORE_CLK_SRC] = &gcc_qspi_core_clk_src.clkr,
+	[GCC_QSPI_CORE_CLK] = &gcc_qspi_core_clk.clkr,
+	[GCC_QSPI_CNOC_PERIPH_AHB_CLK] = &gcc_qspi_cnoc_periph_ahb_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_sdm845_resets[] = {
-- 
2.18.0.233.g985f88cf7e-goog

  parent reply	other threads:[~2018-07-24 17:45 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-24 17:45 [PATCH v3 0/2] clk: qcom: Quad SPI (qspi) clock support for sdm845 Douglas Anderson
2018-07-24 17:45 ` [PATCH v3 1/2] clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header Douglas Anderson
2018-07-25 16:01   ` Rob Herring
2018-08-10  8:08     ` Taniya Das
2018-08-28 22:58   ` Stephen Boyd
2018-07-24 17:45 ` Douglas Anderson [this message]
2018-07-24 18:24   ` [PATCH v3 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845 Doug Anderson
2018-08-10  8:09   ` Taniya Das
2018-08-28 22:58   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180724174513.174018-3-dianders@chromium.org \
    --to=dianders@chromium.org \
    --cc=andy.gross@linaro.org \
    --cc=anischal@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=girishm@codeaurora.org \
    --cc=grahamr@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    --cc=tdas@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).