From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Andersson Subject: [PATCH v4 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes Date: Tue, 29 Jan 2019 15:20:02 -0800 Message-ID: <20190129232009.5033-4-bjorn.andersson@linaro.org> References: <20190129232009.5033-1-bjorn.andersson@linaro.org> Return-path: In-Reply-To: <20190129232009.5033-1-bjorn.andersson@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Andy Gross , David Brown Cc: Rob Herring , Mark Rutland , Ohad Ben-Cohen , Arun Kumar Neelakantam , Sibi Sankar , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org Add the Audio DSP (ADSP) and Compute DSP (CDSP) nodes for TrustZone based remoteproc, supporting booting these cores on e.g. the MTP, and enable the same for the MTP. Signed-off-by: Bjorn Andersson --- Changes since v3: - Make xo reference the actual CXO clock arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 8 ++++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 +++++++++++++++++++++++++ 2 files changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index af8c6a2445a2..02b8357c8ce8 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -48,6 +48,10 @@ }; }; +&adsp_pas { + status = "okay"; +}; + &apps_rsc { pm8998-rpmh-regulators { compatible = "qcom,pm8998-rpmh-regulators"; @@ -344,6 +348,10 @@ }; }; +&cdsp_pas { + status = "okay"; +}; + &gcc { protected-clocks = , , diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index afaffcc1e835..d193f85e5835 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -330,6 +330,64 @@ }; }; + adsp_pas: remoteproc-adsp { + compatible = "qcom,sdm845-adsp-pas"; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + }; + }; + + cdsp_pas: remoteproc-cdsp { + compatible = "qcom,sdm845-cdsp-pas"; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + memory-region = <&cdsp_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "turing"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + }; + }; + tcsr_mutex: hwlock { compatible = "qcom,tcsr-mutex"; syscon = <&tcsr_mutex_regs 0 0x1000>; -- 2.18.0