From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: arm@kernel.org, soc@kernel.org
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Andy Gross <agross@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>,
Kevin Hilman <khilman@baylibre.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Douglas Anderson <dianders@chromium.org>,
Amit Kucheria <amit.kucheria@linaro.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
Veerabhadrarao Badiganti <vbadigan@codeaurora.org>,
Dikshita Agarwal <dikshita@codeaurora.org>,
Sibi Sankar <sibis@codeaurora.org>,
Sricharan R <sricharan@codeaurora.org>,
Stephen Boyd <swboyd@chromium.org>, Alex Elder <elder@linaro.org>,
Alexandre Courbot <acourbot@chromium.org>,
Balakrishna Godavarthi <bgodavar@codeaurora.org>,
Christian Lamparter <chunkeey@gmail.com>,
David Dai <daidavid1@codeaurora.org>,
Harigovindan P <harigovi@codeaurora.org>,
Loic Poulain <loic.poulain@linaro.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Matthias Kaehlcke <mka@chromium.org>,
Odelu Kukatla <okukatla@codeaurora.org>,
Rajeshwari <rkambl@codeaurora.org>,
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>,
Sandeep Maheswaram <sanm@codeaurora.org>,
Sivaprakash Murugesan <sivaprak@codeaurora.org>,
Stanimir Varbanov <stanimir.varbanov@linaro.org>,
Stephan Gerhold <stephan@gerhold.net>,
Taniya Das <tdas@codeaurora.org>,
Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Subject: [GIT PULL] Qualcomm ARM64 DT updates for v5.7
Date: Tue, 17 Mar 2020 21:38:23 -0700 [thread overview]
Message-ID: <20200318043823.GA470201@yoga> (raw)
The following changes since commit bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9:
Linux 5.6-rc1 (2020-02-09 16:08:48 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.7
for you to fetch changes up to dfaf16014f55eebbb2a812c8ebdc6ce30681bb81:
arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware (2020-03-16 22:20:34 -0700)
----------------------------------------------------------------
Qualcomm ARM64 DT updates for v5.7
This brings initial support for the SM8250 and IPQ6018 platforms.
SDM845 gets audio, PCIe and IP-accelerator support, and the interconnect
providers are refactored. The Lenovo Yoga C630 has audio enabled and the
DB845c has PCIe, analog audio and low-speed interfaces enabled. The
SDM845 MTP has its display enabled and firmware location updated to
match linux-firmware.
SC7180 gains CPU topology and power properties. Interconnect providers,
eMMC, SD-card, multimedia clocks, display, Bluetooth, Venus are added.
Critical trip points are added as well as various fixes.
For MSM8916 FastRPC support is added, ETM power management and reserved
memory for Samsung A2015 are corrected.
MSM8996 switches to generic QMP phy driver for its UFS support. MSM8998
temporarily disables part of Coresight to boot without
clk_ignore_unused. CEQ for eMMC on QCS404 is enabled.
Fixes throughout the platforms to fix binding compliance, correct
compatibles for SDHCI nodes and add gpio-ranges.
----------------------------------------------------------------
Alex Elder (1):
arm64: dts: sdm845: add IPA information
Alexandre Courbot (1):
arm64: dts: qcom: add Venus firmware node on Cheza
Amit Kucheria (3):
arm64: dts: qcom: msm8916:: Add qcom,tsens-v0_1 to msm8916.dtsi compatible
arm64: dts: qcom: msm8996:: Add qcom,tsens-v2 to msm8996.dtsi compatible
arm64: dts: qcom: msm8998: Fix cpu compatible
Balakrishna Godavarthi (1):
arm64: dts: qcom: sc7180: Add bluetooth node on SC7180 IDP board
Bjorn Andersson (8):
arm64: dts: qcom: sdm845: Add first PCIe controller and PHY
arm64: dts: qcom: sdm845: Add second PCIe PHY and controller
arm64: dts: qcom: db845c: Enable PCIe controllers
arm64: dts: qcom: sdm845-mtp: Add Truly display
arm64: dts: qcom: msm8996: Define parent clocks for gcc
arm64: dts: qcom: msm8996: Use generic QMP driver for UFS
arm64: dts: qcom: msm8998-mtp: Disable funnel 4 and 5
arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
Christian Lamparter (1):
ARM64: dts: qcom: add gpio-ranges property
David Dai (1):
arm64: dts: sdm845: Redefine interconnect provider DT nodes
Dikshita Agarwal (2):
arm64: dts: sc7180: Add Venus video codec DT node
arm64: dts: sc7180: Add Venus firmware subnode
Douglas Anderson (6):
arm64: dts: sc7180: Add the sleep_clk to gcc-sc7180 node
arm64: dts: qcom: qcs404: Fix sdhci compat string
arm64: dts: qcom: sdm845: Add the missing clocks on the dispcc
arm64: dts: qcom: sdm845: Add missing clocks / fix names on the gpucc
arm64: dts: qcom: sdm845: Add the missing clock on the videocc
arm64: dts: sc7180: Add unit name to soc node
Harigovindan P (1):
arm64: dts: sc7180: add display dt nodes
Loic Poulain (1):
arm64: dts: qcom: apq8016-sbc: Remove wrong regulator supply
Mathieu Poirier (1):
arm64: dts: msm8916: Properly deal with ETMv4 power management
Matthias Kaehlcke (1):
arm64: dts: sc7180: Move venus node to the correct position
Odelu Kukatla (1):
arm64: dts: sc7180: Add interconnect provider DT nodes
Rajendra Nayak (3):
arm64: dts: qcom: sc7180: Add dynamic CPU power coefficients
arm64: dts: qcom: sc7180: Add CPU capacity values
arm64: dts: qcom: sc7180: Add CPU topology
Rajeshwari (1):
arm64: dts: qcom: sc7180: Added critical trip point Thermal-zones node
Sai Prakash Ranjan (1):
arm64: dts: qcom: sc7180: Add iommus property to QUP0 and QUP1
Sandeep Maheswaram (1):
arm64: dts: qcom: sc7180: Correct qmp phy reset entries
Sibi Sankar (2):
arm64: dts: qcom: sdm845: Add OSM L3 interconnect provider
arm64: dts: qcom: sc7180: Add OSM L3 interconnect provider
Sivaprakash Murugesan (1):
arm64: dts: ipq6018: Add a few device nodes
Sricharan R (2):
dt-bindings: qcom: Add ipq6018 bindings
arm64: dts: Add ipq6018 SoC and CP01 board support
Srinivas Kandagatla (7):
arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes
arm64: dts: msm8916: Add fastrpc node
arm64: dts: qcom: sdm845: add slimbus nodes
arm64: dts: qcom: sdm845: add apr nodes
arm64: dts: qcom: c630: Enable audio support
arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s
arm64: dts: qcom: db845c: add analog audio support
Stanimir Varbanov (1):
arm64: dts: sdm845: follow venus-sdm845v2 DT binding
Stephan Gerhold (1):
arm64: dts: qcom: msm8916-samsung-a2015: Reserve Samsung firmware memory
Stephen Boyd (2):
arm64: dts: qcom: sdm845: Disable pwrkey on Cheza
arm64: dts: qcom: pm6150: Add label to pwrkey node
Taniya Das (1):
arm64: dts: sc7180: Add clock controller nodes
Veerabhadrarao Badiganti (3):
arm64: dts: qcom: sc7180: Add nodes for eMMC and SD card
arm64: dts: qcom: qcs404: Enable CQE support for eMMC
arm64: dts: qcom: sc7180: Update reg names for SDHC
Venkata Narendra Kumar Gutta (1):
arm64: dts: qcom: sm8250: Add sm8250 dts file
Documentation/devicetree/bindings/arm/qcom.yaml | 8 +
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 1 -
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 6 -
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 64 ++
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 443 ++++++++++++++
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 +
.../dts/qcom/msm8916-samsung-a2015-common.dtsi | 8 +
arch/arm64/boot/dts/qcom/msm8916.dtsi | 21 +-
arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8996.dtsi | 33 +-
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 8 +-
arch/arm64/boot/dts/qcom/msm8998.dtsi | 16 +-
arch/arm64/boot/dts/qcom/pm6150.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm8998.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 1 +
arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 +-
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 64 +-
arch/arm64/boot/dts/qcom/sc7180.dtsi | 605 ++++++++++++++++++-
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 15 +
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 283 +++++++++
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 89 +++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 672 ++++++++++++++++++++-
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 114 ++++
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 29 +
arch/arm64/boot/dts/qcom/sm8250.dtsi | 444 ++++++++++++++
27 files changed, 2868 insertions(+), 69 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sm8250-mtp.dts
create mode 100644 arch/arm64/boot/dts/qcom/sm8250.dtsi
reply other threads:[~2020-03-18 4:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200318043823.GA470201@yoga \
--to=bjorn.andersson@linaro.org \
--cc=acourbot@chromium.org \
--cc=agross@kernel.org \
--cc=amit.kucheria@linaro.org \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=bgodavar@codeaurora.org \
--cc=chunkeey@gmail.com \
--cc=daidavid1@codeaurora.org \
--cc=dianders@chromium.org \
--cc=dikshita@codeaurora.org \
--cc=elder@linaro.org \
--cc=harigovi@codeaurora.org \
--cc=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=mathieu.poirier@linaro.org \
--cc=mka@chromium.org \
--cc=okukatla@codeaurora.org \
--cc=olof@lixom.net \
--cc=rkambl@codeaurora.org \
--cc=rnayak@codeaurora.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sanm@codeaurora.org \
--cc=sibis@codeaurora.org \
--cc=sivaprak@codeaurora.org \
--cc=soc@kernel.org \
--cc=sricharan@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=stanimir.varbanov@linaro.org \
--cc=stephan@gerhold.net \
--cc=swboyd@chromium.org \
--cc=tdas@codeaurora.org \
--cc=vbadigan@codeaurora.org \
--cc=vnkgutta@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox