Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Stanimir Varbanov <svarbanov@mm-sol.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-pci@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 081/167] PCI: qcom: Fix error handling in runtime PM support
Date: Tue,  3 Sep 2019 12:23:53 -0400	[thread overview]
Message-ID: <20190903162519.7136-81-sashal@kernel.org> (raw)
In-Reply-To: <20190903162519.7136-1-sashal@kernel.org>

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 6e5da6f7d82474e94c2d4a38cf9ca4edbb3e03a0 ]

The driver does not cope with the fact that probe can fail in a number
of cases after enabling runtime PM on the device; this results in
warnings about "Unbalanced pm_runtime_enable". Furthermore if probe
fails after invoking qcom_pcie_host_init() the power-domain will be left
referenced.

As it is not possible for the error handling in qcom_pcie_host_init() to
handle errors happening after returning from that function the
pm_runtime_get_sync() is moved to qcom_pcie_probe() as well.

Fixes: 854b69efbdd2 ("PCI: qcom: add runtime pm support to pcie_port")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 56 ++++++++++++++++++--------
 1 file changed, 39 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 87a8887fd4d3e..79f06c76ae071 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1091,7 +1091,6 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 	struct qcom_pcie *pcie = to_qcom_pcie(pci);
 	int ret;
 
-	pm_runtime_get_sync(pci->dev);
 	qcom_ep_reset_assert(pcie);
 
 	ret = pcie->ops->init(pcie);
@@ -1128,7 +1127,6 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 	phy_power_off(pcie->phy);
 err_deinit:
 	pcie->ops->deinit(pcie);
-	pm_runtime_put(pci->dev);
 
 	return ret;
 }
@@ -1218,6 +1216,12 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_disable(dev);
+		return ret;
+	}
+
 	pci->dev = dev;
 	pci->ops = &dw_pcie_ops;
 	pp = &pci->pp;
@@ -1227,44 +1231,56 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	pcie->ops = of_device_get_match_data(dev);
 
 	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW);
-	if (IS_ERR(pcie->reset))
-		return PTR_ERR(pcie->reset);
+	if (IS_ERR(pcie->reset)) {
+		ret = PTR_ERR(pcie->reset);
+		goto err_pm_runtime_put;
+	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
 	pcie->parf = devm_ioremap_resource(dev, res);
-	if (IS_ERR(pcie->parf))
-		return PTR_ERR(pcie->parf);
+	if (IS_ERR(pcie->parf)) {
+		ret = PTR_ERR(pcie->parf);
+		goto err_pm_runtime_put;
+	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
 	pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
-	if (IS_ERR(pci->dbi_base))
-		return PTR_ERR(pci->dbi_base);
+	if (IS_ERR(pci->dbi_base)) {
+		ret = PTR_ERR(pci->dbi_base);
+		goto err_pm_runtime_put;
+	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
 	pcie->elbi = devm_ioremap_resource(dev, res);
-	if (IS_ERR(pcie->elbi))
-		return PTR_ERR(pcie->elbi);
+	if (IS_ERR(pcie->elbi)) {
+		ret = PTR_ERR(pcie->elbi);
+		goto err_pm_runtime_put;
+	}
 
 	pcie->phy = devm_phy_optional_get(dev, "pciephy");
-	if (IS_ERR(pcie->phy))
-		return PTR_ERR(pcie->phy);
+	if (IS_ERR(pcie->phy)) {
+		ret = PTR_ERR(pcie->phy);
+		goto err_pm_runtime_put;
+	}
 
 	ret = pcie->ops->get_resources(pcie);
 	if (ret)
-		return ret;
+		goto err_pm_runtime_put;
 
 	pp->ops = &qcom_pcie_dw_ops;
 
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
-		if (pp->msi_irq < 0)
-			return pp->msi_irq;
+		if (pp->msi_irq < 0) {
+			ret = pp->msi_irq;
+			goto err_pm_runtime_put;
+		}
 	}
 
 	ret = phy_init(pcie->phy);
 	if (ret) {
 		pm_runtime_disable(&pdev->dev);
-		return ret;
+		goto err_pm_runtime_put;
 	}
 
 	platform_set_drvdata(pdev, pcie);
@@ -1273,10 +1289,16 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(dev, "cannot initialize host\n");
 		pm_runtime_disable(&pdev->dev);
-		return ret;
+		goto err_pm_runtime_put;
 	}
 
 	return 0;
+
+err_pm_runtime_put:
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+
+	return ret;
 }
 
 static const struct of_device_id qcom_pcie_match[] = {
-- 
2.20.1


  parent reply	other threads:[~2019-09-03 16:35 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190903162519.7136-1-sashal@kernel.org>
2019-09-03 16:22 ` [PATCH AUTOSEL 4.19 008/167] remoteproc: qcom: q6v5-mss: add SCM probe dependency Sasha Levin
2019-09-03 16:23 ` Sasha Levin [this message]
2019-09-03 16:23 ` [PATCH AUTOSEL 4.19 082/167] PCI: qcom: Don't deassert reset GPIO during probe Sasha Levin
2019-09-03 16:24 ` [PATCH AUTOSEL 4.19 098/167] ARM: dts: qcom: ipq4019: fix PCI range Sasha Levin
2019-09-03 16:24 ` [PATCH AUTOSEL 4.19 099/167] ARM: dts: qcom: ipq4019: Fix MSI IRQ type Sasha Levin
2019-09-03 16:24 ` [PATCH AUTOSEL 4.19 100/167] ARM: dts: qcom: ipq4019: enlarge PCIe BAR range Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190903162519.7136-81-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=stable@vger.kernel.org \
    --cc=svarbanov@mm-sol.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox