From: Sravanthi Kollukuduru <skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org,
robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
Sravanthi Kollukuduru
<skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH v2 2/2] drm/msm/dpu: fix for cursor blend issue
Date: Wed, 22 Aug 2018 23:19:57 +0530 [thread overview]
Message-ID: <20180822174957.22684-3-skolluku@codeaurora.org> (raw)
In-Reply-To: <20180822174957.22684-1-skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
The current driver has the opaque blend mode set as the
default causing the black box effect around the cursor.
The fix enables choosing a different blend mode for alpha
enabled formats.
Changes in V2:
- Use drm_get_format_name() in the logs (Sean)
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 0cd9456a6c4c..07c2d15b45f2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -297,14 +297,29 @@ static void dpu_crtc_destroy(struct drm_crtc *crtc)
}
static void _dpu_crtc_setup_blend_cfg(struct dpu_crtc_mixer *mixer,
- struct dpu_plane_state *pstate)
+ struct dpu_plane_state *pstate, struct dpu_format *format)
{
struct dpu_hw_mixer *lm = mixer->hw_lm;
+ uint32_t blend_op;
+ struct drm_format_name_buf format_name;
/* default to opaque blending */
- lm->ops.setup_blend_config(lm, pstate->stage, 0XFF, 0,
- DPU_BLEND_FG_ALPHA_FG_CONST |
- DPU_BLEND_BG_ALPHA_BG_CONST);
+ blend_op = DPU_BLEND_FG_ALPHA_FG_CONST |
+ DPU_BLEND_BG_ALPHA_BG_CONST;
+
+ if (format->alpha_enable) {
+ /* coverage blending */
+ blend_op = DPU_BLEND_FG_ALPHA_FG_PIXEL |
+ DPU_BLEND_BG_ALPHA_FG_PIXEL |
+ DPU_BLEND_BG_INV_ALPHA;
+ }
+
+ lm->ops.setup_blend_config(lm, pstate->stage,
+ 0xFF, 0, blend_op);
+
+ DPU_DEBUG("format:%s, alpha_en:%u blend_op:0x%x\n",
+ drm_get_format_name(format->base.pixel_format, &format_name),
+ format->alpha_enable, blend_op);
}
static void _dpu_crtc_program_lm_output_roi(struct drm_crtc *crtc)
@@ -401,7 +416,8 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
/* blend config update */
for (lm_idx = 0; lm_idx < dpu_crtc->num_mixers; lm_idx++) {
- _dpu_crtc_setup_blend_cfg(mixer + lm_idx, pstate);
+ _dpu_crtc_setup_blend_cfg(mixer + lm_idx,
+ pstate, format);
mixer[lm_idx].flush_mask |= flush_mask;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
next prev parent reply other threads:[~2018-08-22 17:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-22 17:49 [PATCH v2 0/2] Enable cursor plane on DPU Sravanthi Kollukuduru
[not found] ` <20180822174957.22684-1-skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-22 17:49 ` [PATCH v2 1/2] drm/msm/dpu: enable cursor plane on dpu Sravanthi Kollukuduru
[not found] ` <20180822174957.22684-2-skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-22 19:10 ` Sean Paul
2018-08-22 17:49 ` Sravanthi Kollukuduru [this message]
[not found] ` <20180822174957.22684-3-skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-22 19:11 ` [PATCH v2 2/2] drm/msm/dpu: fix for cursor blend issue Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180822174957.22684-3-skolluku@codeaurora.org \
--to=skolluku-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org \
--cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).