From: kholk11@gmail.com
To: linux-arm-msm@vger.kernel.org
Cc: kholk11@gmail.com, marijns95@gmail.com, broonie@kernel.org,
lgirdwood@gmail.com, mark.rutland@arm.com, robh+dt@kernel.org,
lee.jones@linaro.org, agross@kernel.org
Subject: [PATCH 3/5] regulator: qcom_smd: Add PM8950 regulators
Date: Sat, 21 Sep 2019 11:50:41 +0200 [thread overview]
Message-ID: <20190921095043.62593-4-kholk11@gmail.com> (raw)
In-Reply-To: <20190921095043.62593-1-kholk11@gmail.com>
From: "Angelo G. Del Regno" <kholk11@gmail.com>
The PM8950 provides 6 SMPS regulators, of which 5 HFSMPS
and one FTSMPS2.5 (s5), and 23 LDOs.
Add these to the RPM regulator driver.
Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com>
---
.../regulator/qcom,smd-rpm-regulator.txt | 21 +++++
drivers/regulator/qcom_smd-regulator.c | 92 +++++++++++++++++++
2 files changed, 113 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
index 45025b5b67f6..d126df043403 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
@@ -22,6 +22,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8841-regulators"
"qcom,rpm-pm8916-regulators"
"qcom,rpm-pm8941-regulators"
+ "qcom,rpm-pm8950-regulators"
"qcom,rpm-pm8994-regulators"
"qcom,rpm-pm8998-regulators"
"qcom,rpm-pma8084-regulators"
@@ -54,6 +55,26 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_l1_l19-supply:
+- vdd_l2_l23-supply:
+- vdd_l3-supply:
+- vdd_l4_l5_l6_l7_l16-supply:
+- vdd_l8_l11_l12_l17_l22-supply:
+- vdd_l9_l10_l13_l14_l15_l18-supply:
+- vdd_l20-supply:
+- vdd_l21-supply:
+ Usage: optional (pm8950 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
- vdd_s1-supply:
- vdd_s2-supply:
- vdd_s3-supply:
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 3b0828c79e2b..fff8d5fdef6a 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -338,6 +338,63 @@ static const struct regulator_desc pm8916_buck_hvo_smps = {
.ops = &rpm_smps_ldo_ops,
};
+static const struct regulator_desc pm8950_hfsmps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500),
+ REGULATOR_LINEAR_RANGE(1550000, 96, 127, 25000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 128,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8950_ftsmps2p5 = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(80000, 0, 255, 5000),
+ REGULATOR_LINEAR_RANGE(160000, 256, 460, 10000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 461,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8950_ult_nldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(375000, 0, 202, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 203,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8950_ult_pldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(1750000, 0, 127, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 128,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8950_pldo_lv = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(1500000, 0, 16, 25000),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 17,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8950_pldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(975000, 0, 164, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 165,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+
static const struct regulator_desc pm8994_hfsmps = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500),
@@ -638,6 +695,40 @@ static const struct rpm_regulator_data rpm_pma8084_regulators[] = {
{}
};
+static const struct rpm_regulator_data rpm_pm8950_regulators[] = {
+ { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8950_hfsmps, "vdd_s1" },
+ { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8950_hfsmps, "vdd_s2" },
+ { "s3", QCOM_SMD_RPM_SMPA, 3, &pm8950_hfsmps, "vdd_s3" },
+ { "s4", QCOM_SMD_RPM_SMPA, 4, &pm8950_hfsmps, "vdd_s4" },
+ { "s5", QCOM_SMD_RPM_SMPA, 5, &pm8950_ftsmps2p5, "vdd_s5" },
+ { "s6", QCOM_SMD_RPM_SMPA, 6, &pm8950_hfsmps, "vdd_s6" },
+
+ { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8950_ult_nldo, "vdd_l1_l19" },
+ { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8950_ult_nldo, "vdd_l2_l23" },
+ { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8950_ult_nldo, "vdd_l3" },
+ { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8950_ult_pldo, "vdd_l4_l5_l6_l7_l16" },
+ { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8950_pldo_lv, "vdd_l4_l5_l6_l7_l16" },
+ { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8950_pldo_lv, "vdd_l4_l5_l6_l7_l16" },
+ { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8950_pldo_lv, "vdd_l4_l5_l6_l7_l16" },
+ { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8950_ult_pldo, "vdd_l8_l11_l12_l17_l22" },
+ { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8950_ult_pldo, "vdd_l9_l10_l13_l14_l15_l18" },
+ { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8950_ult_nldo, "vdd_l9_l10_l13_l14_l15_l18"},
+ { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8950_ult_pldo, "vdd_l8_l11_l12_l17_l22"},
+ { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8950_ult_pldo, "vdd_l8_l11_l12_l17_l22"},
+ { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8950_ult_pldo, "vdd_l9_l10_l13_l14_l15_l18"},
+ { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8950_ult_pldo, "vdd_l9_l10_l13_l14_l15_l18"},
+ { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8950_ult_pldo, "vdd_l9_l10_l13_l14_l15_l18"},
+ { "l16", QCOM_SMD_RPM_LDOA, 16, &pm8950_ult_pldo, "vdd_l4_l5_l6_l7_l16"},
+ { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8950_ult_pldo, "vdd_l8_l11_l12_l17_l22"},
+ { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8950_ult_pldo, "vdd_l9_l10_l13_l14_l15_l18"},
+ { "l19", QCOM_SMD_RPM_LDOA, 18, &pm8950_pldo, "vdd_l1_l19"},
+ { "l20", QCOM_SMD_RPM_LDOA, 18, &pm8950_pldo, "vdd_l20"},
+ { "l21", QCOM_SMD_RPM_LDOA, 18, &pm8950_pldo, "vdd_l21"},
+ { "l22", QCOM_SMD_RPM_LDOA, 18, &pm8950_pldo, "vdd_l8_l11_l12_l17_l22"},
+ { "l23", QCOM_SMD_RPM_LDOA, 18, &pm8950_pldo, "vdd_l2_l23"},
+ {}
+};
+
static const struct rpm_regulator_data rpm_pm8994_regulators[] = {
{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8994_ftsmps, "vdd_s1" },
{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8994_ftsmps, "vdd_s2" },
@@ -767,6 +858,7 @@ static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
+ { .compatible = "qcom,rpm-pm8950-regulators", .data = &rpm_pm8950_regulators },
{ .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators },
{ .compatible = "qcom,rpm-pm8998-regulators", .data = &rpm_pm8998_regulators },
{ .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators },
--
2.21.0
next prev parent reply other threads:[~2019-09-21 9:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-21 9:50 [PATCH 0/5] Add support for PM8950/PMI8950/PM8004 regulators kholk11
2019-09-21 9:50 ` [PATCH 1/5] qcom: spmi-regulator: Add support for ULT LV_P50 and ULT P300 kholk11
2019-09-21 9:50 ` [PATCH 2/5] regulator: qcom_spmi: Add PM8950 SPMI regulator kholk11
2019-09-21 9:50 ` kholk11 [this message]
2019-09-21 9:50 ` [PATCH 4/5] mfd: qcom-spmi-pmic: Add support for PM/PMI8950 kholk11
2019-10-04 14:27 ` Lee Jones
2019-09-21 9:50 ` [PATCH 5/5] regulator: qcom_spmi: Add support for PM8004 regulators kholk11
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190921095043.62593-4-kholk11@gmail.com \
--to=kholk11@gmail.com \
--cc=agross@kernel.org \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=marijns95@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox