From: kholk11@gmail.com
To: linux-arm-msm@vger.kernel.org
Cc: kholk11@gmail.com, marijns95@gmail.com, robdclark@gmail.com,
sean@poorly.run, airlied@linux.ie, daniel@ffwll.ch,
robh+dt@kernel.org, mark.rutland@arm.com, tglx@linutronix.de,
jonathan@marek.ca, bjorn.andersson@linaro.org,
georgi.djakov@linaro.org, gregkh@linuxfoundation.org,
dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org
Subject: [PATCH v2 3/5] drm/msm/dsi: Add configuration for 28nm PLL on family B
Date: Thu, 26 Sep 2019 12:52:54 +0200 [thread overview]
Message-ID: <20190926105256.61412-4-kholk11@gmail.com> (raw)
In-Reply-To: <20190926105256.61412-1-kholk11@gmail.com>
From: "Angelo G. Del Regno" <kholk11@gmail.com>
The 28nm PLL has a different iospace on MSM/APQ family B SoCs:
add a new configuration and use it when the DT reports the
"qcom,dsi-phy-28nm-hpm-fam-b" compatible.
Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com>
---
.../devicetree/bindings/display/msm/dsi.txt | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 ++
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 18 ++++++++++++++++++
4 files changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index af95586c898f..d3ba9ee22f38 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -83,6 +83,7 @@ DSI PHY:
Required properties:
- compatible: Could be the following
* "qcom,dsi-phy-28nm-hpm"
+ * "qcom,dsi-phy-28nm-hpm-fam-b"
* "qcom,dsi-phy-28nm-lp"
* "qcom,dsi-phy-20nm"
* "qcom,dsi-phy-28nm-8960"
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 4097eca1b3ef..507c0146a305 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -481,6 +481,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
#ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
{ .compatible = "qcom,dsi-phy-28nm-hpm",
.data = &dsi_phy_28nm_hpm_cfgs },
+ { .compatible = "qcom,dsi-phy-28nm-hpm-fam-b",
+ .data = &dsi_phy_28nm_hpm_famb_cfgs },
{ .compatible = "qcom,dsi-phy-28nm-lp",
.data = &dsi_phy_28nm_lp_cfgs },
#endif
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index c4069ce6afe6..24b294ed3059 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -40,6 +40,7 @@ struct msm_dsi_phy_cfg {
};
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index b3f678f6c2aa..3b9300545e16 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -142,6 +142,24 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
.num_dsi_phy = 2,
};
+const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs = {
+ .type = MSM_DSI_PHY_28NM_HPM,
+ .src_pll_truthtable = { {true, true}, {false, true} },
+ .reg_cfg = {
+ .num = 1,
+ .regs = {
+ {"vddio", 100000, 100},
+ },
+ },
+ .ops = {
+ .enable = dsi_28nm_phy_enable,
+ .disable = dsi_28nm_phy_disable,
+ .init = msm_dsi_phy_init_common,
+ },
+ .io_start = { 0x1a94400, 0x1a94800 },
+ .num_dsi_phy = 2,
+};
+
const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
.type = MSM_DSI_PHY_28NM_LP,
.src_pll_truthtable = { {true, true}, {true, true} },
--
2.21.0
next prev parent reply other threads:[~2019-09-26 10:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-26 10:52 [PATCH v2 0/5] DRM/MSM: Add support for MSM8956 and Adreno 510 kholk11
2019-09-26 10:52 ` [PATCH v2 1/5] drm/msm/mdp5: Add optional TBU and TBU_RT clocks kholk11
2019-10-10 18:57 ` Sean Paul
2019-09-26 10:52 ` [PATCH v2 2/5] drm/msm/mdp5: Add configuration for msm8x56 kholk11
2019-09-26 10:52 ` kholk11 [this message]
2019-10-10 18:58 ` [PATCH v2 3/5] drm/msm/dsi: Add configuration for 28nm PLL on family B Sean Paul
2019-09-26 10:52 ` [PATCH v2 4/5] drm/msm/dsi: Add configuration for 8x56 kholk11
2019-09-26 10:52 ` [PATCH v2 5/5] drm/msm/adreno: Add support for Adreno 510 GPU kholk11
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190926105256.61412-4-kholk11@gmail.com \
--to=kholk11@gmail.com \
--cc=airlied@linux.ie \
--cc=bjorn.andersson@linaro.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=georgi.djakov@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=marijns95@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean@poorly.run \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).