[PATCH 1/6] drm/msm: Remove dpu_encoder_phys_ops->hw_reset()

[Sean Paul <sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>]

From: Sean Paul <seanpaul@chromium.org>

We call out of the virt encoder into phys only to call back into the
virt for hw reset. So remove the indirection and just call the virt
function directly.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c          |  6 ++----
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 12 ------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  1 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c |  1 -
 4 files changed, 2 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 8f6880db5c99..7842b66fbe2e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1509,7 +1509,7 @@ static int dpu_encoder_helper_wait_event_timeout(
 	return rc;
 }
 
-void dpu_encoder_helper_hw_reset(struct dpu_encoder_phys *phys_enc)
+static void dpu_encoder_helper_hw_reset(struct dpu_encoder_phys *phys_enc)
 {
 	struct dpu_encoder_virt *dpu_enc;
 	struct dpu_hw_ctl *ctl;
@@ -1805,9 +1805,7 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc,
 	if (needs_hw_reset) {
 		trace_dpu_enc_prepare_kickoff_reset(DRMID(drm_enc));
 		for (i = 0; i < dpu_enc->num_phys_encs; i++) {
-			phys = dpu_enc->phys_encs[i];
-			if (phys && phys->ops.hw_reset)
-				phys->ops.hw_reset(phys);
+			dpu_encoder_helper_hw_reset(dpu_enc->phys_encs[i]);
 		}
 	}
 }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
index 964efcc757a4..3a67bb9f9d9d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
@@ -114,8 +114,6 @@ struct dpu_encoder_virt_ops {
  * @handle_post_kickoff:	Do any work necessary post-kickoff work
  * @trigger_start:		Process start event on physical encoder
  * @needs_single_flush:		Whether encoder slaves need to be flushed
- * @hw_reset:			Issue HW recovery such as CTL reset and clear
- *				DPU_ENC_ERR_NEEDS_HW_RESET state
  * @irq_control:		Handler to enable/disable all the encoder IRQs
  * @prepare_idle_pc:		phys encoder can update the vsync_enable status
  *                              on idle power collapse prepare
@@ -151,7 +149,6 @@ struct dpu_encoder_phys_ops {
 	void (*handle_post_kickoff)(struct dpu_encoder_phys *phys_enc);
 	void (*trigger_start)(struct dpu_encoder_phys *phys_enc);
 	bool (*needs_single_flush)(struct dpu_encoder_phys *phys_enc);
-	void (*hw_reset)(struct dpu_encoder_phys *phys_enc);
 	void (*irq_control)(struct dpu_encoder_phys *phys, bool enable);
 	void (*prepare_idle_pc)(struct dpu_encoder_phys *phys_enc);
 	void (*restore)(struct dpu_encoder_phys *phys);
@@ -342,15 +339,6 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
  */
 void dpu_encoder_helper_trigger_start(struct dpu_encoder_phys *phys_enc);
 
-/**
- * dpu_encoder_helper_hw_reset - issue ctl hw reset
- *	This helper function may be optionally specified by physical
- *	encoders if they require ctl hw reset. If state is currently
- *	DPU_ENC_ERR_NEEDS_HW_RESET, it is set back to DPU_ENC_ENABLED.
- * @phys_enc: Pointer to physical encoder structure
- */
-void dpu_encoder_helper_hw_reset(struct dpu_encoder_phys *phys_enc);
-
 static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
 		struct dpu_encoder_phys *phys_enc)
 {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index b2d7f0ded24c..c30ae05b3349 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -776,7 +776,6 @@ static void dpu_encoder_phys_cmd_init_ops(
 	ops->wait_for_vblank = dpu_encoder_phys_cmd_wait_for_vblank;
 	ops->trigger_start = dpu_encoder_phys_cmd_trigger_start;
 	ops->needs_single_flush = dpu_encoder_phys_cmd_needs_single_flush;
-	ops->hw_reset = dpu_encoder_helper_hw_reset;
 	ops->irq_control = dpu_encoder_phys_cmd_irq_control;
 	ops->restore = dpu_encoder_phys_cmd_enable_helper;
 	ops->prepare_idle_pc = dpu_encoder_phys_cmd_prepare_idle_pc;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index 84de385a9f62..283a2491f3e3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -766,7 +766,6 @@ static void dpu_encoder_phys_vid_init_ops(struct dpu_encoder_phys_ops *ops)
 	ops->prepare_for_kickoff = dpu_encoder_phys_vid_prepare_for_kickoff;
 	ops->handle_post_kickoff = dpu_encoder_phys_vid_handle_post_kickoff;
 	ops->needs_single_flush = dpu_encoder_phys_vid_needs_single_flush;
-	ops->hw_reset = dpu_encoder_helper_hw_reset;
 	ops->get_line_count = dpu_encoder_phys_vid_get_line_count;
 }
 
-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno