Re: [PATCH] clk: qcom: mmcc8974: move gfx3d_clk_src from the mmcc to rpm

[Brian Masney <masneyb@onstation.org>]

On Sat, Nov 16, 2019 at 05:27:36PM -0800, Stephen Boyd wrote:
> Quoting Brian Masney (2019-11-16 10:54:57)
> > > diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
> > > index bcb0a397ef91..015426262d08 100644
> > > --- a/drivers/clk/qcom/mmcc-msm8974.c
> > > +++ b/drivers/clk/qcom/mmcc-msm8974.c
> > > @@ -2411,7 +2399,6 @@ static struct clk_regmap *mmcc_msm8974_clocks[] = {
> > >       [VFE0_CLK_SRC] = &vfe0_clk_src.clkr,
> > >       [VFE1_CLK_SRC] = &vfe1_clk_src.clkr,
> > >       [MDP_CLK_SRC] = &mdp_clk_src.clkr,
> > > -     [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr,
> > >       [JPEG0_CLK_SRC] = &jpeg0_clk_src.clkr,
> > >       [JPEG1_CLK_SRC] = &jpeg1_clk_src.clkr,
> > >       [JPEG2_CLK_SRC] = &jpeg2_clk_src.clkr,
> > 
> > I just realized that I also need to remove the GFX3D_CLK_SRC #define
> > from include/dt-bindings/clock/qcom,mmcc-msm8974.h. I'll send out a v2
> > tomorrow evening.
> > 
> 
> Please don't change the binding. In reality the define will never be
> used but also in reality the clk exists, so it's fine to leave it in the
> binding.

OK, that makes sense. Thanks for your help on this.

Brian