Re: [PATCH v2 2/3] thermal: tsens: switch from of_iomap() to devm_ioremap_resource()

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Thu 26 Jul 03:33 PDT 2018, Amit Kucheria wrote:

> devm_ioremap_resources() automatically requests resources (so that the I/O
> region shows up in /proc/iomem) and devm_ wrappers do better error handling
> and unmapping of the I/O region when needed.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/thermal/qcom/tsens-common.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> index 25e7f247b027..6207d8d92351 100644
> --- a/drivers/thermal/qcom/tsens-common.c
> +++ b/drivers/thermal/qcom/tsens-common.c
> @@ -127,13 +127,11 @@ static const struct regmap_config tsens_config = {
>  int __init init_common(struct tsens_device *tmdev)
>  {
>  	void __iomem *base;
> +	struct resource *res;
>  	struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);
>  
>  	if (!op)
>  		return -EINVAL;
> -	base = of_iomap(tmdev->dev->of_node, 0);
> -	if (!base)
> -		return -EINVAL;
>  
>  	/* The driver only uses the TM register address space for now */
>  	if (op->num_resources > 1) {
> @@ -143,11 +141,14 @@ int __init init_common(struct tsens_device *tmdev)
>  		tmdev->tm_offset = 0x1000;
>  	}
>  
> +	res = platform_get_resource(op, IORESOURCE_MEM, 0);
> +	base = devm_ioremap_resource(&op->dev, res);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
>  	tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
> -	if (IS_ERR(tmdev->map)) {
> -		iounmap(base);
> +	if (IS_ERR(tmdev->map))
>  		return PTR_ERR(tmdev->map);
> -	}
>  
>  	return 0;
>  }
> -- 
> 2.17.GIT
>