From: Sean Paul <sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
To: Jordan Crouse <jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: [PATCH] drm/msm/dpu: Remove dpu_mdss_isr when dpu_mdss_destroy is called
Date: Fri, 31 Aug 2018 13:53:31 -0400 [thread overview]
Message-ID: <20180831175331.GR188300@art_vandelay> (raw)
In-Reply-To: <20180828212304.13193-1-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
On Tue, Aug 28, 2018 at 03:23:04PM -0600, Jordan Crouse wrote:
> The MDSS device is created before the MSM driver attempts to bind the
> sub components. If any of the components return -EPROBE_DEFER the MDSS
> device is destroyed and tried again later.
>
> If this happens the "dpu_mdss_isr" interrupt created from the DPU MDSS
> is not freed when the MDSS device is destroyed and has a risk of
> triggering later and hitting a fault by accessing a mmio region that
> no longer exists. Even if the interrupt isn't triggered by
> accident when the device attempts to reprobe it would error out
> when it tries to re-register the interrupt so unconditionally removing
> it in the destroy is the right move.
>
> Switch the device managed "dpu_mdss_isr" to be unmanaged and add a
> free_irq() in the mdss destroy function.
>
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> index 9e533b86682c..2235ef8129f4 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> @@ -158,6 +158,8 @@ static void dpu_mdss_destroy(struct drm_device *dev)
>
> _dpu_mdss_irq_domain_fini(dpu_mdss);
>
> + free_irq(platform_get_irq(pdev, 0), dpu_mdss);
> +
> msm_dss_put_clk(mp->clk_config, mp->num_clk);
> devm_kfree(&pdev->dev, mp->clk_config);
>
> @@ -215,7 +217,7 @@ int dpu_mdss_init(struct drm_device *dev)
> if (ret)
> goto irq_domain_error;
>
> - ret = devm_request_irq(dev->dev, platform_get_irq(pdev, 0),
> + ret = request_irq(platform_get_irq(pdev, 0),
> dpu_mdss_irq, 0, "dpu_mdss_isr", dpu_mdss);
> if (ret) {
> DPU_ERROR("failed to init irq: %d\n", ret);
> --
> 2.18.0
>
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
prev parent reply other threads:[~2018-08-31 17:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-28 21:23 [PATCH] drm/msm/dpu: Remove dpu_mdss_isr when dpu_mdss_destroy is called Jordan Crouse
[not found] ` <20180828212304.13193-1-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-31 17:53 ` Sean Paul [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180831175331.GR188300@art_vandelay \
--to=sean-p7ytbzm4h96eqtr555yldq@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox